융합정보논문지 (Journal of Convergence for Information Technology)

중소기업융합학회 (Convergence Society for SMB)
권호 표지
DOI QR코드

DOI QR Code

구강양치용액이 복합레진의 색조 안정성과 표면미세경도 및 표면조도에 미치는 영향

The Effect of Oral Rinsing Solution on the Color Stability, Surface Microhardness and Surface Roughness Change of Composite Resin

  • 투고 : 2019.06.25
  • 심사 : 2019.07.20
  • 발행 : 2019.07.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 구강양치용액이 복합레진의 색조 안정성과 표면미세경도 및 표면조도에 미치는 영향에 대하여 알아보고자 하였으며, 실험실 연구로 Filtek P60과 Filtek Z250의 두 종류의 복합레진으로 시편을 제작하였다. 각 시편은 10개씩 8개 그룹으로 나누었다. 실험전 모든 시편을 colorimater를 이용하여 색조($L^*$, $a^*$, $b^*$)를 측정하였다. 대조군으로 증류수, 실험군으로 무색소, 녹색 및 보라색을 띄는 시판 구강양치용액을 사용하여 14일간 색변화, 표면미세경도, 표면조도 등을 측정하여 수집된 자료들 분석하였다. 녹색 및 보라색을 띄는 구강양치용액에서 눈에 띄는 색변화를 보였고, 모든 구강양치 용액군에서 표면미세경도는 감소하고 표면조도는 거칠어진 양상이 관찰되었다. 따라서 구강양치용액을 2주 이상 장기간 사용하게 되면 복합레진 표면에 변화를 야기할 수 있으므로, 안전한 사용을 위하여 짧은 기간 사용을 권장해야 할 것으로 사료된다.

This study aimed to evaluate the effects of oral rinsing solution on the color stability, surface microhardness and surface roughness change of composite resin. In this in-vitro study, 80 disc-shaped specimens were fabricated of Filtek P60 and Filtek Z250(A2 shade). The samples of each group were randomly divided into eight subgroups (n=10). The baseline color values ($L^*$, $a^*$, $b^*$) of each specimen were measured according to CIE LAB system using a colorimeter. After baseline color measurements, the control samples were immersed in distilled water and the test groups were immersed colorless, green and purple mouthrinses three times a day for thirty minutes. This process was repeated for two weeks. Green and purple oral rinsing solutions displayed color, microhardness and roughness change of all composite resin after immersion in the mouthrinses. Therefore, prescription of oral rinsing solution for a minimum of two weeks is a common practice, which may cause discoloration of aesthetic composite restorations of patients.

키워드

JKOHBZ_2019_v9n7_159_f0001.png 이미지

Fig. 1. Critical remarks of color differences (NBS unit)

