DOI QR코드

DOI QR Code

Vibration control for serviceability enhancement of offshore platforms against environmental loadings

  • Lin, Chih-Shiuan (National Rail Transit Electrification and Automation Engineering Technology Research Center, The Hong Kong Polytechnic University) ;
  • Liu, Feifei (School of Civil Engineering, Qingdao University of Technology) ;
  • Zhang, Jigang (School of Civil Engineering, Qingdao University of Technology) ;
  • Wang, Jer-Fu (Department of Civil and Disaster Prevention Engineering, National United University) ;
  • Lin, Chi-Chang (Department of Construction Engineering, Chaoyang University of Technology)
  • Received : 2018.07.06
  • Accepted : 2019.05.10
  • Published : 2019.09.25

Abstract

Offshore drilling has become a key process for obtaining oil. Offshore platforms have many applications, including oil exploration and production, navigation, ship loading and unloading, and bridge and causeway support. However, vibration problems caused by severe environmental loads, such as ice, wave, wind, and seismic loads, threaten the functionality of platform facilities and the comfort of workers. These concerns may result in piping failures, unsatisfactory equipment reliability, and safety concerns. Therefore, the vibration control of offshore platforms is essential for assuring structural safety, equipment functionality, and human comfort. In this study, an optimal multiple tuned mass damper (MTMD) system was proposed to mitigate the excessive vibration of a three-dimensional offshore platform under ice and earthquake loadings. The MTMD system was designed to control the first few dominant coupled modes. The optimal placement and system parameters of the MTMD are determined based on controlled modal properties. Numerical simulation results show that the proposed MTMD system can effectively reduce the displacement and acceleration responses of the offshore platform, thus improving safety and serviceability. Moreover, this study proposes an optimal design procedure for the MTMD system to determine the optimal location, moving direction, and system parameters of each unit of the tuned mass damper.

