DOI QR코드

DOI QR Code

Development of an analytical method for optimum design of reinforced concrete beams considering both flexural and shear effects

  • Zivari, Ahmad (Department of Civil Engineering, Shahed University) ;
  • Habibi, Alireza (Department of Civil Engineering, Shahed University) ;
  • Khaledy, Nima (Department of Civil Engineering, Najafabad Branch, Islamic Azad University)
  • 투고 : 2018.08.18
  • 심사 : 2019.06.04
  • 발행 : 2019.08.25

초록

Optimization is an important subject which is widely used in engineering problems. In this paper, an analytical method is developed for optimum design of reinforced concrete beams considering both flexural and shear effects. A closed-form formulation is derived for optimal height and rebar of beams. The total material cost of steel and concrete is considered as the objective function which is minimized during the optimization process. The ultimate flexural and shear capacities of the beam are considered as the main constraints. The ultimate limit state is considered for deriving the relations for flexural capacity of the beam. The design requirements are considered according to the item 9 of the Iranian National Building. Analytical formulas and some curves are proposed to be used for optimum design of RC beams. The proposed method can be used to perform the optimization of RC beams without the need of any prior knowledge in optimization. Also, the results of the studied numerical example show that the proposed method results in a better design comparing with the other methods.

키워드

참고문헌

  1. Adamu, A. and Karihaloo, B.L. (1994), "Minimum cost design of RC beams using DCOC Part II: Beams with uniform crosssections", Struct. Optim., 7(4), 252-259. https://doi.org/10.1007/BF01743720.
  2. Alghamdi, S.A. and Ahmad, S. (2018), "On durability of reinforced concrete structures: A design methodology for RC beams and columns in corrosive environments", Arab. J. Sci. Eng., 43(10), 5387-5396. https://doi.org/10.1007/s13369-018-3101-x.
  3. Arora, J.S., Elwakeil, O.A., Chahande, A.I. and Hsieh, C.C. (1995), "Global optimization methods for engineering applications: A review", Struct. Optim., 9(3-4), 137-159. https://doi.org/10.1007/BF01743964.
  4. Barros, M.H.F.M., Martins, R.A.F. and Barros, A.F.M. (2005), "Cost optimization of singly and doubly reinforced concrete beams with EC2-2001", Struct. Multidisc. Optim., 30(3), 236-242. https://doi.org/10.1007/s00158-005-0516-2.
  5. Ceranic, B. and Fryer, C. (2000), "Sensitivity analysis and optimum design curves for the minimum cost design of singly and doubly reinforced concrete beams", Struct. Multidisc. Optim., 20(4), 260-268. https://doi.org/10.1007/s001580050156.
  6. Chutani, S. and Singh, J. (2017), "Design optimization of reinforced concrete beams", J. Inst. Eng. (India): Ser. A, 98(4), 429-435. https://doi.org/10.1007/s40030-017-0232-0.
  7. Cox, H.L. and Smith, H.E. (1943), Structures of Minimum Weight, HM Stationery Office.
  8. Esfandiari, M.J., Urgessa, G.S., Sheikholarefin, S. and Manshadi, S.H.D. (2018), "Optimum design of 3D reinforced concrete frames using DMPSO algorithm", Adv. Eng. Softw., 115, 149-160. https://doi.org/10.1016/j.advengsoft.2017.09.007.
  9. Fedghouche, F. (2017), "Cost optimum design of doubly reinforced high strength concrete T-beams", Scientia Iranica, 24(2), 476-486. https://doi.org/10.24200/sci.2017.2411
  10. Gharehbaghi, S. (2018), "Damage controlled optimum seismic design of reinforced concrete framed structures", Struct. Eng. Mech., 65(1), 53-68. https://doi.org/10.12989/sem.2018.65.1.053.
  11. Gharehbaghi, S., Moustafa, A. and Salajegheh, E. (2016), "Optimum seismic design of reinforced concrete frame structures", Comput. Concrete, 17(6), 761-786. http://dx.doi.org/10.12989/cac.2016.17.6.761.
  12. Habibi, A., Ghawami, F. and Shahidzadeh, M. S. (2016), "Development of optimum design curves for reinforced concrete beams based on the INBR9", Comput. Concrete, 18(5), 983-998. http://dx.doi.org/10.12989/cac.2016.18.5.983.
  13. Mergos, P.E. (2016), "Optimum seismic design of reinforced concrete frames according to Eurocode 8 and fib Model Code 2010", Earthq. Eng. Struct. Dyn., 46(7), 1181-1201. https://doi.org/10.1002/eqe.2851.
  14. Nigdeli, S.M. and Bekdas, G. (2017), "Optimum design of RC continuous beams considering unfavourable live-load distributions", KSCE J. Civil Eng., 21(4), 1410-1416. https://doi.org/10.1007/s12205-016-2045-5.
  15. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.
  16. Silva, A.R. and Faria, F.C. (2018), "Optimization of reinforced concrete polygonal sections under biaxial bending with axial force", Lat. Am. J. Solid. Struct., 15(10). http://dx.doi.org/10.1590/1679-78254252.
  17. Uz, M.E., Sharafi, P., Askarian, M., Fu, W. and Zhang, C. (2018), "Automated layout design of multi-span reinforced concrete beams using charged system search algorithm", Eng. Comput., 35(3), 1402-1413. https://doi.org/10.1108/EC-05-2017-0188.