DOI QR코드

DOI QR Code

EOS 잔골재 및 GGBFS를 혼입한 초기재령 콘크리트의 성능 평가에 관한 연구

A Study on Performance Evaluation of Early-age Concrete with EOS Fine Aggregate and GGBFS

  • 권성준 (한남대학교 건설시스템공학과) ;
  • 조성준 (한남대학교 건설시스템공학과) ;
  • 임희섭 (한남대학교 건설시스템공학과)
  • 투고 : 2019.03.21
  • 심사 : 2019.04.10
  • 발행 : 2019.07.01

초록

매립지 감소 및 천연 잔골재의 부족으로 인해 산업부산물을 콘크리트의 골재로 사용하려는 연구가 최근 들어 빠르게 진행되고 있다. 본 연구에서는 EOS 잔골재를 치환하여,OPC 콘크리트 배합과 GGBFS 배합을 대상으로 초기재령에서의 공학적 특성을 평가하였다. 실험은 EOS 잔골재를 0%, 30%, 50%로 치환, GGBFS를 0%, 40% 치환하여 물-결합재비 60% 콘크리트로 실험을 진행하였다. 굳지 않은 콘크리트에서 슬럼프, 공기량, 단위용적질량을 평가하였으며, 경화 콘크리트에서 압축강도와 NT BUILD 492 방법을 이용한 염화물 확산계수를 도출하고 EOS 골재 치환에 따른 내구성능을 평가하였다. 본 연구의 실험결과 EOS 잔골재를 치환함에 따라 재령 3일, 7일까지는 압축강도 발현이 각 기준 배합에 비해 증가함을 확인하였지만, 재령 28일에서는 일부 감소하는 것을 확인하였다. 또한 촉진 염화물 침투 실험결과, GGBFS 콘크리트 배합에서 OPC콘크리트 배합과 비교하여 약 60~67% 감소하였으며, EOS 잔골재 50% 치환 배합에서 가장 낮은 염화물 확산계수가 나타남에 따라 EOS 잔골재가 OPC 및 GGBFS 콘크리트에 사용될 수 있는 공학적 가능성을 제시하였다.

Many researches on alternative materials as construction materials is continuing by recycling industrial byproducts due to shortage of sitereclamation and natural aggregates. In this paper, engineering properties in early-aged OPC (Ordinary Portland Cement) and GGBFS (Ground Granulated Blast Furnace Slag) concrete are evaluated with EOS aggregate replacement. The related experiments were carried out with 0.6 of water to binder ratio, three levels of EOS replacement ratios (0%, 30% and 50%) for fine aggregate, and two levels of cement replacement with GGBFS (0% and 40%). Several tests such as slump air content, and unit mass measurement are performed for fresh concrete, and compressive strength and diffusion coefficient referred to NT BUILD 492 method are measured for hardened concrete. Through the tests, it was evaluated that the compressive strength in concrete with EOS aggregate increased to 3 days and 7 days but slightly decreased at the age of 28 days. In the accelerated chloride penetration test, GGBFS concrete showed reduced diffusion coefficients by 60 - 67% compared with OPC concrete. The lowest chloride diffusion coefficient was evaluated in the 50% replacement with EOS aggregate, which showed an applicability of EOS aggregate to concrete production.

