Steel and Composite Structures

  • 제32권2호
  • /
  • Pages.281-292
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The application of nonlocal elasticity to determine vibrational behavior of FG nanoplates

  • Fattahi, A.M. (Department of Mechanical Engineering, Tabriz Branch, Islamic Azad University) ;
  • Safaei, Babak (Department of Mechanical Engineering, Tsinghua University) ;
  • Moaddab, Elham (Seraj Institute of Higher Education)
  • 투고 : 2019.04.07
  • 심사 : 2019.06.13
  • 발행 : 2019.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Nonlocal elasticity and Reddy plant theory are used to study the vibration response of functionally graded (FG) nanoplates resting on two parameters elastic medium called Pasternak foundation. Nonlocal higher order theory accounts for the effects of both scale and the effect of transverse shear deformation, which becomes significant where stocky and short nanoplates are concerned. It is assumed that the properties of FG nanoplate follow a power law through the thickness. In addition, Poisson's ratio is assumed to be constant in this model. Both Winkler-type and Pasternak-type foundation models are employed to simulate the interaction of nanoplate with surrounding elastic medium. Using Hamilton's principle, size-dependent governing differential equations of motion and corresponding boundary conditions are derived. A differential quadrature approach is being utilized to discretize the model and obtain numerical solutions for various boundary conditions. The model is validated by comparing the results with other published results.

