Structural Engineering and Mechanics

  • 제71권4호
  • /
  • Pages.417-432
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic performance analysis of steel-brace RC frame using topology optimization

  • Qiao, Shengfang (Guangzhou Institute of Building Science Co., Ltd.) ;
  • Liang, Huqing (Guangzhou Municipal Construction Group Co., Ltd.) ;
  • Tang, Mengxiong (Guangzhou Institute of Building Science Co., Ltd.) ;
  • Wang, Wanying (School of Civil Engineering and Transportation, Guangdong University of Technology) ;
  • Hu, Hesong (Guangzhou Institute of Building Science Co., Ltd.)
  • 투고 : 2018.11.09
  • 심사 : 2019.04.10
  • 발행 : 2019.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Seismic performance analysis of steel-brace reinforced concrete (RC) frame using topology optimization in highly seismic region was discussed in this research. Topology optimization based on truss-like material model was used, which was to minimum volume in full-stress method. Optimized bracing systems of low-rise, mid-rise and high-rise RC frames were established, and optimized bracing systems of substructure were also gained under different constraint conditions. Thereafter, different structure models based on optimized bracing systems were proposed and applied. Last, structural strength, structural stiffness, structural ductility, collapse resistant capacity, collapse probability and demolition probability were studied. Moreover, the brace buckling was discussed. The results show that bracing system of RC frame could be derived using topology optimization, and bracing system based on truss-like model could help to resolve numerical instabilities. Bracing system of topology optimization was more effective to enhance structural stiffness and strength, especially in mid-rise and high-rise frames. Moreover, bracing system of topology optimization contributes to increase collapse resistant capacity, as well as reduces collapse probability and accumulated demolition probability. However, brace buckling might weaken beneficial effects.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of China, Foundation of Zhuhai Da Hengqin Co. Ltd, China railway 20 bureau group Co. Ltd.

참고문헌

  1. Allahdadian, S. and Boroomand, B. (2016), "Topology optimization of planar frames under seismic loads induced by actual and artificial earthquake records", Eng. Struct., 115(3), 140-154. https://doi.org/10.1016/j.engstruct.2016.02.022.
  2. Akbari, R., Aboutalebi, M.H. and Maheri, M.R. (2015), "Seismic fragility assessment of steel x-braced and chevron-braced RC frames", Asian J. Civil Eng.16(1), 13-27.
  3. ASCE/SEI 41-13 (2013), Seismic Evaluation and Retrofit Rehabilitation of Existing Building, American Society of Civil Engineers; USA.
  4. Della, C.G., D'Aniello, M. and Landolfo, R. (2015), "Field testing of all-steel buckling-restrained braces applied to a damaged reinforced concrete building", J. Struct. Eng., 141. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001080.
  5. Duong, K.V., Sheikh, S. and Vecchio, F.J. (2007), "Seismic Behavior of Shear-Critical Reinforced Concrete Frame: Experimental Investigation", ACI Struct. J., 140(3), 304-313.
  6. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, USA.
  7. GB50009 (2012), Load Code for the Design of Building Structures, Architecture Industry Press, Beijing, China.
  8. GB50011 (2016), Code for Seismic Design of Buildings, Architecture Industry Press, Beijing, China.
  9. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  10. Opensees. Open system for earthquake engineering simulation. (2013), Berkeley, CA: Pacific Earthquake Engineering Research Center, University of California. http://opensees.-berkeley.edu.
  11. Ozcelik, R., Binici, B. and Kurc, O. (2012), "Pseudo dynamic testing of an RC frame retrofitted with chevron braces", J. Earthq. Eng., 16(4), 515-539. https://doi.org/10.1080/13632469.2011.653297.
  12. Papadrakakis, M. (1983), "Inelastic post-buckling analysis of trusses", J. Struct. Eng. 109(9), 2129-2147. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:9(2129).
  13. Qiao, S.F., Han, X.L., Zhou, K.M. and Ji, J. (2016), "Seismic analysis of steel structure with brace configuration using topology optimization", Steel Compos. Struct., 21(3), 501-515. https://doi.org/10.12989/scs.2016.21.3.501
  14. Qiao, S.F., Han, X.L., Zhou, K.M. and Li, W.C. (2017), "Conceptual configuration and seismic performance of high-rise steel braced frame", Steel Compos. Struct., 23(2), 173-186. https://doi.org/10.12989/scs.2017.23.2.173.
  15. Qiao, S.F. and Zhou, K.M. (2016), "Structural topology optimization under uncertain load based on truss-like material model", Eng. Mech., 33(3), 252-256.
  16. Ramirez, C.M. and Miranda, E. (2012), "Significance of residual drifts in building earthquake loss estimation", Earthq. Eng. Struct. Dynam., 41(11), 1477-1493. https://doi.org/10.1002/eqe.2217.
  17. Suksuwan, A. and Spence, S. (2018), "Performance-based multi-hazard topology optimization of wind and seismically excited structural systems", Eng. Struct., 172, 573-588. https://doi.org/10.1016/j.engstruct.2018.06.039.
  18. Tangaramvong, S. and Tin-Loi, F. (2015), "Optimal performance-based rehabilitation of steel frames using braces", J. Struct. Eng., 141(10), 1-10(04015015). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001248.
  19. Tanaka, H. and Park, R. (1990), "Effect of Lateral Confining reinforcement on the ductile behavior of reinforced concrete columns", Ph.D. Disseration, University of Canterbury. http://hdl.handle.net/10092/1241.
  20. Vamvatsikos, D. and Cornell, C. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dynam., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  21. Zhang, X.J., Maheshwari, S., Ramos, A.S. and Paulino, G.H. (2016), "Macroelement and macropatch approaches to structural topology optimization using the ground structure method", J. Struct. Eng., 142(11), 1-14(04016090). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001524.
  22. Zhou, K.M. and Li, X. (2005), "Topology optimization of Structures under multiple load cases using a fiber-reinforced composite material model", Comput. Mech., 38(5), 163-170. https://doi.org/10.1007/s00466-005-0735-9.
  23. Zhu, M., Yang, Yang., Guest, J.K., Shields, M.D. (2017), "Topology optimization for linear stationary stochastic dynamics: applications to frame structures", Struct. Safety, 67, 116-131. https://doi.org/10.1016/j.strusafe.2017.04.004.