Keywords

References

  1. Abdel-Rohman, M. (1996), "Structural control of a steel jacket platform", Struct. Eng. Mech., 4(2), 125-138. https://doi.org/10.12989/sem.1996.4.2.125.
  2. Abe, M. and Igusa, T. (1995), "Tuned mass dampers for structures with closely spaced natural frequencies", Earthq. Eng. Struct. D., 24(2), 247-261. https://doi.org/10.1002/eqe.4290240209.
  3. Alves, R.M. and Batista, R.C. (1999), "Active/passive control of heave motion for TLP type of offshore platforms", Proceedings of the 9th International Offshore and Polar Engineering Conference (ISOPE), Brest, France.
  4. Aly, A.M. (2014), "Vibration control of high-rise buildings for wind: a robust passive and active tuned mass damper", Smart Struct. Syst., 13(3), 473-500. https://doi.org/10.12989/sss.2014.13.3.473.
  5. Bjerkas, M. (2006), "Wavelet transforms and ice actions on structures", Cold Reg. Sci. Technol., 44(2), 159-169. https://doi.org/10.1016/j.coldregions.2005.11.003.
  6. Bortoluzzi, D., Casciati, S., Elia, L. and Faravelli, L. (2015), "Design of a TMD solution to mitigate wind-induced local vibrations in an existing timber footbridge", Smart Struct. Syst., 16(3), 459-478. http://dx.doi.org/10.12989/sss.2015.16.3.459.
  7. Chandrasekaran, S., Kumar, D. and Ramanathan, R. (2013), "Dynamic response of tension leg platform with tuned mass dampers", J. Naval Archit. Mar. Eng., 10(2), 1813-8235. https://doi.org/10.3329/jname.v10i2.16184.
  8. Chen, G. and Wu, J. (2003), "Experimental study on multiple tuned mass dampers to reduce seismic responses of a threestory building structure", Earthq. Eng. Struct. D., 32(5), 793-810. https://doi.org/10.1002/eqe.249.
  9. Debnath, N. and Dutta, A. (2016), "Multi-modal vibration control of truss bridges with tuned mass dampers under general loading", J. Vib. Control, 22(20), 4121-4140. https://doi.org/10.1177/1077546315571172.
  10. GB/T 13442-1992 (1992), Reduced Comfort Boundary and Evaluation Criteria for Human Exposure to Whole-Body Vibration, Standardization Administration of China; Beijing, China.
  11. ISO 2631-1 (1997), Evaluation of Human Exposure to Whole-Body Vibration. Part1: General requirements, International Standard Organization for Standardization; Geneva, Switzerland.
  12. Kareem, A. (1983), "Mitigation of wind induced motion of tall buildings", J. Wind Eng. Ind. Aerod., 11(1-3), 273-284. https://doi.org/10.1016/0167-6105(83)90106-X.
  13. Kandasamy, R., Cui, F., Townsend, N., Foo, C.C., Guo, J., Shenoi, A. and Xiong, Y. (2016), "A review of vibration control methods for marine offshore structures", Ocean Eng., 127, 279-297. https://doi.org/10.1016/j.oceaneng.2016.10.001.
  14. Li, Z., Lu, P. and Sodhi, D. (2004), "Ice engineering sub-areas in Bohai from ice physical and mechanical parameters", Adv. Water Sci., 15(5), 598-602. [in Chinese] https://doi.org/10.3321/j.issn:1001-6791.2004.05.011
  15. Lin, C.C., Hu, C.M., Wang, J.F. and Hu, R.Y. (1994), "Vibration control effectiveness of passive tuned mass dampers", J. Chin. Inst. Eng., 17(3), 367-376. https://doi.org/10.1080/02533839.1994.9677600.
  16. Lin, C.C., Ueng, J.M. and Huang, T.C. (2000), "Seismic response reduction of irregular buildings using passive tuned mass dampers", Eng. Struct., 22(5), 513-524. https://doi.org/10.1016/S0141-0296(98)00054-6.
  17. Lin, C.C., Wang, J.F. and Ueng, J.M. (2001), "Vibration control identification of seismically-excited MDOF structure-PTMD systems", J. Sound Vib., 240(1), 87-115. https://doi.org/10.1006/jsvi.2000.3188.
  18. Lin, C.C., Wang, J.F., Lien, C.H., Chiang, H.W. and Lin, C.S. (2010), "Optimum design and experimental study of multiple tuned mass dampers with limited stroke", Earthq. Eng. Struct. D., 39(14), 1631-1651. https://doi.org/10.1002/eqe.1008.
  19. Lin, C.C. and Wang, J.F. (2012), Optimal Design and Practical Considerations of Tuned Mass Dampers for Structural Control, Chapter 6 of the book on Design Optimization of Active and Passive Structural Control Systems, (Eds., Nikos D. Lagaros, V. Plevris, and Chara C. Mitropoulou), IGI Global Publisher, USA.
  20. Lin, C.C., Lin, G.L. and Chiu, K.C. (2017), "Robust design strategy for multiple tuned mass dampers with consideration of frequency bandwidth", Int. J. Str. Stab. Dyn., 17(1), 1750002. https://doi.org/10.1142/S021945541750002X.
  21. Liu, X., Li, G., Yue, Q. and Oberlies, R. (2009), "Accelerationoriented design optimization of ice-resistant jacket platforms in the Bohai Gulf", Ocean Eng., 36(17-18), 1295-1302. https://doi.org/10.1016/j.oceaneng.2009.09.008.
