Geomechanics and Engineering

  • 제18권5호
  • /
  • Pages.545-554
  • /
  • 2019
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Comparative review and interpretation of the conventional and new methods in blast vibration analyses

  • Uyar, G. Gulsev (Hacettepe University Faculty of Engineering, Department of Mining Engineering) ;
  • Aksoy, C.O. (Dokuzeylul University Faculty of Engineering, Department of Mining Engineering)
  • 투고 : 2019.01.18
  • 심사 : 2019.07.15
  • 발행 : 2019.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

The customary approach used in the blast vibration analysis is to derive empirical relations between the peak particle velocities of blast-induced waves and the scaled distance, and to develop patterns limiting the amounts of explosives. During the periods when excavations involving blasting were performed at sites far from residential areas and infrastructure works, this method based on empirical correlations could be effective in reducing vibrations. However, blasting procedures applied by the fast-moving mining and construction industries today can be very close to, in particular cities, residential areas, pipelines, geothermal sites, etc., and this reveals the need to minimize blast vibrations not only by limiting the use of explosives, but also employing new scientific and technological methods. The conventional methodology in minimizing blast vibrations involves the steps of i) measuring by seismograph peak particle velocity induced by blasting, ii) defining ground transmission constants between the blasting area and the target station, iii) finding out the empirical relation involving the propagation of seismic waves, and iv) employing this relation to identify highest amount of explosive that may safely be fired at a time for blasting. This paper addresses practical difficulties during the implementation of this conventional method, particularly the defects and errors in data evaluation and analysis; illustrates the disadvantages of the method; emphasizes essential considerations in case the method is implemented; and finally discusses methods that would fit better to the conditions and demands of the present time compared to the conventional method that intrinsically hosts the abovementioned disadvantages.

