DOI QR코드

DOI QR Code

Enhancement of fluid flow performance through deep fractured rocks in an insitu leaching potential mine site using discrete fracture network (DFN)

  • Yao, Wen-li (Key Laboratory of Deep Coal Resource Mining, Ministry of Education, School of Mines, China University of Mining and Technology) ;
  • Mostafa, Sharifzadeh (Department of Mining and Metallurgical Engineering, Western Australian School Mines, Curtin University) ;
  • Ericson, Ericson (Faculty of Science and Engineering, Department of Mining and Metallurgical Engineering, Western Australian School Mines, Curtin University) ;
  • Yang, Zhen (Key Laboratory of Deep Coal Resource Mining, Ministry of Education, School of Mines, China University of Mining and Technology) ;
  • Xu, Guang (Department of Mining Engineering, Missouri University of Science and Technology) ;
  • Aldrich, Chris (Department of Mining and Metallurgical Engineering, Western Australian School Mines, Curtin University)
  • 투고 : 2019.07.03
  • 심사 : 2019.08.10
  • 발행 : 2019.08.30

초록

In-situ leaching could be one of the promising mining methods to extract the minerals from deep fractured rock mass. Constrained by the low permeability at depth, however, the performance does not meet the expectation. In fact, the rock mass permeability mainly depends on the pre-existing natural fractures and therefore play a crucial role in in-situ leaching performance. More importantly, fractures have various characteristics, such as aperture, persistence, and density, which have diverse contributions to the promising method. Hence, it is necessary to study the variation of fluid rate versus fracture parameters to enhance in-situ leaching performance. Firstly, the subsurface fractures from the depth of 1500m to 2500m were mapped using the discrete fracture network (DFN) in this paper, and then the numerical model was calibrated at a particular case. On this basis, the fluid flow through fractured rock mass with various fracture characteristics was analyzed. The simulation results showed that with the increase of Fisher' K value, which determine the fracture orientation, the flow rate firstly decreased and then increased. Subsequently, as another critical factor affecting the fluid flow in natural fractures, the fracture transmissivity has a direct relationship with the flow rate. Sensitive study shows that natural fracture characteristics play a critical role in in-situ leaching performance.

