DOI QR코드

DOI QR Code

Design, modelling and analysis of a new type of IPMC motor

  • Kolota, Jakub (Faculty of Computing, Poznan University of Technology)
  • Received : 2018.03.29
  • Accepted : 2019.05.10
  • Published : 2019.08.25

Abstract

The properties of Electroactive Polymer (EAP) materials are attracting the attention of engineers and scientists from many different disciplines. From the point-of-view of robotics, Ionic Polymer Metal Composites (IPMC) belong to the most developed group of the EAP class. To allow effective design of IPMC-actuated mechanisms with large induced strains, it is necessary to have adequate analytical tools for predicting the behavior of IPMC actuators as well as simulating their response as part of prototyping methodologies. This paper presents a novel IPMC motor construction. To simulate the bending behavior that is the dominant phenomenon of motor movement process, a nonlinear model is used. To accomplish the motor design, the IPMC model was identified via a series of experiments. In the proposed model, the curvature output and current transient fields accurately track the measured responses, which is verified by measurements. In this research, a three-dimensional Finite Element Method (FEM) model of the IPMC motor, composed of IPMC actuators, simultaneously determines the mechanical and electrical characteristics of the device and achieves reliable analysis results. The principle of the proposed drive and the output signals are illustrated in this paper. The proposed modelling approach can be used to design a variety of controllers and motors for effective micro-robotic applications, where soft and complex motion are required.