  22. Lu, J., Mei, N., Li, Y. and Shi, X. (2002), "Vibration control of multi tuned mass dampers for an offshore oil platform", China Ocean Eng., 16(3), 321-328. https://doi.org/10.3321/j.issn:0890-5487.2002.03.005
  23. Lucchini, A., Greco, R., Marano, G.C. and Monti, G. (2014), "Robust design of tuned mass damper systems for seismic protection of multistory buildings", J. Struct. Eng. - ASCE, 140(8), A4014009. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000918.
  24. Moan, T. (2005), "Safety of offshore structures", CORE Report No. 2005-04; Centre for Offshore Research and Engineering, National University of Singapore, Singapore.
  25. Nagarajaiah, S. and Jung, H.J. (2014), "Smart tuned mass dampers: recent developments", Smart Struct. Syst., 13(2), 173-176. https://doi.org/10.12989/sss.2014.13.2.173.
  26. Nigdeli, S.M. and Bekdas, G. (2013), "Optimum tuned mass damper design for preventing brittle fracture of RC buildings", Smart Struct. Syst., 12(2), 137-155. https://doi.org/10.12989/sss.2013.12.2.137.
  27. Peyton, H.R. (1966), "Sea Ice Strength", Report No. UAG R-182, Geophysical Institute, University of Alaska, Alaska.
  28. Ramezani, M., Bathaei, A. and Zahrai, S.M. (2017), "Designing fuzzy systems for optimal parameters of TMDs to reduce seismic response of tall buildings", Smart Struct. Syst., 19(3), 269-277. https://doi.org/10.12989/sss.2017.19.3.269.
  29. Salvi, J. and Rizzi, E. (2016), "Closed-form optimum tuning formulas for passive Tuned Mass Dampers under benchmark excitations", Smart Struct. Syst., 17(2), 231-256. https://doi.org/10.12989/sss.2016.17.2.231.
  30. Soong, T.T. and Dargush, G.F. (1997), Passive Energy Dissipation Systems in Structural Engineering, Wiley, Buffalo.
  31. Soong, T.T. and Spencer Jr, B.F. (2002), "Supplemental energy dissipation: state-of-the-art and state-of-the practice", Eng. Struct., 24(3), 243-259. https://doi.org/10.1016/S0141-0296(01)00092-X.
  32. Spencer Jr, B.F. and Nagarajaiah, S. (2003), "State of the art of structural control", J. Struct. Eng., - ASCE, 129(7), 845-856. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(845).
  33. Taflanidis, A.A., Angelides, D.C. and Scruggs, J.T. (2009), "Simulation-based robust design of mass dampers for response mitigation of tension leg platforms", Eng. Struct., 31(4), 847-857. https://doi.org/10.1016/j.engstruct.2008.11.014.
  34. Wang, S., Li, H., Ji, C. and Jiao, G. (2002), "Energy analysis for TMD structure systems subjected to impact loading", China Ocean Eng., 16(3), 301-310. https://doi.org/10.3321/j.issn:0890-5487.2002.03.003
  35. Wang, J.F., Lin, C.C. and Lien, C.H. (2009), "Two-Stage optimum design of tuned mass dampers with consideration of stroke", Struct. Control Health Monit., 16(1), 55-72. https://doi.org/10.1002/stc.312.
  36. Wang, S., Yue, Q. and Zhang, D. (2013), "Ice-induced nonstructure vibration reduction of jacket platforms with isolation cone system", Ocean Eng., 70, 118-123. https://doi.org/10.1016/j.oceaneng.2013.05.018.
  37. Warnitchai, P. and Hoang, N. (2006), "Optimal placement and tuning of multiple tuned mass dampers for suppressing multimode structural response", Smart Struct. Syst., 2(1), 1-24. https://doi.org/10.12989/sss.2006.2.1.001.
  38. Wu, J., Chen, G. and Lou, M. (1999), "Seismic effectiveness of tuned mass dampers considering soil-structure interaction", Earthq. Eng. Struct. D., 28(11), 1219-1233. https://doi.org/10.1002/(SICI)1096-9845(199911)28:11<1219::AID-EQE861>3.0.CO;2-G
  39. Xu, Y.L., Kwok, K.C.S. and Samali, B. (1992), "Control of windinduced tall building response by tuned mass dampers", J. Wind. Eng. Ind. Aerod., 40(1), 1-32. https://doi.org/10.1016/0167-6105(92)90518-F.
  40. Yang, G. (2000), "Bohai sea ice conditions", J. Cold Reg. Eng., 14(2), 54-67. https://doi.org/10.1061/(ASCE)0887-381X(2000)14:2(54).
  41. Yue, Q. and Bi, X. (2000), "Ice-Induced jacket structure vibrations in Bohai Sea", J. Cold Reg. Eng., 14(2), 81-92. https://doi.org/10.1061/(ASCE)0887-381X(2000)14:2(81).
  42. Yue, Q., Zhang, L., Zhang, W. and Karna, T. (2009), "Mitigating ice induced jacket platform vibrations utilizing a TMD system", Cold Reg. Sci. Technol., 56(2-3), 84-89. https://doi.org/10.1016/j.coldregions.2008.11.005.
  43. Zhang, B.L., Han, Q.L. and Zhang, X.M. (2017), "Recent advances in vibration control of offshore platforms", Nonlinear Dynam., 89(2), 755-771. https://doi.org/10.1007/s11071-017-3503-4