DOI QR코드

DOI QR Code

Strengthening RC frames subjected to lateral load with Ultra High-Performance fiber reinforced concrete using damage plasticity model

  • Kota, Sai Kubair (Department of Civil Engineering, Delft University of Technology) ;
  • Rama, J.S. Kalyana (Department of Civil Engineering, Birla Institute of Technology & Science, Pilani-Hyderabad Campus) ;
  • Murthy, A. Ramachandra (Fatigue and Fracture Laboratory, Structural Engineering Research Center (CSIR-SERC))
  • 투고 : 2019.02.01
  • 심사 : 2019.06.06
  • 발행 : 2019.08.25

초록

Material non-linearity of Reinforced Concrete (RC) framed structures is studied by modelling concrete using the Concrete Damage Plasticity (CDP) theory. The stress-strain data of concrete in compression is modelled using the Hsu model. The structures are analyzed using a finite element approach by modelling them in ABAQUS / CAE. Single bay single storey RC frames, designed according to Indian Standard (IS):456:2000 and IS:13920:2016 are considered for assessing their maximum load carrying capacity and failure behavior under the influence of gravity loads and lateral loads. It is found that the CDP model is effective in predicting the failure behaviors of RC frame structures. Under the influence of the lateral load, the structure designed according to IS:13920 had a higher load carrying capacity when compared with the structure designed according to IS:456. Ultra High Performance Fiber Reinforced Concrete (UHPFRC) strip is used for strengthening the columns and beam column joints of the RC frame individually against lateral loads. 10mm and 20mm thick strips are adopted for the numerical simulation of RC column and beam-column joint. Results obtained from the study indicated that UHPFRC with two different thickness strips acts as a very good strengthening material in increasing the load carrying capacity of columns and beam-column joint by more than 5%. UHPFRC also improved the performance of the RC frames against lateral loads with an increase of more than 3.5% with the two different strips adopted. 20 mm thick strip is found to be an ideal size to enhance the load carrying capacity of the columns and beam-column joints. Among the strengthening locations adopted in the study, column strengthening is found to be more efficient when compared with the beam column joint strengthening.

키워드

참고문헌

  1. Ali Shah, S.A., Shahzads, K., Afzal, S., Shabab, M.E. and Khattak, N. (2013), "Behaviour of infill walls under lateral loads in reinforced concrete frames-A review", Int. J. Adv. Struct. Geotech. Eng., 2(3), 106-109.
  2. Ashish, U.K. and Harshalata, R. (2014), "Investigation on behaviour of reinforced concrete beam column joints retrofitted Fig. 37 Peak lateral loads of ELDS with both the strengthening locations with FRP wrapping", Int. J. Civil Eng. Res., 5(3), 2278-3652.
  3. Chalioris, C.E. (2013), "Steel fibrous RC beams subjected to cyclic deformations under predominant shear", Eng. Struct., 49, 104-118. https://doi.org/10.1016/j.engstruct.2012.10.010.
  4. Chalioris, C.E. and Panagiotopoulos, T.A. (2018), "Flexural analysis of steel fibre-reinforced concrete members", Comput. Concrete, 22(1), 11-25. https://doi.org/10.12989/cac.2018.22.1.011.
  5. Chalioris, C.E. and Sfiri, E.F. (2011), "Shear performance of steel fibrous concrete beams", Procedia Eng., 14, 2064-2068. https://doi.org/10.1016/j.proeng.2011.07.259.
  6. Chen, L. and Graybeal, B.A. (2011), "Modeling structural performance of ultrahigh performance concrete I-girders", J. Bridge Eng., 17(5), 754-764. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000305.
  7. Ermiao, L.I.N. and Pankaj, P. (2004), "Nonlinear static and dynamic analyses-The influence of material modeling In reinforced concrete frame structures", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada.
  8. Fadwa, I., Ali, T.A., Nazih, E. and Sara, M. (2014), "Reinforced concrete wide and conventional beam-column connections subjected to lateral load", Eng. Struct., 76, 34-48. https://doi.org/10.1016/j.engstruct.2014.06.029.
  9. Genikomsou, S. and Polak, M. (2015), "Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS", Eng. Struct., 98, 38-48. https://doi.org/10.1016/j.engstruct.2015.04.016.
  10. Jankowiak, T. and Lodygowski, T. (2005), "Identification of parameters of concrete damage plasticity constitutive model", Found. Civil Environ. Eng., 6(1), 53-69.
  11. Kalyana Rama, J.S., Chauhan, D.R., Sivakumar, M.V.N., Vasan, A. and Murthy, A.R. (2017), "Fracture properties of concrete using damaged plasticity model-A parametric study", Struct. Eng. Mech., 64(1), 59-69. https://doi.org/10.12989/sem.2017.64.1.059.
  12. Lampropoulos, A.P., Paschalis, S.A., Tsioulou, O.T. and Dritsos, S.E. (2016), "Strengthening of reinforced concrete beams using ultra high performance fibre reinforced concrete (UHPFRC)", Eng. Struct., 106, 370-384. https://doi.org/10.1016/j.engstruct.2015.10.042.
  13. Michal, S. and Winnicki, (2015), "Numerical simulations of corners in RC frames using Strut-and-Tie method and CDP model", Proceedings of the XIII International Conference on Computational Plasticity: Fundamentals and Applications, CIMNE ed. Barcelona, 608-619
  14. Prem, P.R., Murthy, A.R., Ramesh, G., Bharatkumar, B.H. and Iyer, N.R. (2015), "Flexural behaviour of damaged rc beams strengthened with ultra high performance concrete", Adv. Struct. Eng., 2057-2069. https://doi.org/10.1007/978-81-322-2187-6_158.
  15. Rahman, S., Molyneaux, T. and Patnaikuni, I. (2005), "Ultra high performance concrete: recent applications and research", Austr. J. Civil Eng., 2(1), 13-20. https://doi.org/10.1080/14488353.2005.11463913.
  16. Sumer, Y. and Aktas, M. (2015), "Defining parameters for concrete damage plasticity model", Challenge, 1(3), 149-155.
  17. Tayeh, B.A., Bakar, B.A., Johari, M.M. and Voo, Y.L. (2013), "Utilization of ultra-high performance fibre concrete (UHPFC) for rehabilitation-a review", Procedia Eng., 54, 525-538. https://doi.org/10.1016/j.proeng.2013.03.048.
  18. Truong, G.T., Kim, J.C. and Choi, K.K. (2017), "Seismic performance of reinforced concrete columns retrofitted by various methods", Eng. Struct., 134, 217-235. https://doi.org/10.1016/j.engstruct.2016.12.046.
  19. Tsonos, A.G. (2009), "Steel fiber high-strength reinforced concrete: a new solution for earthquake strengthening of old R/C structures", WIT Tran. Built Environ., 104, 153-164. https://doi.org/10.2495/ERES090141
  20. Tsonos, A.G. (2009), "Ultra-high-performance fiber reinforced concrete: an innovative solution for strengthening old R/C structures and for improving the FRP strengthening method", WIT Tran. Eng. Sci., 64, 273-284. https://doi.org/10.2495/MC090261

피인용 문헌

  1. Seismic performance improvement of RC buildings with external steel frames vol.27, pp.4, 2019, https://doi.org/10.12989/cac.2021.27.4.343