Keywords

References

  1. Bar-Cohen, Y. (2001), Electroactive polymer (EAP) actuators as artificial muscles: reality, potential, and challenges, SPIE Press, Bellingham, WA, USA.
  2. Bernat, J. and Kolota, J. (2016), "Sensorless position estimator applied to nonlinear IPMC model", Smart Mater. Struct., 25(11), 115037. https://doi.org/10.1088/0964-1726/25/11/115037
  3. Bernat, J., Kolota, J. and Stepien, S. (2017), "SDRE controller considering multi observer applied to nonlinear ipmc model", Smart Struct. Syst., 20(1), 1-10. https://doi.org/10.12989/sss.2017.20.1.001.
  4. Bernat, J., Kolota, J. and Stepien, S. (2013), "The fem analysis of electromagnetic torque of hybrid stepper motor with different load", Electrical Review, 89(7), 186-189.
  5. Bernat, J., Kolota, J., Stepien, S. and Szymanski, G. (2014), "Adaptive control of permanent magnet synchronous motor with constrained reference current exploiting backstepping methodology", Proceedings of the IEEE Conference on Control Applications (CCA), Juan Les Antibes, France, October.
  6. Bhattacharya, S., Bepari, B. and Bhaumik, S. (2016), "Soft robotic finger fabrication with pdms and ipmc actuator for gripping", SAI Computing Conference (SAI), London, UK, July.
  7. Chen, Z., Hedgepeth, D.R. and Tan, X. (2009), "A nonlinear, control-oriented model for ionic polymer-metal composite actuators", Smart Mater. Struct., 18(5), 055008. https://doi.org/10.1088/0964-1726/18/5/055008
  8. Farinholt, K.M. (2005), "Modeling and characterization of ionic polymer transducers for sensing and actuation", Ph.D. Dissertation, Virginia Polytechnic Institute and State University.
  9. Feng, G.H. and Huang, W.L. (2016), "Investigation on the mechanical and electrical behavior of a tuning fork-shaped ionic polymer metal composite actuator with a continuous water supply mechanism", Sensors, 16(4), Published online. https://doi.org/10.3390/s16040433.
  10. Hao, L., Chen, Y. and Sun, Z. (2015), "The sliding mode control for different shapes and dimensions of IPMC on resisting its creep characteristics", Smart Mater. Struct., 24(4), 045040. https://doi.org/10.1088/0964-1726/24/4/045040
  11. Jain, R.K., Datta, S. and Majumder, S. (2013), "Design and control of an IPMC artificial muscle finger for micro gripper using emg signal", Mechatronics, 23(3), 381-394. https://doi.org/10.1016/j.mechatronics.2013.02.008.
  12. Kentaro, T., Zhi, W.L., Kinji, A., and Kenji, T., "Limited-angle motor using ionic polymer-metal composite", Proc. SPIE 5759, Smart Structures and Materials 2005: Electroactive Polymer Actuators and Devices (EAPAD), (6 May 2005); doi: 10.1117/12.599503;
  13. Khawwaf, J., Zheng, J., Al-Cihanimi, A., Man Z, and Nagarajah, R. (2016), "Modeling and tracking control of an ipmc actuator for underwater applications", Proceedings of the International Conference on Advanced Mechatronic Systems (ICAMechS), Melbourne, Australia, November.
  14. Kwang, J.K. and Tadokoro, S. (2007), Electroactive polymers for robotics applications, Artificial muscles and sensors, Springer-Verlag, London.
  15. Lutkenhaus, J. (2016), "Electroactive polymers as battery electrodes", TechConnect Briefs, 2, 39-41.
  16. McDaid, A.J., Aw, K.C., Haemmerle, E. and Xie, S.Q. (2012), "Control of ipmc actuators for microfluidics with adaptive "online" iterative feedback tuning", IEEE/ASME T. Mechatron., 17(4), 789-797. DOI: 10.1109/TMECH.2011.2135373.
  17. McDaid, A., Aw, A.C., Patel, K., Xie, S. and Haemmerle, E. (2010), "Development of an ionic polymer-metal composite stepper motor using a novel actuator model", Smart Nano Mater., 1(4), 261-277. https://doi.org/10.1080/19475411.2010.523123.
  18. Nemat-Nasser, S. and Li, J. (2000), "Electromechanical response of ionic polymer-metal composites", J. Appl. Phys., 87(7), 3321-3331. https://doi.org/10.1063/1.372343.
  19. Newbury, K. (2002), "Characterization, Modeling, and Control of Ionic Polymer Transducers", Ph.D. Dissertation, Virginia Polytechnic Institute and State University, Virginia.
  20. Newbury, K.M. and Leo, D.J. (2002), "Electromechanical modeling and characterization of ionic polymer benders", J. Intel. Mat. Syst. Str., 13(1), 51-60. https://doi.org/10.1177/1045389X02013001978.
  21. Shahinpoor, M. (2003), "Ionic polymer-conductor composites as biomimetic sensors, robotic actuators and artificial muscles - a review", Electrochimica Acta, 48(14-16), 2343-2353. https://doi.org/10.1016/S0013-4686(03)00224-X.
  22. Shi, L., He, Y., Guo, S., Kudo, H., Li, M. and Asaka K. (2013), "IPMC actuator-based a movable robotic venus flytrap", Proceedings of the ICME International Conference on Complex Medical Engineering, Beijing, China, May.
  23. Sunkara, V., Ye, Z., Chakravarthy, A. and Chen, Z. (2016), "Collision avoidance by ipmc actuated robotic fish using the collision cone approach", Proceedings of the 2016 IEEE International Conference on Simulation, Modeling, and Programming for Autonomous Robots (SIMPAR), San Francisco, CA, USA, December.
  24. Waldmann, C. and Richter, L. (2007), "Traction properties of the wheels of an underwater crawler on different soils", Proceedings of the Oceans Conference Record (IEEE), Vancouver, BC, Canada, September.
  25. Wang, H., Chen, J., Lau, H. and Ren, H. (2016), "Motion planning based on learning from demonstration for multiple-segment flexible soft robots actuated by electroactive polymers", IEEE Robot. Automat. Lett., 1(1), 391-398. DOI: 10.1109/LRA.2016.2521384.
  26. Wang, J., McDaid, A.J., Lu, C.Z. and Aw K.C. (2017), "A compact ionic polymer-metal composite (IPMC) actuated valveless pump for drug delivery", IEEE/ASME T. Mechatron., 22(1), 196-205. DOI: 10.1109/TMECH.2016.2624762.
  27. Weiyan, S., Canjun, Y. and Faju, Q. (2016), "Analysis on the steering characteristics of an underwater exploration robot", Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Banff, AB, Canada, September.
  28. Whitcomb, L., Yoerger, D., Singh, H. and Howland, J. (2000), "Advances in underwater robot vehicles for deep ocean exploration: Navigation, control, and survey operations", in: (Eds., Hollerbach J.M. and Koditschek D.E.), Robotics Research, Springer, London.
  29. Zhao, Y., Xu, B., Zheng, G., Zheng, J., Qiu, X., Zhuang, M. and Sun, D. (2013), "Improving the performance of IPMCs with a gradient in thickness", Smart Mater. Struct., 22(11), 115035. https://doi.org/10.1088/0964-1726/22/11/115035
  30. Zhu, Z., Chang, L., Asaka, K., Wang, Y., Chen, H., Zhao, H. and Li, D. (2014), "Comparative experimental investigation on the actuation mechanism of ionic polymer-metal composites with different backbones and water contents", J. Appl. Phys., 115, 124903. https://doi.org/10.1063/1.4869537.
  31. Xing, H.L., Jeon, J.H., Park, K.C. and Oh I.K. (2013), "Active disturbance rejection control for precise position tracking of ionic polymermetal composite actuators", IEEE/ASME T. Mechatron., 18(1), 86-95. DOI: 10.1109/TMECH.2011.2163524.
  32. Yow, S.Z., Lim, T.H., Yim, E.K.F., Lim, C.T. and Leong, K.W. (2011), "A 3d electroactive polypyrrole-collagen fibrous scaffold for tissue engineering", Polymers, 3(1), 527-544. https://doi.org/10.3390/polym3010527.