Structural Engineering and Mechanics

  • 제72권1호
  • /
  • Pages.19-30
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and analytical investigation of the shear behavior of strain hardening cementitious composites

  • Georgiou, Antroula V. (Department of Civil and Environmental Engineering, University of Cyprus) ;
  • Pantazopoulou, Stavroula J. (Dept. Civil Engrg., Lassonde Fac. of Engrg., York Univ.)
  • 투고 : 2018.10.08
  • 심사 : 2019.05.17
  • 발행 : 2019.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

The mechanical behavior of Fiber Reinforced Cementitious Composites (FRCC) under direct shear is studied through experiment and analytical simulation. The cementitious composite considered contains 55% replacement of cement with fly ash and 2% (volume ratio) of short discontinuous synthetic fibers (in the form of mass reinforcement, comprising PVA - Polyvinyl Alcohol fibers). This class of cementitious materials exhibits ductility under tension with the formation of multiple fine cracks and significant delay of crack stabilization (i.e., localization of cracking at a single location). One of the behavioral parameters that concern structural design is the shear strength of this new type of fiber reinforced composites. This aspect was studied in the present work with the use of Push-off tests. The shear strength is then compared to the materials' tensile and splitting strength values.

키워드

참고문헌

  1. ACI 318M-14 (2015), Building Code Requirements for Reinforced Concrete, American Concrete Institute, Michigan, USA.
  2. Archontas, N.D. and Pantazopoulou, S.J. (2015), "Microstructural behavior and mechanics of nano-modified cementitious materials", Adv. Concrete Construct., 3(1), 15-37. https://doi.org/10.12989/acc.2015.3.1.015.
  3. ASTM C496 (2006), "Standard test method for splitting tensile strength of cylindrical concrete specimens", ASTM International, Pennsylvania, USA.
  4. ASTM C618 (2008), "Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use", ASTM International, Pennsylvania, USA.
  5. Birkeland, P. W. and Birkeland, H. W. (1966), "Connections in Precast Concrete Construction", J. American Concrete Inst., 63(6), 345-368.
  6. Buyukozturk, O., Bakhoum, M and Beattie, S. (1990), "Shear behavior of joints in precast concrete segmental bridges", J. Struct. Eng., 116(12), 3380-3401. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:12(3380).
  7. Campione, G., La Mendola, L and Papia, M. (2006), "Shear strength of steel fiber reinforced concrete beams with stirrups", Struct. Eng. Mech., 24(1), https://doi.org/10.12989/sem.2006.24.1.107.
  8. Chang-Geun, C., Gee-Joo, H. and Yun-Yong, K. (2008), "Nonlinear model of reinforced concrete frames retrofitted by infilled HPFRCC walls", Struct. Eng. Mech., 30(2), 211-223. https://doi.org/10.12989/sem.2008.30.2.211.
  9. EN 12350-8:2010 (2010), "Testing fresh concrete Part 8: Self - compacting concrete - Slump- flow test", European Committee for Standardization.
  10. EN 206:2013 (2013), "Concrete - Specification, performance, production and conformity", European Committee for Standardization.
  11. Georgiou, A.V. and Pantazopoulou, S.J. (2016a), "Mechanical properties of fiber reinforced cementitious composites with high amounts of fly ash as cement replacement", ICCS16 Second International Conference on Concrete Sustainability, Madrid, Spain.
  12. Georgiou, A. V and Pantazopoulou, S. J. (2016b), "Effect of fiber length and surface characteristics on the mechanical properties of cementitious composites", Construct. Build. Mater., 125(10), 1216-1228. https://doi.org/10.1016/j.conbuildmat.2016.09.009.
  13. Georgiou, A. V and Pantazopoulou, S. J. (2016c), "Use of waste fly ash from power plants for use in cementitious composites for structural elements", 4th International Conference on Sustainable Solid Waste Management, Limasol, Cyprus. June.
  14. Georgiou, A.V. and Pantazopoulou, S.J. (2017), "Behavior of strain hardening cementitious composites in flexure/shear", J. Mater. Civil Eng., 29(10), 4017192. http://doi.org/10.1061/(ASCE)MT.1943-5533.0002041
  15. Georgiou, A.V. and Pantazopoulou, S.J. (2018), "Experimental investigation on the confining effect of fibers in SHFRCC", Compos. Struct., 102, 29-37. https://doi.org/10.1016/j.compstruct.2017.09.110.
  16. Kang, S., Tan, K., Zhou, X.H., Yang, B. (2017), "Experimental investigation on shear strength of engineered cementitious composites", Eng. Struct., 143, 141-151. https://doi.org/10.1016/j.engstruct.2017.04.019.
  17. Li, V.C., Wu, C., Wang, S., Ogawa, A and Saito, T. (2003), "Interface tailoring for strain-hardening Polyvinyl Alcohol-Engineered Cementitious Composite (PVA-ECC)", ACI Mater. J., 99(5), 463-472.
  18. Mast, R.F. (1968), "Auxiliary reinforcement in concrete connections", Proceedings ASCE, 94(ST6), 1485-1504.
  19. Mattock, A.H and Hawkins, N.M. (1972), "Shear transfer in reinforced concrete-recent research", PCI J., 77(2), 55-79. https://doi.org/10.15554/pcij.03011972.55.75
  20. Naaman, A.E. and Reinhardt, H. (2006), "Proposed classification of HPFRC composites based on their tensile response", Mater. Struct., 39(5), 547-555. https://doi.org/10.1617/s11527-006-9103-2.
  21. Orod, Z., Hamid Reza, K. (2016), "Experimental investigation on self-compacting concrete reinforced with steel fibers", Struct. Eng. Mech., 59(1), 133-151. https://doi.org/10.12989/sem.2016.59.1.133.
  22. Parra-Montesinos, G.J. (2005), "High-performance fiberreinforced cement composites: An alternative for seismic design of structures", ACI Struct. J., 102(5), 668-675.
  23. Qissab, M. A. and Salman, M. M. (2018), "Shear strength of nonprismatic steel fiber reinforced concrete beams without stirrups", Struct. Eng. Mech., 67(4), 347-358. https://doi.org/10.12989/sem.2018.67.4.347.
  24. Toshiyuki, K., Kabele, P., Fukuyama, H., Uchida, Y., Suwada, H and Slowik, V. (2013), Strain Hardening Cement Composites: Structural Design and Performance, Springer, Netherlands. http://doi.org/10.1007/978-94-007-4836-1
  25. Valle, M and Buyukozturk, O. (1993), "Behavior of fiber reinforced high-strength concrete under direct shear", ACI Mater. J., 90(2), 122-133.
  26. Vecchio, F.J and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI Struct. J., 83(2), 219-231.
  27. Wang, S. and Li, V.C. (2006), "Polyvinil alcohol fiber reinforced engineered cementitious composites: material design and performances", Proceedings of International workshop on HPFRCC in Structural Applications, Honolulu, Hawaii, USA.
  28. Zhao, P.Z., Kanf, S.B., Yang, B. (2017), "Shear strength of engineered cementitious composites under Push-Off Loads", Proceedings of 6th International Workshop on Performance, Protection and Strengthening of Structures under Extreme Loading, Guangzhou (Canton), China, December.