키워드

참고문헌

  1. Aghababaei, R. and Reddy, J.N. (2009), "Nonlocal third-order shear deformation plate theory with application to bending and vibration of plates", J. Sound Vib., 326(1), 277-289. https://doi.org/10.1016/j.jsv.2009.04.044
  2. Alizadeh, M. and Fattahi, A.M. (2019), "Non-classical plate model for FGMs", Eng. Comput., 35(1), 215-228. https://doi.org/10.1007/s00366-018-0594-6
  3. Aydogdu, M. (2009), "A general nonlocal beam theory: its application to nanobeam bending, buckling and vibration", Physica E: Low-dimens. Syst. Nanostruct., 41(9), 1651-1655. https://doi.org/10.1016/j.physe.2009.05.014
  4. Azizi, S., Safaei, B., Fattahi, A.M. and Tekere, M. (2015a), "Nonlinear vibrational analysis of nanobeams embedded in an elastic medium including surface stress effects", Adv. Mater. Sci. Eng., 2015, 1-7. http://dx.doi.org/10.1155/2015/318539
  5. Azizi, S., Fattahi, A.M. and Kahnamouei, J.T. (2015b), "Evaluating mechanical properties of nanoplatelet rein-forced composites under mechanical and thermal loads", Computat. Theor. Nanosci., 12, 4179-4185. https://doi.org/10.1166/jctn.2015.4334
  6. Damadam, M., Moheimani, R. and Dalir, H. (2018), "Bree's diagram of a functionally graded thick-walled cylinder under thermo-mechanical loading considering nonlinear kinematic hardening", J. Case Studies Thermal Eng., 12, 644-654. https://doi.org/10.1016/j.csite.2018.08.004
  7. Fleck, N.A. and Hutchinson, J.W. (1993), "A phenomenological theory for strain gradient effects in plasticity", J. Mech. Phys. Solids, 41(12), 1825-1857. https://doi.org/10.1016/0022-5096(93)90072-N
  8. Ghanati, P. and Safaei, B. (2019), "Elastic buckling analysis of polygonal thin sheets under compression", Indian J. Phys., 93, 47-52. https://doi.org/10.1007/s12648-018-1254-9
  9. Lam, D. (2003), "Experiments and theory in strain gradient elasticity", J. Mech. Phys. Solids, 51(8), 1477-1508. https://doi.org/10.1016/S0022-5096(03)00053-X
  10. Lian, P., Zhu, X., Liang, S., Li, Z., Yang, W. and Wang, H. (2010), "Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries", Electrochimica Acta, 55(12), 3909-3914. https://doi.org/10.1016/j.electacta.2010.02.025
  11. Fattahi, A.M. and Mondali, M. (2013), "Analytical study on elastic transition in short-fiber composites for plane strain case", J. Mech. Sci. Technol., 27(11), 3419-3425. https://doi.org/10.1007/s12206-013-0864-6
  12. Fattahi, A.M. and Mondali, M. (2014), "Theoretical study of stress transfer in platelet reinforced composites", J. Theor. Appl. Mech., 52, 3-14.
  13. Fattahi, A.M. and Safaei, B. (2017), "Buckling analysis of CNT-reinforced beams with arbitrary boundary conditions", Microsyst. Technol., 23(10), 5079-5091. https://doi.org/10.1007/s00542-017-3345-5
  14. Fattahi, A.M. and Sahmani, S. (2017a), "Nonlocal temperature-dependent postbuckling behavior of FG-CNT reinforced nanoshells under hydrostatic pressure combined with heat conduction", Microsyst. Technol., 23(10), 5121-5137. https://doi.org/10.1007/s00542-017-3377-x
  15. Fattahi, A.M. and Sahmani, S. (2017b), "Size dependency in the axial postbuckling behavior of nanopanels made of functionally graded material considering surface elasticity", Arab. J. Sci. Eng., 42(11), 4617-4633. https://doi.org/10.1007/s13369-017-2600-5
  16. Fattahi, A.M. and Sahmani, S. (2017c), "Size dependency in the axial postbuckling behavior of nanopanels made of functionally graded material considering surface elasticity", Arab. J. Sci. Eng., 42, 4617-4633. https://doi.org/10.1007/s13369-017-2600-5
  17. Jalali, M.H., Zargar, O. and Baghani, M. (2018), "Size-dependent vibration analysis of FG microbeams in thermal environment based on modified couple stress theory", Iran. J. Sci. Technol. Transact. Mech. Eng., 43(1), 761-771. https://doi.org/10.1007/s40997-018-0193-6
  18. Jung, W.Y. and Han, S.C. (2013), "Analysis of sigmoid functionally graded material (S-FGM) nanoscale plates using the nonlocal elasticity theory", Math. Probl. Eng., 2013, 10. http://dx.doi.org/10.1155/2013/476131
  19. Kong, S., Zhou, S., Nie, Z. and Wang, K. (2009), "Static and dynamic analysis of micro beams based on strain gradient elasticity theory", Int. J. Eng. Sci., 47(4), 487-498. https://doi.org/10.1016/j.ijengsci.2008.08.008
  20. Mohammadsalehi, M., Zargar, O. and Baghani, M. (2017), "Study of non-uniform viscoelastic nanoplates vibration based on nonlocal first-order shear deformation theory", Meccanica, 52(4-5), 1063-1077. https://doi.org/10.1007/s11012-016-0432-0
  21. Moheimani, R. and Ahmadian, M.T. (2012), "On Free Vibration of Functionally Graded Euler-Bernoulli Beam Models Based on the Non-Local Theory", ASME 2012 International Mechanical Engineering Congress and Exposition, 12, Vibration Acoustics and Wave Propagation. https://doi.org/10.1115/IMECE2012-86107
  22. Moradi-Dastjerdi, R. and Payganeh, G. (2017a), "Thermoelastic dynamic analysis of wavy carbon nanotube reinforced cylinders under thermal loads", Steel Compos. Struct., Int. J., 25(3), 315-326. https://doi.org/10.12989/scs.2017.25.3.315
  23. Moradi-Dastjerdi, R. and Payganeh, G. (2017b), "Transient heat transfer analysis of functionally graded CNT reinforced cylinders with various boundary conditions", Steel Compos. Struct., Int. J., 24(3), 359-367. https://doi.org/10.12989/scs.2017.24.3.359
  24. Moradi-Dastjerdi, R., Payganeh, G. and Tajdari, M. (2017), "Resonance in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube", Polym. Compos., 38, E542-E552. https://doi.org/10.1002/pc.24045
  25. Moradi-Dastjerdi, R., Payganeh, G. and Tajdari, M. (2018), "Thermoelastic Analysis of functionally graded cylinders reinforced by wavy CNT using a mesh-free method", Polym. Compos., 39(7), 2190-2201. https://doi.org/10.1002/pc.24183
  26. Pasharavesh, A., Vaghasloo, Y.A., Ahmadian, M.T. and Moheimani, R. (2011), "Nonlinear vibration analysis of nano to micron scale beams under electric force using nonlocal theory", ASME Conference Proceedings, DETC2011-47615, pp. 145-151.
  27. Peddieson, J., Buchanan, G.R. and McNitt, R.P. (2003), "Application of nonlocal continuum models to nanotechnology", Int. J. Eng. Sci., 41(3), 305-312. https://doi.org/10.1016/S0020-7225(02)00210-0