키워드

과제정보

연구 과제 주관 기관 : Central Universities

참고문헌

  1. AbuAisha, M., Eaton, D., Priest, J., Wong, R., Loret, B. and Kent, A.H. (2019), "Fully coupled hydro-mechanical controls on nondiffusive seismicity triggering front driven by hydraulic fracturing", J. Seismol., 23(1), 109-121. https://doi.org/10.1007/s10950-018-9795-0
  2. Benes, V., Boitsov, A., Fuzlullin, M., Hunter, J., Mays, W., Novak, J., Slezak, J., Stover, D., Tweeton, D. and Underhill, D. (2001), Manual of Acid in situ Leach Uranium Mining Technology, International Atomic Energy Agency, Vienna, Austria.
  3. De Silva, V.R.S., Ranjith, P.G., Perera, M.S.A., Wu, B. and Wanniarachchi, W.A.M. (2018), "A low energy rock fragmentation technique for in-situ leaching", J. Clean. Prod., 204, 586-606. https://doi.org/10.1016/j.jclepro.2018.08.296.
  4. Dershowitz, W.S., La-Pointe, P.R., and Doe, T.W., (2000), "Advances in discrete fracture network modeling", Proceeding of the U.S. EPA/NGWA Fractured Rock Conference, Portland, Oregon, U.S.A.
  5. Dippenaar, M.A., and Van Rooy, J.L., (2016), "On the cubic law and variably saturated flow through discrete open rough-walled discontinuities", Int. J. Rock Mech. Min. Sci., 89, 200-211. https://doi.org/10.1016/j.ijrmms.2016.09.011
  6. Dong, J.N., Chen, M., Jin, Y., Hong, G.B., Zaman, M. and Li, Y.W. (2019), "Study on micro-scale properties of cohesive zone in shale", Int. J. Solids Struct., 163, 178-193. https://doi.org/10.1016/j.ijsolstr.2019.01.004
  7. Easton, A.J. (2004), "Discrete fracture simulation of well capture zones in bedrock", M.Sc. Thesis, Queen's University at Kingston, Canada.
  8. Einstein, H.H. and Baecher, G.B. (1983), "Probabilistic and statistical methods in engineering geology", Rock Mech. Rock Eng., 16(1), 39-72. https://doi 0723-2632/83/0016/0039/$ 06.80. https://doi.org/10.1007/BF01030217
  9. Ghaderi, A., Taheri-Shakib, J. and Nik, M.A.S. (2018), "The distinct element method (DEM) and the extended finite element method (XFEM) application for analysis of interaction between hydraulic and natural fractures", J. Petrol. Sci. Eng., 171, 422-430. https://doi.org/10.1016/j.petrol.2018.06.083.
  10. Haque, N. and Norgate, T. (2014), "The greenhouse gas footprint of in-situ leaching of uranium, gold and copper in Australia", J. Clean. Prod., 84, 382-390. https://doi.org/10.1016/j.jclepro.2013.09.033.
  11. Hu, C., Chen, H.L., Chen, G. and Liu, J.H. (2019), "Detection of low-efficiency zones of water curtain system for underground LPG storage by a discrete fracture network model", Environ. Earth Sci., 78(1), 11. https://doi.org/10.1007/s12665-018-8006-1
  12. Hu, G.Z., Sun, C., Sun, M.F., Qin, W. and Linghu, J.S. (2018), "The case for enhanced coalbed methane using hydraulic fracturing in the geostructural belt", Energy Explor. Exploit., 36(6), 1629-1644. https://doi.org/10.1177/0144598718770697
  13. Hyman, J.D., Aldrich, G., Viswanathan, H., Makedonska, N. and Karra, S. (2016), "Fracture size and transmissivity correlations: Implications for transport simulations in sparse threedimensional discrete fracture networks following a truncated power law distribution of fracture size", Water Resour. Res., 52(8), 6472-6489. https://doi.org/10.1002/2016WR018806.
  14. Kamali B.A., Shahriar, K., Sharifzadeh, M. and Marefvand, P. (2018), "Validation of 3D discrete fracture network model focusing on areal sampling methods-a case study on the powerhouse cavern of rudbar lorestan pumped storage power plant, Iran", Geomech. Eng., 16(1), 21-34. https://doi.org/10.12989/gae.2018.16.1.021.
  15. Kamali B.A., Shahriar, K., Sharifzadeh, M. and Marefvand, P. (2019), "Comparison of methods for calculating geometrical characteristics of discontinuities in a cavern of the Rudbar Lorestan power plant", Bull. Eng. Geol. Environ., 78(2), 1073-1093. https://doi.org/10.1007/s10064-017-1145-x.
  16. Karimzade, E., Sharifzadeh, M., Zarei, H.R., Shahriar, K. and Seifabad, M.C. (2017), "Prediction of water inflow into underground excavations in fractured rocks using a 3D discrete fracture network (DFN) model", Arab. J. Geosci., 10(9), 1-14. https://doi.org/10.1007/s12517-017-2987-z.
