DOI QR코드

DOI QR Code

Investigation of design values computation of wood shear walls constructed with structural foam sheathing

  • Shadravan, Shideh (Department of Architecture, University of Oklahoma) ;
  • Ramseyer, Chris C. (Department of Civil Engineering and Environmental Science, University of Oklahoma)
  • 투고 : 2019.02.04
  • 심사 : 2019.02.25
  • 발행 : 2019.07.25

초록

This study investigated the ultimate lateral load capacity of shear walls constructed with several types of structural foam sheathing. Sixteen tests were conducted and the results were compared to the published design values commutated by the manufactures for each test series. The sheathing products included 12.7 mm (1/2 in) SI-Strong, 25.4 mm (1 in) SI-Strong, 12.7 mm (1/2 in) R-Max Thermasheath, and 2 mm (0.078 in) ThermoPly Green. The structural foam sheathing was attached per the manufacturers' specification to one side of the wood frame for each wall tested. Standard 12.7 mm (1/2 in) gypsum wallboard was screwed to the opposite side of the frame. Simpson HDQ8 tie-down anchors were screwed to the terminal studs at each end of the wall and anchored to the base of the testing apparatus. Both monotonic and cyclic testing following ASTM E564 and ASTM E2126, respectively, were considered. Results from the monotonic tests showed an 11 to 27 percent smaller capacity when compared to the published design values. Likewise, the test results from the cyclic tests showed a 24 to 45 percent smaller capacity than the published design values and did not meet the seismic performance design criteria computation.

