Advances in concrete construction

  • 제8권1호
  • /
  • Pages.47-54
  • /
  • 2019
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Combined effect of fine aggregate and silica fume on properties of Portland cement pervious concrete

  • Zhang, Yuanbo (Department of Civil Engineering, School of Transportation Science and Engineering, Beihang University) ;
  • Zhang, Wuman (Department of Civil Engineering, School of Transportation Science and Engineering, Beihang University) ;
  • Zhang, Yingchen (Department of Civil Engineering, School of Transportation Science and Engineering, Beihang University)
  • 투고 : 2018.11.09
  • 심사 : 2019.04.27
  • 발행 : 2019.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Portland cement pervious concrete has been expected to have good water permeability, mechanical properties and abrasion resistance at the same time when Portland cement pervious concrete is applied to the actual vehicle pavement. In this study, the coarse aggregate and cement were replaced by the fine aggregate and the silica fume to improve actual road performance Portland cement pervious concrete. The Mechanical properties, the water permeability and the abrasion resistance of Portland cement pervious concrete were investigated. The results show that the compressive strength, the flexural strength and the abrasion resistance are increased when the fine aggregate and the silica fume are added to Portland cement pervious concrete separately. However, the porosity and the water permeability are decreased simultaneously. With assistance of silica fume and fine aggregate simultaneously, Portland cement pervious concrete could achieve a higher strength. The compressive strength, the flexural strength and the abrasion resistance of Portland cement pervious concrete mixed with 5% fine aggregates and 8% silica fume are increased by 93.1%, 65% and 65.2%, respectively. The porosity and the water permeability are decreased by 22.4% and 85% when Portland cement pervious concrete is mixed with 5% fine aggregate and 8% silica fume. Therefore, the replacement ratio of the fine aggregates and the silica fume should be considered comprehensively and determined on the premise of ensuring the water permeability coefficient.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. ACI 522R-10 (2010), Report on Pervious Concrete, ACI Committee, 522, 38.
  2. Amparano, F.E., Xi, Y. and Roh, Y.S. (2000), "Experimental study on the effect of aggregate content on fracture behavior of concrete", Eng. Fract. Mech., 67, 65-84. https://doi.org/10.1016/S0013-7944(00)00036-9.
  3. Bassuoni, M.T. and Sonebi, M. (2010), "Pervious concrete: a sustainable drainage solution", Concrete, 44, 14-16.
  4. Belkacem, B., Madani, B., Khadra, B. and Michele, Q. (2014), "Effect of the type of sand on the fracture and mechanical properties of sand concrete", Adv. Concrete Constr., 2(1), 13-27. https://doi.org/10.12989/acc2014.2.1.013.
  5. Bu, J., Tian, Z., Zheng, S. and Tang, Z. (2017), "Effect of sand content on strength and pore structure of cement mortar", J. Wuhan Univ. Technol.-Mater. Sci. Ed., 32(2), 382-390. https://doi.org/10.1007/s11595-017-1607-9.
  6. Chindaprasrit, P., Hatanaka, S., Chareerat, T., Mishima, N. and Yuasa, Y. (2008), "Cement paste characteristics and porous concrete properties", Constr. Build. Mater., 22, 894-901. https://doi.org/10.1016/j.conbuildmat.2006.12.007.
  7. Chindaprasrit, P., Hatanaka, S., Chareerat, T., Mishima, N. and Yuasa, Y. (2009), "Effects of binder strength and aggregate size on the compressive strength and void ratio of porous concrete", Int. J. Miner. Metal. Mater., 16(6), 714-719. https://doi.org/10.1016/S1674-4799(10)60018-0.
  8. Chung, D.D.L. (2002), "Review improving cement-based materials by using silica fume", J. Mater. Sci., 37, 673-682. https://doi.org/10.1023/A:1013889725971.
  9. Cong, X., Gong, S., Darwin, D. and McCabe, S.L. (1992), "Role of silica fume in compressive strength of cement paste, mortar, and concrete", ACI Mater. J., 89(4), 375-387.
  10. Crouch, L.K., Pitt, J. and Hewitt, R. (2007), "Aggregate effects on pervious Portland cement concrete static modulus of elasticity", J. Mater. Civil Eng., 19, 561-568. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:7(561).
  11. Deo, O. and Neithalath, N. (2011), "Compressive response of pervious concretes proportioned for desired porosities", Constr. Build. Mater., 25, 4181-4189. https://doi.org/10.1016/j.conbuildmat.2011.04.055.
  12. Ghafoori, N. and Diawara, H. (2007), "Strength and wear resistance of sand-replaced silica fume concrete", ACI Mater. J., 104(2), 206-214.
  13. Haselbach, L., Boyer, M., Kevern, J. and Schaefer, V. (2011), "Cyclic heat island impacts on traditional versus pervious concrete pavement systems", J. Transp. Res. Board., 2240, 107-115. https://doi.org/10.3141/2240-14.
  14. Ibrahim, H.A. and Razak, H.A. (2016), "Effect of palm oil clinker incorporation on properties of pervious concrete", Constr. Build. Mater., 115, 70-77. https://doi.org/10.1016/j.conbuildmat.2016.03.181.
  15. Imam, A., Kumar, V. and Srivastava, V. (2018), "Review study towards effect of silica fume on the fresh and hardened properties of concrete", Adv. Concrete Constr., 6(2), 145-157. https://doi.org/10.12989/acc.2018.6.2.145.
