DOI QR코드

DOI QR Code

LCD 제조공정에서 사용되는 화학물질의 종류 및 특성

Types & Characteristics of Chemical Substances used in the LCD Panel Manufacturing Process

  • 박승현 (한국산업안전보건공단 산업안전보건연구원) ;
  • 박해동 (한국산업안전보건공단 산업안전보건연구원) ;
  • 노지원 (한국산업안전보건공단 산업안전보건연구원)
  • Park, Seung-Hyun (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency) ;
  • Park, Hae Dong (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency) ;
  • Ro, Jiwon (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency)
  • 투고 : 2019.07.17
  • 심사 : 2019.09.15
  • 발행 : 2019.09.30

초록

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

키워드

참고문헌

  1. Ahn JH, Lee SS. Principles of Photolithography. Physics & high technology. January/February, 2011
  2. American Conference of Governmental Industrial Hygienists(ACGIH). Threshold limit values (TLVs) for chemical substances and physical agents & biological exposure indices (BEIs). ACGIH, Cincinnati (OH); 2018
  3. Anyang General Chemical Co., Ltd. Photoinitiator TPO Product Information. [Accessed 11 July 2019] Available from: http://www.sellchems.com/products/fine-chemical/ photoinitiator-tpo-cas-75980-60-8/
  4. Chae HS. Synthesis of novel acrylate copolymers and their application to column spacer as negative photoresist. Graduate school, Sungkyunkwan University, 2009
  5. Chang TY, Huang KH, Liu CS, et al. Exposure to volatile organic compounds and kidney dysfunction in thin film transistor liquid crystal display(TFT-LCD) workers. J hazard mater 2010;178:934-940 DOI:10.1016/j.jhazmat.2010.02.027
  6. Haq N, inventor. Photoresist stripper comprising a pyrrolidinone, a diethylene glycol ether, a polyglycol and a quaternary ammonium hydroxide. United States Patent US 4,744,834. 1988 May 17
  7. Henderson research group. Introduction to DNQ-Novolac resists. [Accessed 11 July 2019] Available from: https://sites.google.com/site/hendersonresearchgroup/ helpful-primers-introductions/intro-to-dnqnovolac-resists
  8. International Labour Organization(ILO). Encyclopedia of occupational health and safety. 4th ed. Geneva, ILO; 1998
  9. Jeong BG, Kim SW, Lee YJ. An assembly scheduler for TFT LCD manufacturing. Computers & industrial engineering 2001;41:37-58 https://doi.org/10.1016/S0360-8352(01)00041-9
  10. Jeong JS. Characteristic study on thermosonic anisotropic conductive film(ACF) bonding for chip on film(COF) packaging. Graduate school, Chung-Ang university, 2012
  11. Kang SJ. Design optimization of super-size TAB IC final bonding tool unit in LCD module process. Graduate school, Hanyang university, 2007
  12. Kim JH, Choi DH. Functional materials for the components of TFT-LCD. Prospectives of industrial chemistry 2004;7(3):1-15
  13. Kim KW, Chung EK, Park SH, et al. Characteristics of worker's exposure to hazardous agents in LCD Manufacturing Processes. Occupational Safety & Health Research Institute, 2016-770, 2016
  14. Korea Occupational Safety & Health Agency(KOSHA). Chemical Information. [Accessed 12 July 2019] Available from https://msds.kosha.or.kr/kcic/english/msdssearch.do
  15. Lee CH, Wang CL, Lin HF, Chai CY, Hong MY, Ho CK. Toxicity of tetramethylammonium hydroxide: Review of two fatal cases of dermal exposure and development of an animal model. Toxicol Ind Health 2011;27(6):497-503 DOI: 10.1177/0748233710391990
  16. Lee SD, Yu CJ. Recent trend of the organic flat panel display technology and the LCD technology. J. Korean Inst Electr Electron Mater Eng 2002;15(12):23-31
  17. Lee SH, Yoon TH. LCD(Liquid Crystal Display) and liquid crystal technology. Physics & high technology. October 2008
  18. Lin CC, Yang CC, Ger J, Deng JF, Hung DZ. Tetramethylammonium hydroxide poisoning. Clin Toxicol 2010;48:213-7 DOI: 10.3109/15563651003627777
  19. Ministry of Employment of Labor(MOEL). Occupational exposure limits of chemical substances and physical agents. MOEL Notice of Korea 2018-62, 2018
  20. Park SH, Park JS, You KH, Shin HC, Kim HO. Tetramethylammonium hydroxide poisoning during a pallet cleaning demonstration. J Occup Health 2013;55:120-124 DOI: 10.1539/joh.12-0143-cs
  21. Park SH, Shin JA, Lee GY, Park HD, et al. Characteristics of the working environment and hazardous agents in semiconductor manufacturing plants. Occupational Safety and Health Research Institute, 2012-92, 2012
  22. Takenoshita K, et al., inventor, Samsung Electronics Co., Ltd., assignee. Plasma generating device, plasma generating method, and method for suppressing ozone generation. Republic of Korea, Patent KR 101601654. 2016 Mar 3
  23. Wu CH, Feng CT, Lo YS, et al. Determination of volatile organic compounds in workplace air by multisorbent adsorption/thermal desorption-GC/MS. Chemosphere 2004;56:71-80 Doi:10.1016/j.chemosphere.2004.02.003
  24. Wu CL, Su SB, Chen JL, Lin HJ, Guo HR. Mortality from dermal exposure to tetramethylammonium hydroxide. J Occup health 2008;50;99-102 DOI: 10.1539/joh.x7001
  25. Yi GY, Lee NR, You KH. Exposure and management of insoluble indium compound II. Occupational Safety and Health Research Institute, 2012-1286, 2012
  26. Yoon SH. Organic material for LCD components. Polymer science and technology 2004;15(6):674-682