키워드

참고문헌

  1. Ala-Risku, T. and Karkkainen, M. (2006), "Material delivery problems in construction projects: A possible solution", J. Product. Economics, 104(1), 19-29. https://doi.org/10.1016/j.ijpe.2004.12.027.
  2. ASCE 7 (2010), American Society of Civil Engineers (ASCE7-10), American Society of Civil Engineers, Virginia, USA.
  3. ASTM E2126 (2018), Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings, American Society for Testing and Materials, Pennsylvania, USA.
  4. ASTM E564 (2018), Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings, American Society for Testing and Materials, Pennsylvania, USA.
  5. Atherton, G.H. (1983), "Ultimate strength of particleboard diaphragms", Forest Products J., 33(5), 22-26.
  6. Casagrande, D., Rossi, S., Sartori, T. and Tomasi, R. (2016), "Proposal of an analytical procedure and a simplified numerical model for elastic response of single-storey timber shear-walls", Construct. Build. Mater., 102(2), 1101-1112. https://doi.org/10.1016/j.conbuildmat.2014.12.114.
  7. Chen, Z., Chui, Y.H, Doudak, G. and Nott, A. (2016), "Contribution of type-X gypsum wall board to the racking performance of light-fram wood shear walls", J. Struct. Eng., 142(5), https://doi.org/10.1061/(ASCE)ST.1943-541X.0001468.
  8. Christovasilis, I.P., Filiatrault, A. and Wanitkorkul, A. (2008), "Seismic testing of a full-scale wood structure on two shake tables", The 14th World Conference on Earth Engineering. China, October.
  9. Consortium of Universities for Research in Earthquake Engineering, (CUREE) (1999), Proceedings of the Invitational Workshop on Seismic Testing, Analysis and Design of Woodframe Construction, CUREE Publication No. W-01, Los Angeles, CA, March.
  10. Dinehart, D.W. and Shenton, H.W., III. (1998a), "Comparison of the response of timber shear walls with and without passive dampers", Proc. Structural Engineering Worldwide, Paper No. T207-5, Elsevier Science, New York.
  11. Dinehart, D. W. and Shenton, H. W., III. (1998b), "Comparison of static and dynamic response of timber shear walls", J. Struct. Eng., 124(6), 686-695. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:6(686).
  12. Dolan, J.D. and Madsen, B. (1992), ''Monotonic and cyclic tests of timber shear walls'', Canadian J. Civil Eng., 19(3), 115-422. https://doi.org/10.1139/l92-050.
  13. Durham, J., Lam and Helmut G.L. Prion, G.L. (2001), "Seismic resistance of wood shear walls with large OSB panels", J. Struct. Eng., 127(12), 1460-1466. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1460).
  14. Falk, R.H. and Itani, R.Y. (1987), "Dynamic characteristics of wood and gypsum diaphragms", J. Struct. Eng., 113(6), 1357-1370. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:6(1357).
  15. Filiatrault, A. (1990), "Analytical predictions of the seismic response of friction damped timber shear walls", Earthq. Eng. Struct. Dyn.,19, 259-273. https://doi.org/10.1002/eqe.4290190209.
  16. Folz, B. and Filiatrault, A. (2001), "Cyclic analysis of wood shear walls", J. Struct. Eng., 127(4), 433-441. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:4(433).
  17. Folz, B. and Filiatrault, A. (2004), "Seismic analysis of woodframe structures. I: Model formulation", J. Struct. Eng., 130(9). https://doi.org/10.1061/(ASCE)0733-9445(2004)130:9(1353).
  18. Gatto, K. and Uang C.M. (2002), "Effects of loading protocol on the cyclic response of woodframe shearwalls", J. Struct. Eng., 129(10). https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1384).
  19. Hamburger, R.O. and McCormick, D.L. (1997), "Earthquake performance of modern wood structureslessons from the 1994 northridge earthquake", Earthquake Performance and Safety of Timber Structures, Forest Products Society, Madison, Wisconsin, 77-82.
  20. He, M., Magnusson, H., Lam, F. and Prion, H.G.L. (1999), "Cyclic performance of perforated wood shearwalls with oversize OSB panels", J. Struct. Eng., ASCE, 125(1), 10-18. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(10).
  21. Huang, H., Wu, Y., Li, Z., Sun, Z. and Chen, Z. (2018), "Seismic behavior of Chuan-Dou type timber frames", J. Eng. Struct., Elsevier, 167, 725-739. https://doi.org/10.1016/j.engstruct.2017.10.072.
  22. IRC 2015 (2015), International Residential Code (IRC), International Code Council, New Jersey, USA.
  23. Kamiya, F., Sugimoto, K. and Mii, N. (1996), "Pseudo dynamic test of sheathed wood walls", Proc., Int. Wood Engineering Conf., 2, New Orleans, Louisiana, October, 187-194.
  24. Karacabeyli, E. and Ceccotti, A. (1996), ''Test results on the lateral resistance of nailed shear walls", Proceedings of the International Wood Engineering Conf., 2, New Orleans, Louisiana, October, 179-186.
  25. Lafontaine, A., Chen, Z., Doudak, G. and Ying He, C. (2017), "Lateral behavior of light wood-frame shear walls with gypsum wall board", American Soc. Civil Eng. J. Struct. Eng., 143(8). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001798.
  26. Lam, F., Prion, H.G. and He, M. (1997), "Lateral resistance of wood shear walls with large sheathing panels", J. Struct. Eng., 123(12), 1666-1673. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:12(1666).
  27. McMullin, K.M. and Merrick, D. (2002), Seismic Performance of Gypsum Walls: Experimental Test Program, CUREE Publication No. W-15, San Jose State University, San Jose, CA, USA.
  28. Memari, A.M. and Solnosky, R.L. (2014), "In-plane shear performance of wood-framed drywall sheathing wall systems under cyclic racking loading", Open J. Civil Eng., 4(1), 54-70. http://dx.doi.org/10.4236/ojce.2014.41006.