  28. Pourasghar, A. and Chen, Z. (2018), "Hyperbolic heat conduction and thermoelastic solution of functionally graded CNT reinforced cylindrical panel subjected to heat pulse", Int. J. Solids Struct., 163, 117-129. https://doi.org/10.1016/j.ijsolstr.2018.12.030
  29. Pourasghar, A. and Chen, Z. (2019), "Effect of hyperbolic heat conduction on the linear and nonlinear vibration of CNT reinforced size-dependent functionally graded microbeams", Int. J. Eng. Sci., 137, 57-72. https://doi.org/10.1016/j.ijengsci.2019.02.002
  30. Pourasghar, A. and Kamarian, S. (2013), "Three-dimensional solution for the vibration analysis of functionally graded multiwalled carbon nanotubes/phenolic nanocomposite cylindrical panels on elastic foundation", Polym. Compos., 34(12), 2040-2048. https://doi.org/10.1002/pc.22612
  31. Pourasghar, A. and Kamarian, S. (2015), "Dynamic stability analysis of functionally graded nanocomposite non-uniform column reinforced by carbon nanotube", J. Vib. Control, 21(13), 2499-2508. https://doi.org/10.1177/1077546313513625
  32. Pourasghar, A., Homauni, M. and Kamarian, S. (2015), "Differential quadrature based nonlocal flapwise bending vibration analysis of rotating nanobeam using the eringen nonlocal elasticity teory under axial load", Polym. Compos., 37(11), 3175-3180. https://doi.org/10.1002/pc.23515
  33. Pourasghar, A., Moradi-Dastjerdi, R., Yas, M.H., Ghorbanpour Arani, A. and Kamarian, S. (2018), "Three-Dimensional analysis of carbon nanotube- reinforced cylindrical shells with temperature- dependent properties under thermal environment", Polym. Compos., 39(4), 1161-1171. https://doi.org/10.1002/pc.24046
  34. Pradhan, S.C. and Murmu, T. (2009), "Small scale effect on the buckling of single-layered graphene sheets under biaxial compression via nonlocal continuum mechanics", Computat. Mater. Sci., 47(1), 268-274. https://doi.org/10.1016/j.commatsci.2009.08.001
  35. Qin, Z., Chu, F. and Zu, J. (2017), "Free vibrations of cylindrical shells with arbitrary boundary conditions: A comparison study", Int. J. Mech. Sci., 133, 91-99. https://doi.org/10.1016/j.ijmecsci.2017.08.012
  36. Qin, Z., Yang, Z., Zu, J. and Chu, F. (2018), "Free vibration analysis of rotating cylindrical shells coupled with moderately thick annular plates", Int. J. Mech. Sci., 142-143, 127-139. https://doi.org/10.1016/j.ijmecsci.2018.04.044
  37. Qin, Z., Pang, X., Safaei, B. and Chu, F. (2019), "Free vibration analysis of rotating functionally graded CNT reinforced composite cylindrical shells with arbitrary boundary conditions", Compos. Struct., 220, 847-860. https://doi.org/10.1016/j.compstruct.2019.04.046
  38. Reddy, J. (2010), "Nonlocal nonlinear formulations for bending of classical and shear deformation theories of beams and plates", Int. J. Eng. Sci., 48(11), 1507-1518. https://doi.org/10.1016/j.ijengsci.2010.09.020
  39. Reddy, J.N. and Pang, S.D. (2008), "Nonlocal continuum theories of beams for the analysis of carbon nanotubes", J. Appl. Phys., 103(2), 023511-023516. https://doi.org/10.1063/1.2833431
  40. Roque, C.M.C., Ferreira, A.J.M. and Reddy, J.N. (2011), "Analysis of timoshenko nanobeams with a nonlocal formulation and meshless method", Int. J. Eng. Sci., 49(9), 976-984. https://doi.org/10.1016/j.ijengsci.2011.05.010
  41. Safaei, B. and Fattahi, A.M. (2017), "Free vibrational response of single-layered graphene sheets embedded in an elastic matrix using different nonlocal plate models", MECHANIKA, 23, 678-687. https://doi.org/10.5755/j01.mech.23.5.14883
  42. Safaei, B., Moradi-Dastjerdi, R. and Chu, F. (2017), "Effect of thermal gradient load on thermo-elastic vibrational behavior of sandwich plates reinforced by carbon nanotube agglomerations", Compos. Struct.res, 192, 28-37. https://doi.org/10.1016/j.compstruct.2018.02.022
  43. Safaei, B., Fattahi, A.M. and Chu, F. (2018), "Finite element study on elastic transition in platelet reinforced composites", Microsyst. Technol., 24(6), 2663-2671. https://doi.org/10.1007/s00542-017-3651-y
  44. Safaei, B., Moradi-Dastjerdi, R., Qin, Z. and Chu, F. (2019), "Frequency-dependent forced vibration analysis of nanocomposite sandwich plate under thermo-mechanical loads", Compos. Part B: Eng., 161, 44-54. https://doi.org/10.1016/j.compositesb.2018.10.049
  45. Shahriari, B., Zargar, O., Baghani, M. and Baniassadi, M. (2018), "Free vibration analysis of rotating functionally graded annular disc of variable thickness using generalized differential quadrature method", Scientia Iranica, 25(2), 728-740. https://doi.org/10.24200/SCI.2017.4325
  46. Sahmani, S. and Fattahi, A.M. (2016), "Size-dependent non-linear instability of shear deformable cylindrical nano-panels subjected to axial compression in thermal environments", Microsyst. Technol., 23(10), 4717-4731. https://doi.org/10.1007/s00542-017-3345-5
  47. Sahmani, S. and Fattahi, A.M. (2017a), "Calibration of developed nonlocal anisotropic shear deformable plate model for uniaxial instability of 3D metallic carbon nanosheets using MD simulations", Comput. Methods Appl. Mech. Eng., 322, 187-207. https://doi.org/10.1016/j.cma.2017.04.015
  48. Sahmani, S. and Fattahi, A.M. (2017b), "Development an efficient calibrated nonlocal plate model for nonlinear axial instability of zirconia nanosheets using molecular dynamics simulation", J. Molecul. Graphics Model., 75, 20-31. https://doi.org/10.1016/j.jmgm.2017.04.018
  49. Wang, Q. and Liew, K.M. (2007), "Application of nonlocal continuum mechanics to static analysis of micro-and nanostructures", Phys. Lett. A, 363(3), 236-242. https://doi.org/10.1016/j.physleta.2006.10.093
  50. Wang, K.F. and Wang, B.L. (2011), "Vibration of nanoscale plates with surface energy via nonlocal elasticity", Physica E: Low-dimens. Syst. Nanostruct., 44(2), 448-453. https://doi.org/10.1016/j.physe.2011.09.019
  51. Wang, B., Zhao, J. and Zhou, S. (2010), "A micro scale Timoshenko beam model based on strain gradient elasticity theory", Eur. J. Mech.-A/Solids, 29(4), 591-599. https://doi.org/10.1016/j.euromechsol.2009.12.005
  52. Xia, Y. and Yang, P. (2003), "Guest editorial: chemistry and physics of nanowires", Adv. Mater., 15(5), 351-352. https://doi.org/10.1002/adma.200390086

