DOI QR코드

DOI QR Code

Effect of postulated crack location on the pressure-temperature limit curve of reactor pressure vessel

  • 투고 : 2019.03.05
  • 심사 : 2019.05.02
  • 발행 : 2019.09.25

초록

In accordance with ASME Boiler and Pressure Vessel (B&PV) Code Sec.XI Appendix. G, a postulated crack is located at the beltline of a reactor pressure vessel because the neutron flux at the beltline is higher than elsewhere. This means that the distance between the core and the semi-spherical bottom head is longer than the distance between the core and the cylindrical beltline. However, several Small and Medium sized Reactors have bottom heads with diverse shapes, including dished or semi-elliptical shapes, to satisfy the requirement and performance. So, the aim of this paper is to evaluate the effect of crack location on Pressure-Temperature limit curve. To do this, two types of postulated crack location, such as beltline and semi-elliptical bottom head, were adopted to derive the Pressure-Temperature limit curve. Also, parametric studies for neutron flux, crack shape and so on were performed. As a result, core critical temperature of semi-elliptical bottom head is found to higher than that of beltline even when they have same values of thickness and neutron flux. This result will be useful to enhance the understanding of Pressure-Temperature limit curve.

키워드

참고문헌

  1. ASME Boiler and Pressure Vessel Code, Sec.XI, Appendix G, Fracture Toughness Criteria for Protection against Failure, American Society of Mechanical Engineers, 2010.
  2. 10CFR50, Appendix G, Fracture Toughness Requirements, Nuclear Regulatory Commission, 1997.
  3. IAEA, Status of Small and Medium Sized Reactor Designs, International Atomic Energy Agency, 2012.
  4. S.Y. Park, et al., P-T limit curve of reactor pressure vessel with nozzle corner crack, in: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT), 2011.
  5. S. Yin, et al., Fracture analysis for reactor pressure vessel nozzle corner crack, in: 22nd International Conference on Structural Mechanics in Reactor Technology (SMiRT), 2013.
  6. USNRC Regulatory Guide 1.99 Rev.2, Radiation Embrittlement of Reactor Vessel Materials, U.S. Nuclear Regulatory Commission, 1988.
  7. S.B. Choi, et al., Evaluation of constraint effect due to crack location and bottom head shape, in: Proceedings of the ASME 2016 Pressure Vessel & Piping Division Conference, 2016.
  8. ABAQUS, User's Manual, 2016.
  9. ASME Boiler and Pressure Vessel Code, Sec.II Table D, Properties, American Society of Mechanical Engineers, 2007.
  10. Korea Electric Power Industry Code, MIZ Appendix G, Fracture Toughness Criteria for Portection against Failure, Korea Electric Association, 2010.
  11. S.B. Choi, et al., Parametric study on pressure-temperature limit curve, in: Proceedings of the ASME 2016 Pressure Vessel & Piping Division Conference, 2016.