참고문헌
- Kim, J. S., Kang, S. K., Lee, D. S., "A Study on the Machining Characteristics of Prototype of Roller Gear Cams", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 60-70, 2012.
- Kim, J. S., Kim, Y. J., "Cutting Performance of a Developed Small Angle Spindle Tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 111-117, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.111
- Shin, M. J. "A Study on the Machined Characteristics of SCM415 Still Cutting", A Thesis for a Master, Kyungnam University, Republic of Korea, 2011.
- Ahn, K. W. Jeon, E. C. Kim, T. H. "Turning Machining Optimization using Software Based on Cutting Force Model", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 107-112, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.107
- Kim, M. Y. Li, C. P. Kim, J. H. Ko, T. J. "Machining Characteristics of the Hybrid Machining System Comprising of EDM and Endmilling", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 86-92, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.086
- Lee, Y. C., Kwak, T. S., Kim, G. N., Lee, J. R. "High-speed Machining Technology using CNC Machining Center Equipped with Attachment Type High-Speed Spindle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 152-158, 2012.
- Doo, S., Hong, J. W., Suh, N. S., "A Study on the Cutting Force and Machining Error on the Inclined Plane in Ball-end Milling", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 7, pp. 112-119, 2001.
- Choi, S. Y., Kwon, D. K., "A Study of the Effectives for Surface Roughness by Cutting Angle and Cutting Fluid", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 57, 2018. https://doi.org/10.14775/ksmpe.2018.17.1.057
- Greenhow, J. N., Rubenstein, C.. "The dependence of Cutting Force on Feed and Speed in Orthogonal Cutting with Worn Tools", International Journal of Machine Tool Design and Research, Vol. 9, pp.1-16, 1969. https://doi.org/10.1016/0020-7357(69)90025-0
- Solaja, V., "Wear of Carbide tools and Surface Finish Generated Finish Turing of Steel", Wear Vol. 2, pp. 40-50, 1958. https://doi.org/10.1016/0043-1648(58)90339-9
- Olson, K. V., "Surface Roughness on Turned steel Componented and the Relevant Mathematical Analysis", Production Engineer, Vol. 47, No. 12, pp. 593-606, 1968. https://doi.org/10.1049/tpe.1968.0098
- Lee, S. K., "Introduction of deposition technology", LG POLYMER JOURNAL, pp. 10, 2014.
피인용 문헌
- SNCM616 합금강을 이용한 표면조도 특성에 관한 연구 vol.22, pp.6, 2019, https://doi.org/10.21289/ksic.2019.22.6.607