References
- Holand W, Rheinberger V, Apel E, Ritzberger C, Rothbrust F, Kappert H, Krumeich F, Nesper R. Future perspectives of biomaterials for dental restoration. J European Ceram Soc 2009;29:1291-7. https://doi.org/10.1016/j.jeurceramsoc.2008.08.023
- Bayne SC, Ferracane JL, Marshall GW, Marshall SJ, van Noort R. The evolution of dental materials over the past century: Silver and gold to tooth color and beyond. J Dent Res 2019;98:257-65. https://doi.org/10.1177/0022034518822808
- de Kok P, Pereira GKR, Fraga S, de Jager N, Venturini AB, Kleverlaan CJ. The effect of internal roughness and bonding on the fracture resistance and structural reliability of lithium disilicate ceramic. Dent Mater 2017;33:1416-25. https://doi.org/10.1016/j.dental.2017.09.018
- Dalkiz M, Sipahi C, Beydemir B. Effects of six surface treatment methods on the surface roughness of a low-fusing and an ultra low-fusing feldspathic ceramic material. J Prosthodont 2009;18:217-22. https://doi.org/10.1111/j.1532-849X.2008.00410.x
- Kelly JR, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J 2011;56:84-96. https://doi.org/10.1111/j.1834-7819.2010.01299.x
- Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials. 12th ed. St. Louis; Elsevier/Saunders; 2012. p. 418-73.
- Wright MD, Masri R, Driscoll CF, Romberg E, Thompson GA, Runyan DA. Comparison of three systems for the polishing of an ultra-low fusing dental porcelain. J Prosthet Dent 2004;92:486-90. https://doi.org/10.1016/j.prosdent.2004.07.021
- Chang CW, Waddell JN, Lyons KM, Swain MV. Cracking of porcelain surfaces arising from abrasive grinding with a dental air turbine. J Prosthodont 2011;20:613-20. https://doi.org/10.1111/j.1532-849X.2011.00760.x
- al-Wahadni A, Martin DM. Glazing and finishing dental porcelain: a literature review. J Can Dent Assoc 1998;64:580-3.
- Rashid H. The effect of surface roughness on ceramics used in dentistry: A review of literature. Eur J Dent 2014;8:571-9. https://doi.org/10.4103/1305-7456.143646
- Yilmaz C, Korkmaz T, Demirkoprulu H, Ergun G, Ozkan Y. Color stability of glazed and polished dental porcelains. J Prosthodont 2008;17:20-4. https://doi.org/10.1111/j.1532-849X.2007.00237.x
- Vichi A, Fonzar RF, Goracci C, Carrabba M, Ferrari M. Effect of finishing and polishing on roughness and gloss of lithium disilicate and lithium silicate zirconia reinforced glass ceramic for CAD/CAM systems. Oper Dent 2018;43:90-100. https://doi.org/10.2341/16-381-L
- Yuzugullu B, Celik C, Erkut S, Ozcelik TB. The effects of extraoral porcelain polishing sequences on surface roughness and color of feldspathic porcelain. Int J Prosthodont 2009;22:472-5.