  29. NEES 2015 (2015), Network for Earthquake Engineering Simulation, Virginia, USA.
  30. Oliva, M.G. (1990), "Racking behavior of wood-framed gypsum panels under dynamic load", UCB/EERC-85/06; Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
  31. Pang, W.C., Rosowsky, D.V., Pei, S. and Van de Lindt (2007), "Evolutionary parameter hysteretic model for wood shear wall", J. Struct. Eng., ASCE, 137(8). https://doi.org/10.1061/(ASCE)0733-9445(2007)133:8(1118).
  32. Pang, W.C., Rosowsky, D.V., Pei, S. and Van de Lindt (2010), "Simplified direct displacement design of sixstory woodframe building and pretest seismic performance assessment", J. Struct. Eng., 136(7), 813-825. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000181
  33. Pardoen, G.C., Kazanjy, R.P., Freund, E., Hamilton, C.H., Larsen, D., Shah, N. and Smith, A. (2000), "Results from the city of Los Angeles - UC Irvine shear wall test program", Proc. World Conference on Timber Engineering. Paper 1.1.1, British Columbia, Canada, August.
  34. Patton-Mallory, M. and Wolfe, R. W. (1985), "Light-frame shear wall length and opening effects", J. Struct. Eng., 111(10), 2227-2239. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:10(2227).
  35. Pei, S. and Van de Lindt, J.W. (2011), "Seismic numerical modeling of a six-story light-frame wood building: Comparison with experiments", J. Earthq. Eng., 15(6), 924-941. https://doi.org/10.1080/13632469.2010.544840.
  36. Pei, S., Van de Lindt, J.W., Pryor, S.E., Shimizu, H., Isoda, H. and Rammer, D. (2010), "Seismic testing of a full-scale mid-rise building: The NEESWood Capstone Test", NEESWood Report No. 4. MCEER Earthquake Engineering to Extreme Events, University of Buffalo, NY, USA.
  37. Plesnik, T., Doudak, G. and Erochko, J. (2016), "Testing and analytical modelling of intermediate gypsum wallboard in wood shear wall sheathing to framing connections", Canadian J. Civil Eng., 43(11), 968-976. https://doi.org/10.1139/cjce-2015-0324.
  38. Rezazadah, S.M. (2016), "Shear wall sill plate behavior in wood frames", M.Sc. Dissertation, Ohio State University.
  39. Seaders, P., Gupta, R. and Miller, T.H. (2008), "Monotonic and cyclic load testing of partially and fully anchored wood-frame shear walls", Soc. Wood Sci. Tech., Wood and Fiber Science, 41(2), 145-156.
  40. Seible, F., Filiatrault, A. and Uang, C.M. (1999), "Recommended Research Plan for Element 1", Proceedings of the Invitational Workshop on Seismic Testing, Analysis and Design of Woodframe Construction, Los Angeles, CA, March.
  41. Shadravan, S. and Ramseyer, C.C. (2018), "Investigation of wood shear walls subjected to lateral load", Structures,16, 82-96. https://doi.org/10.1016/j.istruc.2018.08.007.
  42. Shipp, J. G., Erickson, T. W. and Rhodebeck, M. (2000), "Plywood shearwalls: Cyclic testing gives new design insight", Struct. Eng., July, 34-37.
  43. Sinha, A. and Gupta, R. (2009), "Strain distribution in OSB and GWB in wood-frame shear walls", J. Struct. Eng., 135(6), 667-675. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:6(666).
  44. Structural Foam Sheathings, OX Engineered Products INC., Northville, Michigan, USA.
  45. Tomasi, R. and Sartori, T. (2013), "Mechanical behaviour of connections between wood framed shear walls and foundations under monotonic and cyclic load", Construct. Build. Mater., 44, 682-690. https://doi.org/10.1016/j.conbuildmat.2013.02.055.
  46. Van de Lindt, J.W. (2004), "Evolution of wood shear wall testing, modeling, and reliability analysis: Bibliography", Practice Periodical Struct. Design Construct., 9(1), 44-53. https://doi.org/10.1061/(ASCE)1084-0680(2004)9:1(44).
  47. Van de Lindt, J.W., Huart, J.N. and Rosowsky, D.V. (2004), "Wood shearwall reliability inherent in AF&PA/ASCE 16", Structures Congress, May. https://doi.org/10.1061/40700(2004)59.
  48. Van de Lindt, J.W., Pei, S., Pryor, S.E., Rammer, D., Shimizu, H., Tachibana, K., Isoda, H. and Nakamura, I. (2010), "Experimental seismic response of a full-scale six-story wood apartment building", Proceedings of 11th World Conference on Timber Engineering 2010, WCTE 2010, Trentino, Italy, June.
  49. Wanyama, O.G., Sawata, K., Hirari, T., Koizumi, A. and Sasaki, Y. (2012), "Effective lateral resistance of timber-plywood-timber joints connected with nails", J. Wood Sci., 58(4), 315-321. https://doi.org/10.1007/s10086-012-1250-1.
  50. Wolf, R.W. (1983), "Contribution of gypsum wallboard to racking resistance of light-frame walls", FSRPFPL-439; U.S. Department of Agriculture, Madison, WI, USA.
  51. Zacher, E.G. (1999), "Gaps in information for determination of performance capabilities of light woodframe construction", Proceeding of the Invitational Workshop on Seismic Testing, Analysis and Design of Woodframe Construction, Los Angeles, CA, March.
  52. Zacher, E.G. and Gray, R.G. (1985), "Dynamic tests of wood framed shear walls", Proc., Structural Engineers Association of California 57th Annual Convention, San Diego, USA, October.
  53. Zheng, W., Lu, W., Liu, W., Wang, L. and Ling, Z. (2015), "Experimental investigation of laterally loaded double-shear-nail connections used in midply wood shear walls", Construct. Build. Mater., 101(1), 761-771. https://doi.org/10.1016/j.conbuildmat.2015.10.100.
  54. Zhou, N. and He, M. (2011), "Contribution of gypsum wallboard to lateral resistance capacity of wood shear wall", 2011 International Conference on Consumer Electronics, Communications and Networks. CECNet 2011 - Proceedings, Xianning, China, March, 3035-3039.