피인용 문헌

  1. Experimental and numerical study on HDPE/SWCNT nanocomposite elastic properties considering the processing techniques effect vol.26, pp.8, 2019, https://doi.org/10.1007/s00542-020-04784-y
  2. Influence of Variable Nonlocal Parameter and Porosity on the Free Vibration Behavior of Functionally Graded Nanoplates vol.2021, 2019, https://doi.org/10.1155/2021/1219429
  3. Experimental studies on elastic properties of high density polyethylene-multi walled carbon nanotube nanocomposites vol.38, pp.2, 2019, https://doi.org/10.12989/scs.2021.38.2.177
  4. On the mechanics of nanocomposites reinforced by wavy/defected/aggregated nanotubes vol.38, pp.5, 2019, https://doi.org/10.12989/scs.2021.38.5.533
  5. Elastic wave phenomenon of nanobeams including thickness stretching effect vol.10, pp.3, 2019, https://doi.org/10.12989/anr.2021.10.3.271
  6. Calcium carbonate nanoparticles effects on cement plast properties vol.27, pp.8, 2021, https://doi.org/10.1007/s00542-020-05136-6
  7. Dispersion of waves characteristics of laminated composite nanoplate vol.40, pp.3, 2019, https://doi.org/10.12989/scs.2021.40.3.355
  8. Vibration characteristics of microplates with GNPs-reinforced epoxy core bonded to piezoelectric-reinforced CNTs patches vol.11, pp.2, 2019, https://doi.org/10.12989/anr.2021.11.2.115