  16. Jain, A.K. and Chouhan, J.S. (2011), "Effect of shape of aggregate on compressive strength and permeability properties of pervious concrete", Int. J. Adv. Eng. Res. Stud., 1, 120-126.
  17. Kevern, J.T., Biddle, D. and Cao, Q. (2014), "Effects of macrosynthetic fibres on pervious concrete properties", J. Mater. Civil Eng., 6, 15-21. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001213.
  18. Kevern, J.T., Haselbach, L. and Schaefer, V.R. (2012), "Hot weather comparative heat balances in pervious concrete and impervious concrete pavement systems", J. Heat Isl. Inst. Int., 7(2), 231-237.
  19. Kevern, J.T., Wang, K. and Schaefer, V.R. (2010), "Effect of coarse aggregate on the freeze-thaw durability of pervious concrete", J. Mater. Civil Eng., 22(5), 469-475. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000049.
  20. Khankhaje, E., Salim, M.R., Mirza, J., Hussin, M.W. and Rafieizonooz, M. (2016), "Properties of sustainable lightweight pervious concrete containing oil palm kernel shell as coarse aggregate", Constr. Build. Mater., 126, 1054-1065. https://doi.org/10.1016/j.conbuildmat.2016.09.010.
  21. Kjellsen, K.O., Wallevik, O.H. and Hallgren, M. (1999), "On the compressive strength development of high performance concrete and paste - effect of silica fume", Mater. Struct., 32, 63-69. https://doi.org/10.1007/BF02480414.
  22. Marolf, A., Neithalath, N., Sell, E., Wegner, K., Weiss, J. and Olek, J. (2004), "Influence of aggregate size and gradation on acoustic absorption of enhanced porosity concrete", ACI Mater. J., 101(1), 82-91.
  23. Mazloom, M., Ramezanianpour, A.A. and Brooks, J.J. (2004), "Effect of silica fume on mechanical properties of high-strength concrete", Cement Concrete Compos., 26, 347-357. https://doi.org/10.1016/S0958-9465(03)00017-9.
  24. Ministry of Housing and Urban-rural Development of P.R. China (2002), Standard for Test Method of Mechanical Properties on Ordinary Concrete, GB/T 50081-2002.
  25. Ministry of Housing and Urban-rural Development of P.R. China (2009), Technical Specification for Pervious Cement Concrete Pavement, CJJ/T135-2009.
  26. Ministry of Transport of the P.R. China (2005), Test Methods of Cement and Concrete for Highway Engineering, JTG E30-2005.
  27. Nguyen, D.H., Boutouil, M., Sebaibi, N., Leleyter, L. and Baraud, F. (2013), "Valorization of seashell by-products in pervious concrete pavers", Constr. Build. Mater., 46, 151-160. https://doi.org/10.1016/j.conbuildmat.2013.08.017.
  28. Rangelov, M., Nassiri, S., Haselbach, L. and Englund, K. (2016), "Using carbon fiber composites for reinforcing pervious concrete", Constr. Build. Mater., 126, 875-885. https://doi.org/10.1016/j.conbuildmat.2016.06.035.
  29. Singh, G. and Siddique, R. (2012), "Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS)", Constr. Build. Mater., 28(1), 421-426. https://doi.org/10.1016/j.conbuildmat.2011.08.087.
  30. Tennis, P.D., Leming, M.L. and Akers, D.J. (2004), "National ready mixed concrete association, pervious concrete pavements", Portland Cement Association, Skokie, IL.
  31. Torii, K. and Kawamura, M. (1994), "Pore structure and chloride ion permeability of mortars containing silica fume", Cement Concrete Compos., 16, 279-286. https://doi.org/10.1016/0958-9465(94)90040-X.
  32. Wu, D., Liu, X., Wu, X.Q. et al. (2009), "Effect of forming method and sand ratio on performance of pervious concrete", Concrete, 5, 100-102.
  33. Xu, G., Shen, W., Huo, X., Yang, Z., Wang, J., Zhang, W. and Ji, X. (2018), "Investigation on the properties of porous concrete as road base material", Constr. Build. Mater., 158, 141-148. https://doi.org/10.1016/j.conbuildmat.2017.09.151.
  34. Yahia, A. and Kabagire, D. (2014), "New approach to proportion pervious concrete", Constr. Build. Mater., 62, 38-46. https://doi.org/10.1016/j.conbuildmat.2014.03.025.
  35. Yang, J. and Jiang, G. (2002), "Experimental study on properties of pervious concrete pavement materials", Cement Concrete Res., 33, 381-386. https://doi.org/10.1016/S0008-8846(02)00966-3.
  36. Yuwadee, Z., Sata, V., Wongsa, A. and Chindaprasirt, P. (2016), "Properties of pervious concrete containing recycled concrete block aggregate and recycled concrete aggregate", Constr. Build. Mater., 111, 15-21. https://doi.org/10.1016/j.conbuildmat.2016.02.060.
  37. Zaetang, Y., Wongsa, A., Sata, V. and Chindaprasirt, P. (2017), "Influence of mineral additives on the properties of pervious concrete", Ind. J. Eng. Mater. Sci., 24(6), 507-515.
  38. Zampini, D., Jennings, H.M. and Shah, S.P. (1995), "Characterization of the paste aggregate interfacial zone to the fracture toughness of concrete", J. Mater. Sci., 30(12), 3149-3154. https://doi.org/10.1007/BF01209230.
  39. Zhang, W.M., Li, H.H. and Zhang, Y.C. (2018), "Effect of porosity on frost resistance of Portland cement pervious concrete", Adv. Concrete Constr., 6(4), 363-373. https://doi.org/10.12989/acc.2018.6.4.363.

피인용 문헌

  1. Experimental study on shear, tensile, and compression behaviors of composite insulated concrete sandwich wall vol.11, pp.1, 2019, https://doi.org/10.12989/acc.2021.11.1.033
  2. Optimizing the mix design of pervious concrete based on properties and unit cost vol.11, pp.4, 2021, https://doi.org/10.12989/acc.2021.11.4.285