DOI QR코드

DOI QR Code

Experimental Study on the Flexural Capacity of AU Composite Beam After the Heating Test

가열 시험을 거친 AU 합성보의 휨 성능에 관한 실험 연구

  • Received : 2019.08.14
  • Accepted : 2019.09.10
  • Published : 2019.09.15

Abstract

AU(A plus U-shaped) composite beam was developed for reducing the story height in the residential buildings, and saving the cosrtuction cost of floor structures. Structural performance and economic feasibility of the composite beam have been sufficiently approved through the structural experiments and the analytical studies. Fire safety for the practical application of the composite beam has also been verified through the fire resistance tests and the heat transfer analyses. In this study 2-points bending tests were performed on the four specimens already tested for fire resistance to evaluate the residual bending strength of AU composite beam after fire accident. The same bending test was performed on the one fresh specimen having the same section and span of the specimens for practically comparative study.

Keywords

References

  1. Kim, D. B., Kim, Y. H., Yom, K. S., & Choi, B. J. (2015). Flexural Strength Evaluation of Infilled-type Composite Beam (AU Beam) about the Internal Reinforcement. Proceedings of the Architectural Institute of Korea, Republic of Korea, Vol.35, Vol.2, pp.433-4834
  2. Kim, D. B., Kim, Y. H., Kang, C. K., Kim, D. J., & Choi, B. J. (2016). Shear Resistance Capacity of Cap-type Shear Connector in the Constant Interval. Proceedings of the Architectural Institute of Korea, Republic of Korea, Vol.36, No.1, pp.321-322
  3. Kim, D. B., Kim, Y. H., Oh, M. H., & Kim, M. H., "Experimental Study on the Flexural Capacity of the Concrete-Filled Composite Beam with Exposed Top Flange", Journal of Korean Society of Hazard Mitigation, Vol.17, No.4, pp.1-9, 2017 https://doi.org/10.9798/kosham.2017.17.4.1
  4. Lee, M. H., Oh, M. H., Kim, Y. H., Jeong, S., & Kim, M. H., "Experimental Study on the Shear Capacity of Slim AU Composite Beam", Journal of Korean Association for Spatial Structures, Vol.17, No.3, pp.99-105, 2017 https://doi.org/10.9712/KASS.2017.17.3.099
  5. Kim, D. B., Lee, M. H., Lee, Y. S., Kim, D. J., & Kim, M. H., "The Flexural Capacity Evaluation about Composite-stage of Semi Slim AU Composite Beam for Saving Story Height", Journal of Korean Society of Advanced Composite Structures, Vol.9, No.1, pp.17-25, 2018 https://doi.org/10.11004/kosacs.2018.9.1.017
  6. Oh, M. H., Lee, M. S., Kim, Y. H., & Kim, M. H., "Experimental Study on the Shear Capacity of Cap-Type Shear Connectors With Constant Intervals", Journal of Korean Association for Spatial Structures, Vol.18, No.2, pp.121-128, 2018 https://doi.org/10.9712/KASS.2018.18.2.121
  7. Kim, Y. H., Kim, D. B., Kim, D. J., & Kim, M. H., "Safety Evaluation of Semi-Slim AU Composite Beam During Construction", Journal of Korean Association for Spatial Structures, Vol.18, No.3, pp.57-66, 2018 https://doi.org/10.9712/KASS.2018.18.3.57
  8. Oh, M. H., & Kim, M. H., "Fire Resistance Evaluation of SLIM AU Composite Beam", Journal of Korean Association for Spatial Structures, Vol.16, No.4, pp.53-58, 2016 https://doi.org/10.9712/KASS.2016.16.4.053
  9. Kim, M. H., Oh, M. H., & Min, J. K., "Fire Performance Analysis of SLIM AU Composite Beam", Journal of Korean Association for Spatial Structures, Vol.16, No.4, pp.133-140, 2016 https://doi.org/10.9712/KASS.2016.16.4.133