- Sarikaya I, Guler AU. Effects of different polishing techniques on the surface roughness of dental porcelains. J Appl Oral Sci 2010;18:10-6. https://doi.org/10.1590/S1678-77572010000100004
- Al-Shammery HA, Bubb NL, Youngson CC, Fasbinder DJ, Wood DJ. The use of confocal microscopy to assess surface roughness of two milled CAD-CAM ceramics following two polishing techniques. Dent Mater 2007;23:736-41. https://doi.org/10.1016/j.dental.2006.06.012
- Mohammadibassir M, Rezvani MB, Golzari H, Moravej Salehi E, Fahimi MA, Kharazi Fard MJ. Effect of two polishing systems on surface roughness, topography, and flexural strength of a monolithic lithium disilicate ceramic. J Prosthodont 2019;28:e172-80. https://doi.org/10.1111/jopr.12586
- Turgut S, Bagis B. Colour stability of laminate veneers: an in vitro study. J Dent 2011;39:e57-64. https://doi.org/10.1016/j.jdent.2011.11.006
- Lee YK, Yu B, Lim JI, Lim HN. Perceived color shift of a shade guide according to the change of illuminant. J Prosthet Dent 2011;105:91-9. https://doi.org/10.1016/S0022-3913(11)60006-1
- Kelly JR. Ceramics in restorative and prosthetic dentistry. Annual Rev Mater Sci 1997;27:443-68. https://doi.org/10.1146/annurev.matsci.27.1.443
- Sarikaya I, Guler AU. Effects of different surface treatments on the color stability of various dental porcelains. J Dent Sci 2011;6:65-71. https://doi.org/10.1016/j.jds.2011.03.001
- Motro PF, Kursoglu P, Kazazoglu E. Effects of different surface treatments on stainability of ceramics. J Prosthet Dent 2012;108:231-7. https://doi.org/10.1016/S0022-3913(12)60168-1
- Kursoglu P, Karagoz Motro PF, Kazazoglu E. Correlation of surface texture with the stainability of ceramics. J Prosthet Dent 2014;112:306-13. https://doi.org/10.1016/j.prosdent.2013.09.028
- Sarikaya I, Yerliyurt K, Hayran Y. Effect of surface finishing on the colour stability and translucency of dental ceramics. BMC Oral Health 2018;18:40. https://doi.org/10.1186/s12903-018-0508-4
- Sarac D, Sarac YS, Yuzbasioglu E, Bal S. The effects of porcelain polishing systems on the color and surface texture of feldspathic porcelain. J Prosthet Dent 2006;96:122-8. https://doi.org/10.1016/j.prosdent.2006.05.009
- Camacho GB, Vinha D, Panzeri H, Nonaka T, Goncalves M. Surface roughness of a dental ceramic after polishing with different vehicles and diamond pastes. Braz Dent J 2006;17:191-4. https://doi.org/10.1590/S0103-64402006000300003
- Sarac D, Turk T, Elekdag-Turk S, Sarac YS. Comparison of 3 polishing techniques for 2 all-ceramic materials. Int J Prosthodont 2007;20:465-8.
- Boaventura JM, Nishida R, Elossais AA, Lima DM, Reis JM, Campos EA, de Andrade MF. Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic. Acta Odontol Scand 2013;71:438-43. https://doi.org/10.3109/00016357.2012.690570
- Carrabba M, Vichi A, Vultaggio G, Pallari S, Paravina R, Ferrari M. Effect of finishing and polishing on the surface roughness and gloss of feldspathic ceramic for chairside CAD/CAM systems. Oper Dent 2017;42:175-84. https://doi.org/10.2341/15-174-L
- Ertan AA, Sahin E. Colour stability of low fusing porcelains: an in vitro study. J Oral Rehabil 2005;32:358-61. https://doi.org/10.1111/j.1365-2842.2004.01415.x
- Samra AP, Pereira SK, Delgado LC, Borges CP. Color stability evaluation of aesthetic restorative materials. Braz Oral Res 2008;22:205-10. https://doi.org/10.1590/S1806-83242008000300003
- Niu E, Agustin M, Douglas RD. Color match of machinable lithium disilicate ceramics: effects of foundation restoration. J Prosthet Dent 2013;110:501-9. https://doi.org/10.1016/j.prosdent.2013.09.004
- Akar GC, Pekkan G, Cal E, Eskitascioglu G, Ozcan M. Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systems. J Prosthet Dent 2014;112:314-21. https://doi.org/10.1016/j.prosdent.2013.09.033
- Niu E, Agustin M, Douglas RD. Color match of machinable lithium disilicate ceramics: Effects of cement color and thickness. J Prosthet Dent 2014;111:42-50. https://doi.org/10.1016/j.prosdent.2013.09.005
- Alp G, Subasi MG, Johnston WM, Yilmaz B. Effect of surface treatments and coffee thermocycling on the color and translucency of CAD-CAM monolithic glass-ceramic. J Prosthet Dent 2018;120:263-8. https://doi.org/10.1016/j.prosdent.2017.10.024
- Atay A, Karayazgan B, Ozkan Y, Akyil MS. Effect of colored beverages on the color stability of feldspathic porcelain subjected to various surface treatments. Quintessence Int 2009;40:e41-8.