Table 1. Composition of oral rinsing solution

JKOHBZ_2019_v9n7_159_t0001.png 이미지

Table 2. Composition of resin composite

JKOHBZ_2019_v9n7_159_t0002.png 이미지

Table 3. Critical marks of color change according to the NBS unit

JKOHBZ_2019_v9n7_159_t0003.png 이미지

Table 4. L*, a* and b* values after 14days

JKOHBZ_2019_v9n7_159_t0004.png 이미지

Table 5. Color change ΔE of during oral rinsing treatment

JKOHBZ_2019_v9n7_159_t0005.png 이미지

Table 6. Surface microhardness after 14 days

JKOHBZ_2019_v9n7_159_t0006.png 이미지

Table 7. Surface roughness after 14 days

JKOHBZ_2019_v9n7_159_t0007.png 이미지

참고문헌

  1. J. H. Bae, Y. K. Kim, P. Y. Yoo, M. A. Lee & B. H. Cho. (2007). Effect of a new resin monomer on the microleakage of composite resin restorations. Journal of Korea Academy Conservative Dentistry, 32(5), 468-474.
  2. S. Imamura, H. Takahashi & I. Hayakawa. (2008). Effect of filler type and polishing on the discoloration of composite resin artificial teeth. Dental Materials Journal, 27, 802-808. DOI : 10.4012/dmj.27.802
  3. H. Lu, L. B. Roeder, L. Lei & J. M. Powers. (2005). Effect of surface roughness on stain resistance of dental resin composites. Journal of Esthetic and Restorative Dentistry, 17, 102-109. DOI : 10.1111/j.1708-8240.2005.tb00094.x
  4. D. Dietschi, G. Campanile, J. Holz & J. M. Meyer. (1994). Comparison of the color stability of ten new generation composites: an in vitro study. Dental Materials, 10(6), 353-362. DOI : 10.1016/0109-5641(94)90059-0
  5. F. M. Mundim, F. Garcia Lda, D. R. Cruvinel, F. A. Lima, L. Bachmann & C. Pires-de-Souza Fde. (2011). Color stability, opacity and degree of conversion of preheated composites. Journal of Dentistry, 39, 25-29. DOI : 10.1016/j.jdent.2010.12.001
  6. D. Herrera, S. Roldan, I. Santacruz, S. Santos, M. Masdevall & M. Sanz. (2003). Differences in antimicrobial activity of four commercial 0.12% chlorhexidine mouthrinse formulations: an in vitro contact test and salivary bacterial counts study. Journal of Clinical Periodontology, 30, 307-314. DOI : 10.1034/j.1600-051X.2003.00341.x
  7. S. K. Filoche, K. Soma & C. H. Sissons. (2005). Antimicrobial effects of essential oils in combination with chlorhexidine digluconate. Oral Microbiology and Immunology, 20(4), 221-225. DOI : 10.1111/j.1399-302X.2005.00216.x
  8. I. A. Pretty, W. M. Edgar & S. M. High. (2003). The erosive potential of commercially available mouthrinses on enamel as measured by Quantitative Light-induced Fluorescence (QLF). Journal of Dentistry, 31(5), 313-319. DOI : 10.1016/S0300-5712(03)00067-8
  9. H. Pontefract, J. Hughes, K. Kemp, R. Yates, R. G. Newcombe & M. Addy. (2001). The erosive effect of some mouthrinses on enamel. A study on situ. Journal of Clinical Periodontology, 28(4), 319-324. DOI : 10.1034/j.1600-051x.2001.028004319.x
  10. K. H. Jeong, H. J. Lee & Y. N. Park. (2011). Erosive effect and color of mouthrinsing solutions on enamel surface. Journal of Dental Hygiene Science, 11(5), 397-404.
  11. S. C. Shin & H. Lee. (1998). Clinical study of mouth rinse containing sodium fluoride, cetylpyridinium chloride and urusodesoxycholinic acid on dental plaque and gingivitis. Journal of Korean Academy Oral Health, 22(2), 121-134.
  12. J. Moran, M. Addy & R. Newcombe. (1988). A clinical trial to assess the efficacy of sanguinarine-zinc mouthrinses compared with chlorhexidine mouthrinse. Journal of Clinical Periodontology, 15(10), 612-616. DOI : 10.1111/j.1600-051X.1988.tb02260.x
  13. R. R. Seghi, W. M. Johnston & W. J. O'Brien. (1986). Spectrophotometric analysis of color differences between porcelain system. Journal of Prosthetic Dentistry, 56(1), 35-40. DOI : 10.1016/0022-3913(86)90279-9
