Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Rotary Swaging Process Simulation using DEFORM

DEFORM을이용한 로터리 스웨이징 공정의 시뮬레이션에 대한 연구

  • Received : 2019.04.19
  • Accepted : 2019.05.24
  • Published : 2019.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Rotary swaging is a method of forging automotive drive shafts. In this paper, we propose a new two-hammer forging technique by applying the problem-solving approach TRIZ to improve the efficiency and productivity of the rotary swaging automation process. We will simplify the materials and hammers via the 3D modeling tool SolidWorks for high accuracy of a comparative analysis of existing and proposed methods under the same boundary conditions. In addition, we will compare the stress trends of the proposed model using ANSYS Workbench and verify the feasibility through a comparison of the simulation results using DEFORM. Relative to the existing method, the proposed method can decrease production costs and improve efficiency of the automation process by reducing the power source.

Keywords

References

  1. Lim, S. J., Lee, N. K. and Oh, T. W. and Lee, J. H., "Forging Process of the Automotive TDS (Tube Drive Shaft) by the Rotary Swaging Process", The Korean Society For Technology of Plasticty, Vol. 12, no. 6, pp 558-565, 2003.
  2. Sul, S. S., "A Study on 4-Hammer Radial Impact Forging Method for Development of Monoblock Tubular Shafts for Vehicle", A Thesis for a Doctorate, Changwon National University, Jun 2017.
  3. Hebdzynski, R., Kajzer, S. and Kozik, R. "Forging on the four-lever arms swaging machines", Journal of Materials Processing Technology., Vol. 64, No. 1/3, pp.199-206, 1997. https://doi.org/10.1016/S0924-0136(96)02568-X
  4. Lim, S, J., Yoon, S, J., Na, N, H., "The Forming Characteristic of Rotary Swaging Process", The Korean Society For Technology of Plasticity, pp.273-280, 1997.
  5. ASM Metals Handbook, Forging, "Rotary Swaging of Bar and Tubes", Vol.4, pp.333-346, 1969.
  6. Kim, H. J., "Practical TRIZ with 6 levels of creativity", February 2006.
  7. Lee, S. J., Chung, W. J., Kim, H. J., Kim, G. G., Kim, J. H. "A Study on Optimal Design of Piece Removing Automation System Using TRIZ and Brainstorming, Journal of the Korean Society of Machine Tool Engineers, Vol. 17, No.6, December 2008.
  8. Chung, W. J., Kim, J. M., Park, K. B., Ju, J. H., Sin, O. C., "A Study on design of polishing film transfer guide by using TRIZ", Korean Society Of Precision Engineering, 2006.

Cited by

  1. TRIZ와 DEFORMⓇ을 활용한 트랜지션 노즐의 성형 공정 개선을 위한 가변 금형에 대한 연구 vol.19, pp.6, 2019, https://doi.org/10.14775/ksmpe.2020.19.06.029