- Sagsoz O, Demirci T, Demirci G, Sagsoz NP, Yildiz M. The effects of different polishing techniques on the staining resistance of CAD/CAM resin-ceramics. J Adv Prosthodont 2016;8:417-22. https://doi.org/10.4047/jap.2016.8.6.417
- Guler AU, Yilmaz F, Kulunk T, Guler E, Kurt S. Effects of different drinks on stainability of resin composite provisional restorative materials. J Prosthet Dent 2005;94:118-24. https://doi.org/10.1016/j.prosdent.2005.05.004
- Raimondo RL Jr, Richardson JT, Wiedner B. Polished versus autoglazed dental porcelain. J Prosthet Dent 1990;64:553-7. https://doi.org/10.1016/0022-3913(90)90126-W
- Patterson CJ, McLundie AC, Stirrups DR, Taylor WG. Efficacy of a porcelain refinishing system in restoring surface finish after grinding with fine and extra-fine diamond burs. J Prosthet Dent 1992;68:402-6. https://doi.org/10.1016/0022-3913(92)90400-5
- Goldstein GR, Barnhard BR, Penugonda B. Profilometer, SEM, and visual assessment of porcelain polishing methods. J Prosthet Dent 1991;65:627-34. https://doi.org/10.1016/0022-3913(91)90196-4
- Manjuran NG, Sreelal T. An in vitro study to identify a ceramic polishing protocol effecting smoothness superior to glazed surface. J Indian Prosthodont Soc 2014;14:219-27. https://doi.org/10.1007/s13191-013-0313-3
- Steiner R, Beier US, Heiss-Kisielewsky I, Engelmeier R, Dumfahrt H, Dhima M. Adjusting dental ceramics: An in vitro evaluation of the ability of various ceramic polishing kits to mimic glazed dental ceramic surface. J Prosthet Dent 2015; 113:616-22. https://doi.org/10.1016/j.prosdent.2014.12.007
- Fuzzi M, Zaccheroni Z, Vallania G. Scanning electron microscopy and profilometer evaluation of glazed and polished dental porcelain. Int J Prosthodont 1996;9:452-8.
- Bottino MC, Valandro LF, Kantorski KZ, Bressiani JC, Bottino MA. Polishing methods of an alumina-reinforced feldspar ceramic. Braz Dent J 2006;17:285-9. https://doi.org/10.1590/S0103-64402006000400004
- Seghi RR, Hewlett ER, Kim J. Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain. J Dent Res 1989;68:1760-4. https://doi.org/10.1177/00220345890680120801
- Gupta R, Parkash H, Shah N, Jain V. A spectrophotometric evaluation of color changes of various tooth colored veneering materials after exposure to commonly consumed beverages. J Indian Prosthodont Soc 2005;5:72-8. https://doi.org/10.4103/0972-4052.16873
- Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002;88:10-5. https://doi.org/10.1067/mpr.2002.126795
Cited by
- Effect of different surface treatments on optical, colorimetric, and surface characteristics of a lithium disilicate glass-ceramic vol.33, pp.7, 2019, https://doi.org/10.1111/jerd.12793
- Effects of surface treatments and abutment shades on the final color of high-translucency self-glazed zirconia crowns vol.126, pp.6, 2019, https://doi.org/10.1016/j.prosdent.2021.09.010