키워드

참고문헌

  1. Adhikari, G.R., Theresraj, A.I., Venkatesh, S., Balachander, R. and Gupta, R.N. (2004), "Ground vibration due to blasting in limestone quarries", Int. J. Blast. Fragment., 8(2), 85-94. https://doi.org/10.1080/13855140412331336160.
  2. Aldas, G.G.U. (2010), "Explosive charge mass and peak particle velocity (PPV-frequency relation in mining blast", J. Geophys. Eng., 7(1), 223-231. https://doi.org/10.1088/1742-2132/7/3/001.
  3. Aldas, G.G.U. and Ecevitoglu, B. (2008), "Waveform analysis in mitigation of blast-induced vibrations", J. Appl. Geophys., 66(1-2), 25-30. https://doi.org/10.1016/j.jappgeo.2008.08.004.
  4. Aldas, G.G.U. and Ecevitoglu, G.B. (2011), "Patlatma kaynakli titresimlerin en aza indirilmesini saglayan yontem", Research No. 03459, TPE, Ankara, Turkey.
  5. Aldas, G.G.U., Ecevitoglu, B., Can, A., Unucok, B. and Sagol, O. (2006), "Blast minimisation report at South Aegean lignites", Research Report No.1, Turkish Coal Interprises, Ankara, Turkey.
  6. Ambraseys, N.R. and Hendron, A.J. (1968), Dynamic Behaviour of Rock Masses, in Rock Mechanics in Engineering Practices, Wiley, London, U.K.
  7. Anderson, D.A. (1993), Blast Monitoring: Regulations, Methods and Control Techniques, in Comprehensive Rock Engineering Practice and Projects Excavation, Support and Monitoring, Pergamon Press, 95-134.
  8. Anderson, D.A., Winzer, S.R. and Ritter. A.P. (1982), "Blast design for optimizing fragmentation while controlling frequency of ground vibration", Proceedings of the 8th Conference on Explosives and Blasting Technique, New Orleans, Louisiana, U.S.A., February.
  9. Ataei, M. and Kamali, M. (2013), "Prediction of blast-induced vibration by adaptive neuro-fuzzy inference system in Karoun 3 power plant and dam", J. Vib. Control, 19(12), 1906-1914. https://doi.org/10.1177%2F1077546312444769. https://doi.org/10.1177/1077546312444769
  10. Babayigit, E. (2012), "Komur damari ici patlatma kaynakli kanal dalgalarinin ve cevresel etkilerinin incelenmesi", M.Sc. Dissertation, Ankara University, Ankara, Turkey.
  11. Babayigit, E. and Aldas, G.G.U. (2013), "Komur damari ici patlatma kaynakli kanal dalgalarinin titresim genlikleri uzerindeki etkilerinin incelenmesi", Proceedings of the International Mining Congress and Exhibition Of Turkey, Antalya, Turkey, April.
  12. Bilgin, H.A., Esen, S., Kilic, M. and Aldas, G.G.U. (2000), "Blasting minimisation studies at Yenikoy lignite mine", Proceedings of the 4th Drilling and Blasting Symposium, Ankara, Turkey.
  13. Blair, D.P. (2004), "Charge weight scaling laws and the superposition of blast vibration waves", Fragblast, 8(4), 221-239. https://doi.org/10.1080/13855140412331291610.
  14. Blair, D.P. (2010), "Seismic radiation from an explosive column", Geophysics, 75(1), E55-E65. https://doi.org/10.1190/1.3294860.
  15. Blair, D.P. (2014), "Blast vibration dependence on charge length, velocity of detonation and layered media", Int. J. Rock Mech. Min. Sci., 65(1), 29-39. https://doi.org/10.1016/j.ijrmms.2013.11.007.
  16. Can, A.Z. (2007), "Yuzey dalgalari/Temel kaya etkilesimi ve 3B sismik isin izleme yontemiyle Zemin buyutmesi haritalarinin olusturulmasi", M.Sc. Dissertation, Ankara University, Ankara, Turkey.
  17. Cardu, M., Mucci, A. and Uyar, G.G. (2015), "Investigating the effects of bench geometry and delay times on the blast induced vibrations in an open-pit quarry", GEAM, 144(1), 45-56.
  18. Chen, G. and Huang, S. (2001), "Analysis of ground vibrations caused by open pit production blasts: A case study", Fragblast, 5(1), 91-107. https://doi.org/10.1076/frag.5.1.91.3316
  19. Cihangir, F., Kesimal, A., Ercikdi, B. and Durmus, O. (2005), "Bir Kalker Ocaginda Patlatmak Kazilardan Kaynaklanan Cevresel Etkilerin Analizi", Trabzon Madencilik ve Cevre Sempozyumu, Karadeniz Teknik Universitesi, Maden Muhendisligi Bolumu, Turkey.
  20. Davies, B., Farmer, W. and Attewell, P.B. (1964), Ground Vibration from Shallow Sub-Surface Blasts, The Engineering, Wiley, London, U.K.
  21. Dowding, C.H. (1980), "Structure response and damage produced by ground vibration from surface mine blasting", RI: 8507, US Bureau of Mines, Washington, D.C., U.S.A.
  22. Dowding, C.H. (1985), Blast Vibration Monitoring and Control, Prentice Hall, Englewood Cliffs, New Jersey, U.S.A.
  23. Duvall, W.I. and Fogleson, D.E. (1962), "Review of criteria for estimating damage to residences from blasting vibration", RI:5968, US Bureau of Mines, Washington, D.C., U.S.A.
  24. Essen, K., Bohlen, T., Friederich, W. and Meier, T. (2007), "Modelling of Rayleigh-type seam waves in disturbed coal seams and around a coal mine roadway", Geophys. J. Int., 170(1), 511-526. https://doi.org/10.1111/j.1365-246X.2007.03436.x.
  25. Ghasemi, E., Ataei, M. and Hashemolhosseini, H. (2013), "Development of a fuzzy model for predicting ground vibration caused by rock blasting in surface mining", J. Vib. Control, 19(5), 755-770. https://doi.org/10.1177%2F1077546312437002. https://doi.org/10.1177/1077546312437002
  26. Gholamreza, H., Abdollahzadeh, A. and Hadi, F. (2017), "A method to evaluate the risk-based robustness index in blast-influenced structures", Earthq. Struct., 12(1), 47-54. https://doi.org/10.12989/eas.2017.12.1.047.
  27. Ghosh, A. And Daemen, J.J.K. (1983), "A simple new blast vibration predictor (Based on Wave Propagation Laws)", Proceedings of the U.S. Symposium on Rock Mechanics, Texas, U.S.A., June.