  17. Kozikhin, R.A., Daminov, A.M., Fattakhov, I.G., Kuleshova, L.S. and Gabbasov, A.K. (2018), "Identifying the efficiency factors on the basis of evaluation of acidizing of carbonate reservoirs", IOP Conf. Ser. Earth Environ. Sci., 194(6), 062013-062018. https://doi:10.1088/1755-1315/194/6/062013.
  18. Kuhar, L.L., Breuer, P.L., Haque, N. and Robinson, D.J. (2018), "Considerations and potential economic advantages for the insitu recovery of gold from deep, hard-rock deposits", Miner. Eng., 121, 14-22. https://doi.org/10.1016/j.mineng.2018.02.026
  19. Li, Y.Y., Shang, Y.J. and Yang, P. (2018), "Modeling fracture connectivity in naturally fractured reservoirs: A case study in the Yanchang Formation, Ordos Basin, China", Fuel, 211, 789-796. https://doi.org/10.1016/j.fuel.2017.09.109.
  20. Liu, J., Wang, J.G., Leung, C.F. and Gao, F., (2018), "A fully coupled numerical model for microwave heating enhanced shale gas recovery", Energies, 11(6), 1-28. https://doi.org/10.3390/en11061608
  21. Martens, E., Zhang, H.G., Prommer, H.N., Greskowiak, J., Jeffrey, M. and Roberts, P. (2012), "In situ recovery of gold: Column leaching experiments and reactive transport modeling", Hydrometallurgy, 125, 16-23. https://doi.org/10.1016/j.hydromet.2012.05.005
  22. Medici, G., West, L.J. and Banwart, S.A. (2019), "Groundwater flow velocities in a fractured carbonate aquifer-type: Implications for contaminant transport", J. Contamin. Hydrol., 222, 1-16. https://doi.org/10.1016/j.jconhyd.2019.02.001
  23. Palleske, C. (2014), "A study of biases, assumptions and practical considerations for the use of discrete fracture networks in geomechanical practice", M.Sc. Thesis, Queen's University, Kingston, Canada.
  24. Petersen J. (2016), "Heap leaching as a key technology for recovery of values from low-grade ores-A brief overview", Hydrometallurgy, 165, 206-212. https://doi.org/10.1016/j.hydromet.2015.09.001
  25. Pokalai, K., Kulikowski, D., Johnson, R.L., Haghighi, M. and Cooke, D. (2016), "Development of a new approach for hydraulic fracturing in tight sand with pre-existing natural fractures", APPEA J., 56(1), 225-238. https://doi.org/10.1071/AJ15017.
  26. Renshaw, C.E. (1995), "On the relationship between mechanical and hydraulic apertures in rough-walled fractures", J. Geophys. Res. Solid Earth, 100(B12), 24629-24636. https://doi.org/10.1029/95JB02159.
  27. Rocha, A.C., Murad, M.A. and Le, T.D. (2017), "A new model for flow in shale-gas reservoirs including natural and hydraulic fractures", Comput. Geosci., 21(5-6), 1095-1117. https://doi 10.1007/s10596-017-9665-9.
  28. Saini-Eidukat, B., Maroza, D., Blake, R. and Adamson, N. (1993), "Implications of rock mineralogy and texture on the feasibility of in situ leach mining of Mn-bearing iron formations of central Minnesota, USA", Appl. Geochem., 8(1), 37-49. https://doi.org/10.1016/0883-2927(93)90055-L.
  29. Seredkin, M., Zabolotsky, A. and Jeffress, G. (2016), "In situ recovery, an alternative to conventional methods of mining: Exploration, resource estimation, environmental issues, project evaluation and economics", Ore Geol. Rev., 79, 500-514. https://doi.org/10.1016/j.oregeorev.2016.06.016.
  30. Sharifzadeh, M., Aldrich, C., Ericson, E. and Sarmadivaleh, M., (2018), "A methodology for geomechanical modelling of in situ recovery (ISR) in fractured hard rocks", Proceedings of the ISRM 10th Asian Rock Mechanics Symposium, Singapore, October-November
  31. Sharifzadeh, M. and Javadi, M. (2017), Groundwater and Underground Excavations: From Theory to Practice, in Rock Mechanics and Engineering, CRC Press, Taylor and Francis Group, London, U.K.
  32. Sinclair, L. and Thompson, J. (2015), "In situ leaching of copper: Challenges and future prospects", Hydrometallurgy, 157, 306-324. https://doi.org/10.1016/j.hydromet.2015.08.022
  33. Taylor, G., Farrington, V., Woods, P., Ring, R. and Molloy, R. (2004), "Review of environmental impacts of the acid in-situ leach uranium mining process", CSIRO Land and Water Client Report, CSIRO Clayton, Victoria, Australia.

피인용 문헌

  1. Numerical simulation and optimization of hydraulic fracturing operation in a sandstone-mudstone interbedded reservoir vol.14, pp.21, 2021, https://doi.org/10.1007/s12517-021-08506-0