DOI QR코드

DOI QR Code

Behaviours of steel-fibre-reinforced ULCC slabs subject to concentrated loading

  • Wang, Jun-Yan (Key Laboratory of Advanced Civil Engineering Materials, Tongji University, Ministry of Education) ;
  • Gao, Xiao-Long (Key Laboratory of Advanced Civil Engineering Materials, Tongji University, Ministry of Education) ;
  • Yan, Jia-Bao (School of Civil Engineering, Tianjin University)
  • Received : 2018.09.15
  • Accepted : 2019.04.10
  • Published : 2019.08.25

Abstract

Novel steel fibre reinforced ultra-lightweight cement composite (ULCC) with compressive strength of 87.3MPa and density of $1649kg/m^3$ was developed for the flat slabs in civil buildings. This paper investigated structural behaviours of ULCC flat slabs according to a 4-specimen test program under concentrated loading and some reported test results. The investigated governing parameters on the structural behaviours of the ULCC slabs include volume fraction of the steel fibre and the patch loading area. The test results revealed that ULCC flat slabs with and without flexure reinforcement failed in different failure mode, and an increase in volume fraction of the steel fibre and loading area led to an increase in flexural resistance for the ULCC slabs without flexural reinforcement. Based on the experiment results, the analytical models were developed and also validated. The validations showed that the analytical models developed in this paper could predict the ultimate strength of the ULCC flat slabs with and without flexure reinforcement reasonably well.

Keywords

Acknowledgement

Supported by : National Nature Science Foundation of China, Central Universities

References

  1. Alexander, S.D.B. and Simmonds, S.H. (1987), "Ultimate strength of slab column connections", ACI Struct. J., 84(3), 255-261.
  2. American Concrete Institute 318-14 (ACI) (2014), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, Farmington Hills (MI), American Concrete Institute; USA.
  3. ASTM C39/C39M-14 (2014), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International; West Conshohocken, PA, USA.
  4. ASTM A370-13 (2013), Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM International, West Conshohocken, PA, USA.
  5. Chia, K.S., Zhang, M.H. and Liew, J.Y.R. (2011), "High-strength ultra-lightweight cement composite-material properties", 9th International Symposium on High Performance Concrete-Design, Verification and Utilizaiton, Rotorua, New Zealand, August.
  6. Delahay, P.E.J. and Christopher, P.E.B. (2007), "Current trends in economical concrete construction, Part one: Floor framing and lateral systems", Struct. Mag., 7, 19-21.
  7. Eurocode 2 (2004), Design of concrete structures - Part 1-1: General Rules and Rules for Buildings, BS-EN-1992-1-1, European committee for Standardization; Brussels, Belgium.
  8. Gardner, N.J., Huh, J. and Chung, L. (2002), "Lessons from the Sampoong department store collapse", Cement Concrete Compos., 24(6), 23-29. https://doi.org/10.1016/S0958-9465(01)00068-3.
  9. Kankam, C.K. and Odum, E.B. (2006), "Babadua reinforced concrete two-way slabs subjected to concentrated loading", Construction and Building Materials, 20(5), 279-285. https://doi.org/10.1016/j.conbuildmat.2005.01.021
  10. Liu, X.M., Chia, K.S., Zhang, M.H. and Liew, J.Y.R. (2012), "Water and chloride ion penetration resistance of high-strength ultra lightweight cement composite", 1st International Congress on Durability of Concrete (ICDC), Trondheim, Norway, 18-21, June.
  11. Rankin, G.I.B. and Long, A.E. (2015), "Predicting the punching strength of conventional slab-column specimens", Proceedings of the Institution of Civil Engineers Part Design & Construction, 82(2), 327-346. https://doi.org/10.1680/iicep.1987.382
  12. Sohel, K.M.A., Liew, J.Y.R. and Zhang, M.H. (2011), "Analysis and design of steel-concrete composite sandwich systems subjected to extreme loads", Frontiers of Architecture and Civil Engineering in China September, 5(3), 278-293. https://doi.org/10.1007/s11709-011-0120-z.
  13. Sohel, K.M.A., Liew, J.Y.R., Zhang, M.H., Yan, J.B. and Chia, K.S. (2013), "Investigation of longitudinal shear resistance of steel-ultra-lightweight cementitious composite slabs with profiled sheeting", 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, Singapore, 2-4. July.
  14. Schousboe, I. (1976), "Bailey's crossroads collapse reviewed", J. Eng. Mech. Division, 102(2), 365-378.
  15. Theodorakopoulos, D.D. and Swamy, R.N. (2002), "Ultimate punching shear strength analysis of slab column connections", Cement Concrete Compos., 24(6), 509-521. https://doi.org/10.1016/S0958-9465(01)00067-1.
  16. Wang, J.Y., Chia, K.S., Liew, J.Y.R. and Zhang, M.H. (2013), "Flexural performance of fibre reinforced ultra lightweight cement composites with low fibre content", Cement Concrete Compos., 43, 39-47. https://doi.org/10.1016/j.cemconcomp.2013.06.006.
  17. Wang, J.Y., Yang, Y., Liew, J.Y.R. and Zhang, M.H. (2014), "Method to determine mixture proportions of workable ultra lightweight cement composites to achieve target unit weights", Cement Concrete Compos., 53, 178-186. https://doi.org/10.1016/j.cemconcomp.2014.07.006.
  18. Wang, J.Y., Gao, X.L. and Yan, J.B. (2018), "Developments and mechanical behaviors of steel fiber reinforced ultra-lightweight cement composite with different densities", Construct. Build. Mater., 171, 643-653. https://doi.org/10.1016/j.conbuildmat.2018.03.168.
  19. Ward, P. (2010), "SFRC suspended slabs in flexure", Struct. Eng., 88, 16-19.
  20. Yan, J.B., Liew, J.Y.R., Zhang, M.H. and Wang, J.Y. (2014), "Ultimate strength behaviour of steel-concrete-steel sandwich composite structures, Part 1: Experimental and analytical study", Steel Compos. Struct., 17(6), 907-927. https://doi.org/10.1617/s11527-014-0252-4.
  21. Yan, J.B., Liew, J.Y.R., Zhang, M.H. and Sohel, K.M.A. (2015), "Experimental and analytical study on ultimate strength behaviour of steel-concrete-steel sandwich composite beam structures", Mater. Struct., 48, 1523-1544. https://doi.org/10.1617/s11527-014-0252-4.
  22. Yan, J.B., Wang, J.Y., Liew, J.Y.R., Qian, X.D. and Zhang, W. (2016), "Reinforced ultra-lightweight cement composite flat slabs: Experiments and analysis", Mater. Design, 95, 148-158. https://doi.org/10.1016/j.matdes.2016.01.097.
  23. Yankelesky, D.A. and Leibowitz, O. (1999), "Punching shear in concrete slabs", J. Mech. Sci., 41(1), 1-15. https://doi.org/10.1016/S0020-7403(97)00086-6.