References
- National Assembly Budget Office, "Report for required area by power generation source," NABO, p. 5, Sep. 2017.
- Deug-Soo Kim, "A Study on the Improvement Policy Alternatives for Vitalization of City-central Photovoltaic Dissemination," Department of New and Renewable Energy Engineering of Dongguk University, 2019.
- TAIYANG news, 2018.
- Braun, S., Micard, G., Hahn, G., "Solar cell improvement by using a multi busbar design as front electrode," SiliconPV, pp. 3-5, April 2012.
- Walter, J., Tranitz, M., Volk, M., Ebert, C., Eitner, U., "Multiwire interconnection of busbar-free solar cells," Silicon PV, 2014.
- Guo, S., Singh, J.P., Peters, I.M., Aberle, A.G., Walsh, T.M., "A Quantitaive Analysis of Photovvoltaic Modules Using Halved Cells," International Journal of Photoenergy Volume 2013 Article ID 739374, p. 8, 2013.
- Hanifi, H., Schneider, J., Bagdahn, J., "Reduced Shading Effect on Half-Cell Modules-Measurement and Simulation," 31st European Photovoltaic Solar Energy Conference and Exhibition.
- Braun, S., Hahn, G., Nissler, R., Ponisch, C., Habermann, D., "The multi-busbar design: an overview," Energy Procedia, Vol. 43, pp. 86-92, 2013. https://doi.org/10.1016/j.egypro.2013.11.092
- Guo, S.,Schneider, J., Lu, F., Hanifi, H., Turek, M., Dyrba, M.,Peters, I.M., "Investigation of the short-circuit current increase for PV modules using halved silicon wafer solar cells," Solar Energy Materials & Solar Cells, Vol. 133, pp. 240-247, 2015. https://doi.org/10.1016/j.solmat.2014.11.012
- Walter, J., Rendler, L.C., Ebert, C., Kraft, A., Eitner, U., "Solder joint stability study of wire-based interconnection compared to ribbon interconnection," Energy Procedia, Vol. 124, pp. 515-525, 2017. https://doi.org/10.1016/j.egypro.2017.09.288
- Jordan, D.C., Silverman, T.J., Wohlgemuth, J.H., Kurtz, S.R., VanSant, K.T., "Photovoltaic failure and degradation modes," Progress in Photovoltaics: Research and Applications, 2017.
- Kumar, M., Kumar, A., "Performance assessment and dsgradation analysis of solar photovoltaic technologies: A review," Renewablt and Sustainable Energy Reviews, Vol. 78, pp. 554-587, 2017. https://doi.org/10.1016/j.rser.2017.04.083
- Lee, H.-T., Chen, M.-H., "Influence of intermetallic compounds on the adhesive strength of solder joints," Materials Science and Engineering, Vol. A333, pp. 24-34, 2002.
- Schmitt, P., Kaiser, P., Savio, C., Tranitz, M., Eitner, U., "Intermetallic Phase Growth and Reliability of Sn-Ag-Soldered Solar Cell Joints," SiliconPV, 2012.
- Yang, T.L., Huang, K.Y., Yang, S., Hsieh, H.H., Kao, C.R., "Growth kinetics of in silicon solar cells with a sintered Ag metallization layer," Solar Energy Materials & Solar Cells, Vol. 123, pp. 139-143, 2014. https://doi.org/10.1016/j.solmat.2014.01.018
- Geipel, T., Moeller, M., Walter, J., Kraft, A., Eitner, U., "Intermetallic comounds in solar cell interconnections: Microstructure and growth kenetics," Solar Energy Materials & Solar Cells, Vol. 159, pp. 370-388, 2017. https://doi.org/10.1016/j.solmat.2016.08.039
- Jeon, Y.-J., "A Study on the Thermal Characteristics of Photovoltaic Module Ribbon Joints," School of Mechanical Engineering of Chung-Ang University, Aug. 2016.
- Itoh, U., Yoshida, M., Tokuhisa, H., Takeuchi, K., Takemura, Y., "Solder joint failure modes in the conventional crystalline Si module," Energy Procedia, Vol. 55, pp. 464-468, 2014. https://doi.org/10.1016/j.egypro.2014.08.010