  28. Gupta, R.N., Roy, P.P., Bagachi, A. and Singh, B. (1987), "Dynamic effects in various rock mass and their predictions", J. Mines Met. Fuels, 12(1), 455-462.
  29. Hoshino, T., Mogi, G. and Shaoquan, K. (2000), "Optimum delay interval design in delay blasting", Fragblast, 4(2), 139-148. https://doi.org/10.1076/frag.4.2.139.7448
  30. Indian Standard Institute (1973), "Criteria for safety and design of structures subjected to underground blast", Report No: IS-6922, Indian Mining Institue, India.
  31. Kamali, M. and Ataei, M. (2011), "Prediction of blast induced vibrations in the structures of Karoun III power plant and dam", J. Vib. Control, 17(4), 541-548. https://doi.org/10.1177%2F1077546310370985. https://doi.org/10.1177/1077546310370985
  32. Khandelwal, M. (2012), "Application of an expert system for the assessment of blast vibration", Geotech. Geol. Eng., 30(4), 205-217. https://doi.org/10.1007/s10706-011-9463-4.
  33. Khandelwal, M. and Singh, T.N. (2007), "Evaluation of blast-induced ground vibration predictors", Soil Dyn. Earthq. Eng., 27(2), 116-125. https://doi.org/10.1016/j.soildyn.2006.06.004.
  34. Konya, C. (1991), Surface Blast Design, Prentice Hall, New Jersey, U.S.A.
  35. Langefors, U. and Kihlstrom, B. (1967), The Modern Technique of Rock Blasting, Almqvist & Wiksell, Stockholm, Sweden.
  36. Lavergne, M. (1989), Seismic Methods, Technip, Paris, France.
  37. Li, A., Fang, Q., Zhang, D., Luo, J. and Hong, X. (2018), "Blast vibration of a large-span high-speed railway tunnel based on microseismic monitoring", Smart Struct. Syst., 21(5), 561-569. https://doi.org/10.12989/sss.2018.21.5.561.
  38. Li, X., Wang, E., Li, Z., Bie, X., Chen, L., Feng, J. and Li, N. (2016), "Blasting wave pattern recognition based on Hilbert-Huang transform", Geomech. Eng., 11(5), 607-624. https://doi.org/10.12989/gae.2016.11.5.607.
  39. Mohammadnejad, M., Gholam, R., Ramezanzadeh, A. and Jalali, M.E. (2012), "Prediction of blast-induced vibrations in limestone quarries using Support Vector Machine", J. Vib. Control, 18(9),1322-1329. https://doi.org/10.1177%2F1077546311421052. https://doi.org/10.1177/1077546311421052
  40. Muller, B. (1997), "Adapting blasting technologies to the characteristics of rock masses in order to improve blasting results and reduce blasting vibrations", Fragblast, 1(1),361-378. https://doi.org/10.1080/13855149709408403.
  41. Muller, B. and Hohlfeld, T.H. (1997), "New possibility of reducing blasting vibrations with an improved prognosis", Fragblast, 1(1), 379-392. https://doi.org/10.1080/13855149709408404.
  42. Nreholls, H.R., Johnson, CF. and Duvall, W.l. (1971), Blasting, Prentice-Hall, New Jersey, U.S.A.
  43. Oppenheim, A.V. and Schafer, R.W. (1975), Digital Signal Processing, Prentice-Hall, New Jersey, U.S.A.
  44. Ozacar, V. (2018), "New methodology to prevent blasting damages for shallow tunnel", Geomech. Eng., 15(6), 1227-1236. https://doi.org/10.12989/gae.2018.15.6.1227
  45. Persson, P.A., Holmberg, R. and Lee, J. (1994), Rock Blasting and Explosives Engineering, CRC Press.
  46. Ravindra, R. and Cerveny, V. (1971), Theory of Seismic Head Waves, University of Toronto Press, Toronto, Canada.
  47. Roy, P.P. (1991), "Vibration control in an opencast mine based on improved blast vibration predictors", Min. Sci. Technol., 12(31), 157-165. https://doi.org/10.1016/0167-9031(91)91642-U.
  48. Singh, P.K. and Roy, M.P. (2010), "Damage to surface structures due to blast vibration", Int. J. Rock Mech. Min. Sci., 47(6), 949-961. https://doi.org/10.1016/j.ijrmms.2010.06.010.
  49. Siskind, D.E. (2000), Vibrations from Blasting, International Society of Explosives Engineers.
  50. Siskind, D.E., Crum, S.V., Otterness, R.E. and Kopp, J.W. (1989), "Comparative study of blasting vibrations from Indiana surface coal mine", Report No: RI 9226, US Bureau of Mines, Washington, D.C., U.S.A.
  51. Siskind, D.E., Stagg. M.S., Kopp, J.W. and Dowding, C.H. (1980), "Structure response and damage produced by ground vibrations from surface mine blasting", Report No: RI 8507, US Bureau of Mines, Washington, D.C., U.S.A.
  52. Song, Z., Li, S., Wang, J.B., Sun, Z.Y, Liu, J. and Chang, Y.Z. (2018), "Determination of equivalent blasting load considering millisecond delay effect", Geomech. Eng., 15(2), 745-754. https://doi.org/10.12989/gae.2018.15.2.745.
  53. Tripathy, G. and Gupta, I.D. (2002), "Prediction of ground vibrations due to construction blasts in different types of rock", Rock Mech. Rock Eng., 35(3), 195-204. https://doi.org/10.1007/s00603-001-0022-9.
  54. Uyar, G. G., Aksoy, C.O. and Kaypak, B. (2015), "Sev durayliligi acisindan kontrollu patlatma teknikleri", Proceedings of the International Mining Congress and Exhibition of Turkey, Antalya, Turkey, April.
  55. Uyar, G.G. and Babayigit, E. (2016), "Guided wave formation in coal mines and associated effects to buildings", Struct. Eng. Mech., 60(6), 923-937. https://doi.org/10.12989/sem.2016.60.6.923.
  56. Xue, X. and Yang, X. (2013), "Predicting blast-induced ground vibration using general regression neural network", J. Vib. Control, 20(10), 1512-1519. https://doi.org/10.1177%2F1077546312474680. https://doi.org/10.1177/1077546312474680

피인용 문헌

  1. Dynamic stability analysis of rock tunnels subjected to impact loading with varying UCS vol.24, pp.6, 2019, https://doi.org/10.12989/gae.2021.24.6.505
  2. Development of orthotropic Winkler-like model for rotating cylindrical shell: Stability analysis vol.26, pp.3, 2019, https://doi.org/10.12989/gae.2021.26.3.253