DOI QR코드

DOI QR Code

Power Conversion System for Electric Power Take-off of Agricultural Electric Vehicle

농업용 전기차량의 전기식 동력인출장치용 전력변환시스템

  • Kwak, Bongwoo (Dept. of EV Components & Materials R&D Group, Korea Institute of Industrial Technology) ;
  • Kim, Jonghoon (Dept. of Electrical Engineering, Chungnam National University)
  • Received : 2019.09.06
  • Accepted : 2019.09.26
  • Published : 2019.09.30

Abstract

In this paper, we propose the development of a power conversion system for electric power take-off (e-PTO) of agricultural electric vehicles. Most e-PTOs use commercial power $220V_{AC}$. A bidirectional power conversion system having a two-stage structure consisting of a DC-DC converter and a DC-AC inverter for supplying a high output voltage using a low battery voltage of an agricultural electric vehicle is suitable. we propose a power conversion system consisting of the one-stage dual active bridge (DAB) converter and the two-stage bidirectional full bridge inverter. In addition, we propose a soft start algorithm for reducing the inrush current generated by the link capacitor charging during the initial operation. A 3kW prototype system and its corresponding algorithms have been implemented to verify its effectiveness through experiments.

본 논문은 농업용 전기차량의 전기식 동력인출장치용 전력변환시스템에 대해 제안한다. 대부분의 전기식 동력인출장치(Electric Power Take-Off : e-PTO)는 상용전원 $220V_{AC}$를 사용한다. 농업용 전기차량의 낮은 배터리 전압을 사용하여 높은 출력 전압을 공급하기 위한 DC-DC 컨버터와 DC-AC 인버터로 구성된 2단 구조를 갖는 양방향 전력변환시스템이 적합하다. 제안하는 전력변환시스템은 1단의 Dual Active Bridge(DAB)컨버터와 2단의 양방향 풀 브릿지 인버터로 구성된다. 또한, 초기 구동시 DC 버스단 커패시터 충전에 의해 발생되는 돌입 전류 저감을 위해 소프트 스타트 알고리즘을 제안한다. 3kW급 전력변환시스템 시제품 및 알고리즘을 구현하고 실험을 통해서 실용성을 입증하였다.

Keywords

References

  1. J. H. Lee and I, C Choi, "Development of On-board Generator for Extending Working Hours of Agricultural EV Platform," in Proc. of the 2018 Spring Conference on The Korean Society Automotive Engineers, pp.44-45, 2018.
  2. Y. J. Lee, Y. H. Chang and Y, J, Ryoo, "Platform Design of Caterpillar Typed electrical Vehicle," Journal of Korean Institute of Intelligent Systems, vol.26, no.4, pp.279-285, 2016. DOI: 10.5391/JKIIS.2016.26.4.279
  3. T. Y. Lee, B. G. Cho, Y. H. Cho, C. O. Hong, H. S. Lee and K, Y, Cho, "Design of a 2kW Bidirectional Synchronous DC-DC Converter for Battery Energy Storage System," The Transactions of Korean Institute of Power Electronics, vol.22, no.4, pp.312-323, 2017. https://doi.org/10.6113/TKPE.2017.22.4.312
  4. M. Jabbari, H. Farzanehfard and G. Shahgholian, "Isolated Topologies of Switched Resonator Converters," Journal of Power Electronics, vol.10, no.2, pp. 125-131, 2010. DOI: 10.6113/JPE.2010.10.2.125
  5. L. Chen, H. Wu, Y. Xing and X. Xiao, "Performance evaluation of a 1kW non-isolated high step-up/step-down bidirectional converter for distributed battery storage system," in Proc. of the 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC), pp.1-5, 2015. DOI: 10.1109/IFEEC.2015.7361439
  6. Y. R. Kim and F. S. Kang, "Analysis of failure rate according to capacitor position of bidirectional converter," Journal of inst. Korean, electr, electron. eng., vol.23, no.1, pp.261-265, 2019. DOI: 10.7471/ikeee.2019.23.1.261
  7. B. Zhoa, Q. Yu and W. Sun, "Extended-phaseshift control of isolated bidirectional DC-DC converter for power distribution in microgrid," IEEE Trans. Power Electron., vol.27, no.11, pp. 4667-4680, 2012. DOI: 10.1109/TPEL.2011.2180928
  8. S. H. Lee, J. M. Kwon and B. H. Kwon, "Bi-directional Photovoltaic Inverter with High Efficiency and Low Noise," The Transactions of Korean Institute of Power Electronics, vol.17, no.6, pp.539-545, 2012. https://doi.org/10.6113/TKPE.2012.17.6.539
  9. B. Yang, Y. Gu, W. Cui and X. He, "Improved Transformerless Inverter With Common-Mode Leakage Current Elimination for a Photovoltaic Grid-Connected Power System," IEEE Trans. Power Electron., vol.27, no.2, pp.752-762, 2011. DOI: 10.1109/TPEL.2011.2160359
  10. T. Kerekes, R. Teodorescu, P. Rodriguez, G. Vazquezand and E. Aldabas, "A new high efficiency single-phase transformerless PV inverter topology," IEEE Trans. Ind. Electron., vol.58, no.1, pp.184-191, 2011. DOI: 10.1109/TIE.2009.2024092