키워드

참고문헌

  1. Kim, J. M., and Park, H. I. (2012), Evaluation on Volume Stability of the Electric Arc Furnace Oxidizing Slag Aggregate by Hydro Thermal Condition, Journal of Material Cycles and Waste Management, 29, 551-560.
  2. Tam, V. W. Y., Gao, X. F., and Tam, C. M. (2005), Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach, Cement and Concrete Research, 35 1195-1203. https://doi.org/10.1016/j.cemconres.2004.10.025
  3. Kwon, S.J., Lim, H.S., and Lee, H.S. (2018), Quantitative evaluation of Free CaO in electric arc furnace reduction slag using the ethylene glycol method, Journal of Korea Institute of Building Construction, 18(4), 321-327. https://doi.org/10.5345/JKIBC.2018.18.4.321
  4. Song, H. W., Kwon, S. J., Lee, S. W., and Byun, K. J. (2003), A study on resistance of chloride ion penetration in ground granulated blast-furnace slag concrete. Journal of the Korea Concrete Institute, 15(3), 400-408. https://doi.org/10.4334/JKCI.2003.15.3.400
  5. Song, H. W., and Kwon, S. J. (2009), Evaluation of chloride penetration in high performance concrete using neural network algorithm and micro pore structure. Cement and Concrete Research, 39, 814-824. https://doi.org/10.1016/j.cemconres.2009.05.013
  6. Kwon, S. J., and Park, S. G. (2013), Analysis technique for chloride penetration in high performance concrete behavior considering time-dependent accelerated chloride diffusivity, Journal of the Korea Concrete Institute, 25(2), 145-153. https://doi.org/10.4334/JKCI.2013.25.2.145
  7. Oh, K. S., Mun, J. M., and Kwon, S. J. (2016), Chloride diffusion coefficients in cold joint concrete with GGBFS, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(5), 44-49. https://doi.org/10.11112/jksmi.2016.20.5.044
  8. Faraone, N., Tonello, G., and Maschio, S. (2009), Steelmaking Slag as Aggregate for Mortars: Effects of Particle Dimension on Compression Strength, Chemophere, 77, 1152-1156. https://doi.org/10.1016/j.chemosphere.2009.08.002
  9. Lim, H. S., and Lee, H. S. (2011), Experimental Study on the Development of X-ray Shielding Concrete Utilizing Electronic Arc Furnace Oxidizing Slag, Architectural Institute of Korea, 27, 125-132.
  10. Cho, B. S., Lee, H. H., Yang, S. K., Lee, W. J., and Um, T. S. (2009), Appraisal of Concrete Performance and Plan for Stable Use of EAF Oxidizing Slag as Fine Aggregate of Concrete, Journal of the Korea Concrete Institute, 21, 367-375. https://doi.org/10.4334/JKCI.2009.21.3.367
  11. Lee, S. H., Lim, D. S., Lee, S. H., and Lee, J. H. (2013), Mechanism of Strength Development in Ultra High Strength Concrete Using the Electric Arc Furnace Oxidizing Slag as Fine Aggregate, Journal of the Korea Concrete Institute, 25(1), 3-9. https://doi.org/10.4334/JKCI.2013.25.1.003
  12. Roslan, N. H., Ismail, M., Abdul-Majid, Z., Ghoreishiamiri, S., and Muhammad, B. (2016). Performance of steel slag and steel sludge in concrete. Construction and Building Materials, 104, 16-24. https://doi.org/10.1016/j.conbuildmat.2015.12.008
  13. Sheen, Y.D., Le, D. H., and Sun, T.H. (2015), Innovative Usages of Stainless Steel Slags in Developing Self-compacting Concrete, Construction and Building Materials, 101, 268-276. https://doi.org/10.1016/j.conbuildmat.2015.10.079
  14. Lim, H. S., and Lee, H. S. (2017), Study on performance evaluation of concrete using electric arc furnace oxidizing slag aggregate, Korea Institute for Structural Maintenance and Inspection, 21(4), 97-103.
  15. Chun, J. H., Ryu, H. S., Yoon, Y. S., and Kwon, S. J. (2017), Crack and time effect on chloride diffusion coefficient in nuclear power plant concrete with 1 year curing period, Journal of the Korea Institute for Structural Maintenance and Inspection, 21(6), 83-90. https://doi.org/10.11112/jksmi.2017.21.6.083
  16. Yoo, J. G. (2010), Durability Design of Concrete and Evaluation of Field Application on Reinforced Concrete Structure Exposed to Marine Environment, Ph.D. dissertation, Daejeon, Chungnam University, Department of Architectural Engineering.
  17. Tang, L., and Nilsson, L.O. (1992), Rapid Determination of the Chloride Diffusivity in Concrete by Applying an Electrical Field, ACI Materials Journal, 89(1), 49-53.
  18. Tang, L. (1996), Electrically Accelerated Methods for Determining Chloride Diffusivity in Concrete-Current Development, Magazine of Concrete Research, 48(176), 173-179. https://doi.org/10.1680/macr.1996.48.176.173
  19. NT BUILD 492. (1999) Chloride Migration Coefficient from Non-Steady-State Migration Experiments, Denmark, Slettetoften: NORDTEST. 1-11.
  20. Song, H. W., Kwon, S. J., Byun, K. J., and Park, C. K. (2005), A Study on Analytical Technique of Chloride Diffusion Considering Characteristics of Mixture Design for High Performance Concrete using Mineral Admixture, Journal of the Korean Society of Civil Engineers, 25(1A), 213-223.
  21. Yoon, Y. S., and Kwon, S. J. (2018), Evaluation of time-dependent chloride resistance in HPC containing fly ash cured for 1 year, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(4), 52-59. https://doi.org/10.11112/JKSMI.2018.22.4.052
  22. Lee, S. S., Won, C., Kim, D.S., and Park, S. J. (2000), A study on the engineering properties of concrete using blast-furnace slag powder, Journal of the Korea Concrete Institute, 12(4), 49-58. https://doi.org/10.22636/JKCI.2000.12.4.49
  23. Lee, M. H., Lee, S. H., and Shim, J. W. (2005), A study on the properties of recycled concrete using recycled fine aggregates with different removal formulas of powder in aggregate, Journal of the Korea Concrete Institute, 17(1), 95-104. https://doi.org/10.4334/JKCI.2005.17.1.095