  14. M. Eldiwany & K. H. Fridel. (1995). Color stability of light cured and post cured composites. American Journal Dentistry, 8(4), 179-181.
  15. H. Adusumilli, J. S. Avula, P. Kakarla , S. Bandi, G. M. Mallela & K. Vallabhaneni. (2016). Color stability of esthetic restorative materials used in pediatric dentistry: An in vitro study. Journal of Indian Society of Pedodontics and Preventive Dentistry, 34(3), 233-237. DOI : 10.4103/0970-4388.186740
  16. C. Celik, B. Yuzugullu, S. Erkut & K. Yamanel. (2008). Effects of mouth rinses on color stability of resin composites. European Journal of Dentistry, 2(4), 247-253. https://doi.org/10.1055/s-0039-1697388
  17. M. Khosravi, B. Esmaeili, F. Nikzad & S. Khafri. (2016). Color stability of nanofilled and microhybrid resin-bases composities following exposure to chlorhexidine mouthrinses: An in vitro study. Journal of Dentistry of Tehran University of Medical Sciences, 13(2), 116-125.
  18. A. R. Baig, D. D. Shori, P. R. Shenoi, S. N. Ali, S. Shetti & A. Godhane. (2016). Mouthrinses affect color stability of composite. Journal of Conservative Dentistry, 19(4), 355-359. DOI : 10.4103/0972-0707.186448
  19. R. J. Shree Roja, Narayanan Sriman, V. Prabhakar, Koshy Minu, Anirudhan Subha & P. Ambalavanan. (2019). Comparative evaluation of color stability of three composite resins in mouthrinse: An in vitro study, Journal of Conservative Dentistry, 22(2), 175-180. DOI : 10.4103/JCD.JCD_241_18
  20. C. Hengtrakool, B. Kukiattrakoon & U. Kedjarune-Leggat. (2011). Effect of naturally acidic agents on microhardness and surface micromorphology of restorative materials. European Journal of Dentistry, 25(1), 89-100.
  21. N. Fatima, S. Y.Abidi, F. U. Qazi & S. A. Jat. (2013). Effect of different tetra pack juices on microhardness of direct tooth colored-restorative materials. The Saudi Dental Journal, 25(1), 29-32. DOI : 10.1016/j.sdentj.2012.09.002
  22. S. H. Sedighe, G. Maryam, M. Zhina & J. K. Mohammad. (2015). Comparison of the Effects of Two Different Drinks on Microhardness of a Silorane-based Composite Resin. Journal of Dentistry Shiraz University of Medical Sciences, 16(3), 260-266.
  23. B. Patel, N. Chhabra & D. Jain. (2016). Effect of different polishing systems on the surface roughness of nano-hybrid composites. Journal of Conservative Dentistry, 19(1), 37-40. DOI : 10.4103/0972-0707.173192
  24. S. B. Joniot, G. L. Gregoire, A. M. Auther & Y. M. Roques. (2000). Three-dimensional optical profilometry analysis of surface states obtained after finishing sequences for three composite resins. Operative Dentistry, 25(4), 311-315.
  25. R. P. Sousa, I. C. Zanin, J. P. Lima, S. M. Vasconcelos, M. A. Melo, H. C. Beltrao & L. K. Rodrigues. (2009). In situ effects of restorative materials on dental biofilm and enamel demineralisation. Journal of Dentistry, 37(1), 44-51. DOI : 10.1016/j.jdent.2008.08.009
  26. C. M. Bollen, P. Lambrechts & M. Quirynen. (1997). Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dental Materials, 13(4), 258-269. https://doi.org/10.1016/S0109-5641(97)80038-3
  27. I. M. Hamouda. (2011). Effects of various beverages on hardness, roughness, and solubility of esthetic restorative materials. Journal of Esthetic and Restorative Dentistry, 23(5), 315-322. DOI : 10.1111/j.1708-8240.2011.00453.x
  28. A. L. Briso, L. P. Caruzo, A. P. Guedes, A. Catelan & P. H. dos Santos. (2011). In vitro evaluation of surface roughness and microhardness of restorative materials submitted to erosive challenges. Operative Dentistry, 6(4), 397-402. DOI : 10.2341/10-356-L
  29. L. Han, A. Okamoto, M. Fukushima & T. Okiji. (2008). Evaluation of flowable resin composite surfaces eroded by acidic and alcoholic drinks. Dental Materials Journal, 27(3), 455-465. DOI : 10.4012/dmj.27.455