DOI QR코드

DOI QR Code

Probabilistic seismic risk assessment of simply supported steel railway bridges

  • Yilmaz, Mehmet F. (Department of Civil Engineering, Ondokuz Mayis University) ;
  • Caglayan, Barlas O. (Department of Civil Engineering, Istanbul Technical University) ;
  • Ozakgul, Kadir (Department of Civil Engineering, Istanbul Technical University)
  • 투고 : 2018.06.11
  • 심사 : 2019.05.17
  • 발행 : 2019.07.25

초록

Fragility analysis is an effective tool that is frequently used for seismic risk assessment of bridges. There are three different approaches to derive a fragility curve: experimental, empirical and analytical. Both experimental and empirical methods to derive fragility curve are based on past earthquake reports and expert opinions which are not suitable for all bridges. Therefore, analytical fragility analysis becomes important. Nonlinear time history analysis is commonly used which is the most reliable method for determining probabilistic demand models. In this study, to determine the probabilistic demand models of bridges, time history analyses were performed considering both material and geometrical nonlinearities. Serviceability limit states for three different service velocities were considered as a performance goal. Also, support displacements, component yielding and collapse limits were taken into account. Both serviceability and component fragility were derived by using maximum likely hood methods. Finally, the seismic performance and critical members of the bridge were probabilistically determined and clearly presented.

키워드

과제정보

연구 과제 주관 기관 : TCDD, TUBITAK

참고문헌

  1. Baker, J.W. (2015), "Efficient analytical fragility function fitting using dynamic structural analysis", Earthq. Spectra, 31(1), 579-599. https://doi.org/10.1193/021113EQS025M.
  2. Banerjee, S. and Shinozuka, M. (2007), "Nonlinear static procedure for seismic vulnerability assessment of bridges", Comput. Aid. Civil Infrastr. Eng., 22(4), 293-305. https://doi.org/10.1111/j.1467-8667.2007.00486.x.
  3. Bignell, J.L., LaFave, J.M., Wilkey Joseph P. and Hawkins, N. M. (2004), "Seismic evaluation of vulnerable highway bridges with wall piers on emergency routes in Southern Illinois", 13 the World Conference on Earthquake Engineering, Van-Couver, BC, Canada, August.
  4. Bruneau, M., Wilson, J.C. and Tremblay, R. (1996), "Performance of steel bridges during the 1995 Hyogo-ken Nanbu (Kobe, Japan) earthquake", Can. J. Civil Eng., 23, 678-713. https://doi.org/10.1139/l2012-045.
  5. Byers, W.G. (2004), "Railroad lifeline damage in earthquakes", 13 the World Conference on Earthquake Engineering, Vancouver, BC, Canada, August
  6. EN1990-prANNEX A2 : Application for Bridges (2001), EN 1990-Eurocode: Basis of Structural Design Annex2: Application for Bridges Design.
  7. Kawashima, K. (2012), "Damage of bridges due to the 2011 great east Japan earthquake", J. JPN Assoc. Earthq. Eng., 12(4), 319-338. https://doi.org/10.5610/jaee.12.4_319.
  8. Kumar, R. and Gardoni, P. (2014), "Effect of seismic degradation on the fragility of reinforced concrete bridges", Eng. Struct., 79, 267-275. https://doi.org/10.1016/j.engstruct.2014.08.019.
  9. Larsson, T. and Lagerqvist, O. (2009), "Material properties of old steel bridges", Nordic Steel Construction Conference 2009, http://www.nordicsteel2009.se/pdf/888.pdf (last access: January 2018).
  10. Lindfeldt, A. (2015), "Railway capacity analysis", KTH Royal Institute of Technology School of Architecture and the Built Environment Department of Trasport Science.
  11. Liu, Y., Paolacci, F. and Lu, D.G. (2017) "Seismic fragility of a typical bridge using extrapolated experimental damage limit states" Earthq. Struct., 13(6), 599-611. https://doi.org/10.12989/eas.2017.13.6.599.
  12. Mackie, K. and Stojadinovic, B. (2001), "Probabilistic seismic demand model for California highway bridges", J. Bridge Eng., 6, 468-481. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(468).
  13. Mander, J., Kim, D., Chen, S. and Premus, G. (1996), "Response of steel bridge bearings to the reversed cyclic loading", Technical Report NCEER 96-0014, Buffalo, NY.
  14. Mander, J.B. (1999), "Fragility curve development for assessing the seismic vulnerability of highway bridges", Available at: http://mceer-nt4.mceer.buffalo.edu/publications/resaccom/99-SP01/Ch10mand.pdf.
  15. Mohseni, M. (2012), "Dynamic vulnerability assessment of highway and railway bridges", Ph.D. Teises, University of Nebraska-Lincoln.
  16. Mosleh, A., Razzaghi, M.S., Jara, J. and Varum, H. (2016), "Development of fragility curves for RC bridges subjected to reverse and strike-slip seismic sources", Earthq. Struct., 11(3), 517-538. http://dx.doi.org/10.12989/eas.2016.11.3.517.
  17. Nielson, B.G. (2005), "Analytical fragility curves for highway bridges in moderate seismic zones", available at: http://smartech.gatech.edu/handle/1853/7542.
  18. Nielson, B.G. and DesRoches, R. (2007), "Seismic fragility methodology for highway bridges using a component level approach", Earthq. Eng. Struct. Dyn., 36(6), 823-839. https://doi.org/10.1002/eqe.655.
  19. Padgett, J.E. and DesRoches, R. (2008), "Methodology for the development of analytical fragility curves for retrofitted bridges", Earthq. Eng. Struct. Dyn., 37(8), 1157-1174. https://doi.org/10.1002/eqe.801.
  20. Pan, Y., Agrawal, A.K. and Ghosn, M. (2007), "Seismic fragility of continuous steel highway bridges in New York state", J. Bridge Eng., 12(6), 689-699. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:6(689).
  21. Razzaghi, M.S., Safarkhanlou, M., Mosleh, A. and Hosseini, P. (2018), "Fragility assessment of RC bridges using numerical analysis and artificial neural networks", Earthq. Struct., 15(4), 431-441. https://doi.org/10.12989/eas.2018.15.4.431.
  22. Sfahani, M.G. and Guan, H. (2018), "An extended cloud analysis method for seismic fragility assessment of highway bridges", Earthq. Struct., 15(6), 605-616. https://doi.org/10.12989/eas.2018.15.6.605.
  23. Shah, P.M., Stewart, M. and Fok, H. (2009), "Reliability assessment of a typical steel truss bridge", 7th Austroads Bridge Conference, Auckland, New Zealand, May.
  24. Shinozuka, M., Feng, M.Q., Kim, H. and Kim, S. (2000a), "Nonlinear static procedure for fragility curve development", J. Eng. Mech., 126, 1287-1295. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1287).
  25. Shinozuka, M., Freg, M.Q., Lee, J. and Naganuma, T. (2000b), "Statistical analysis of fragility curves", J. Eng. Mech., 126, 1224-1231. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1224).
  26. Siqueira, G.H., Sanda, A.S., Paultre, P. and Padgett, J.E. (2014), "Fragility curves for isolated bridges in eastern Canada using experimental results", Eng. Struct., 74, 311-324. https://doi.org/10.1016/j.engstruct.2014.04.053.
  27. Sisi, A.A., Erberik, M.A. and Askan, A. (2018), "The effect of structural variability and local site conditions on building fragility functions", Earthq. Struct., 14(4), 285-295. https://doi.org/10.12989/eas.2018.14.4.285.
  28. Tsionis, G. and Fardis, M.N. (2014), Fragility Functions of Road and Railway Bridges Chapter 9.
  29. Vamvatsikos, D. and Allin Cornell, C. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  30. Yazgan, U. (2015), "Empirical seismic fragility assessment with explicit modeling of spatial ground motion variability", Eng. Struct., 100, 479-489. https://doi.org/10.1016/j.engstruct.2015.06.027.
  31. Yilmaz, M.F. and Caglayan, B.O. (2018), "Seismic assessment of a multi-span steel railway bridge in Turkey based on nonlinear time history", Nat. Hazard. Earth Syst. Sci., 18(1), 231-240. https://doi.org/10.5194/nhess-18-231-2018.

피인용 문헌

  1. Response modification factor and seismic fragility assessment of skewed multi-span continuous concrete girder bridges vol.20, pp.4, 2021, https://doi.org/10.12989/eas.2021.20.4.389