DOI QR코드

DOI QR Code

Mechanical performance of fiber-reinforced recycled refractory brick concrete exposed to elevated temperatures

  • 투고 : 2019.01.22
  • 심사 : 2019.04.30
  • 발행 : 2019.07.25

초록

In this paper, the effect of the type and amount of fibers on the physicomechanical properties of concrete containing fine recycled refractory brick (RRB) and natural aggregate subjected to elevated temperatures was investigated. For this purpose, forta-ferro (FF), polypropylene (PP), and polyvinyl alcohol (PVA) fibers with the volume fractions of 0, 0.25, and 0.5%, as well as steel fibers with the volume fractions of 0, 0.75, and 1.5% were used in the concrete containing RRB fine aggregate replacing natural sand by 0 and 100%. In total, 162 concrete specimens from 18 different mix designs were prepared and tested in the temperature groups of 23, 400, and $800^{\circ}C$. After experiencing heat, the concrete properties including the compressive strength, ultrasonic pulse velocity (UPV), weight loss, and surface appearance were evaluated and compared with the corresponding results of the reference (unheated) specimens. The results show that using RRB fine aggregate replacing natural fine aggregate by 100% led to an increase in the concrete compressive strength in almost all the mixes, and only in the PVA-containing mixes a decrease in strength was observed. Furthermore, UPV values at $800^{\circ}C$ for all the concrete mixes containing RRB fine aggregate were above those of the natural aggregate concrete specimens. Finally, regarding the compressive strength and UPV results, steel fibers demonstrated a better performance relative to other fiber types.

키워드

참고문헌

  1. ACI 228.2R-98 (2004), Nondestructive Test Methods for Evaluation of Concrete in Structures, American Concrete Institute, Farmington Hills, MI.
  2. ACI Committee 216 (1989), Guide for Determining the Fire Endurance of Concrete Elements (ACI 216R-89), American Concrete Institute, Detroit.
  3. Afroughsabet, V., Biolzi, L. and Ozbakkaloglu, T. (2016), "Highperformance fiber-reinforced concrete: a review", J. Mater. Sci., 51(14), 6517-6551. https://doi.org/10.1007/s10853-016-9917-4.
  4. Albano, C., Camacho, N., Hernandez, M., Matheus, A. and Gutierrez, A. (2009), "Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios", Waste Manage., 29(10), 2707-2716. https://doi.org/10.1016/j.wasman.2009.05.007.
  5. Aliabdo, A.A., Abd-Elmoaty, A.E.M. and Hassan, H.H. (2014), "Utilization of crushed clay brick in concrete industry", Alex. Eng. J., 53(1), 151-168. https://doi.org/10.1016/j.aej.2013.12.003.
  6. Arioz, O. (2007), "Effects of elevated temperatures on properties of concrete", Fire Saf. J., 42(8), 516-522. https://doi.org/10.1016/j.firesaf.2007.01.003.
  7. ASTM C143/C143M (2003), Standard Test Method for Slump of Hydraulic-Cement Concrete, Annual Book of ASTM Standard 04.
  8. ASTM C150 (2003), Standard Specification for Portland Cement, Annual Book of ASTM Standard 04.
  9. ASTM C192/C192M (2002), Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, Annual Book of ASTM Standard 04.
  10. ASTM C33 (2003), Standard Specification for Concrete Aggregates, Annual book of ASTM standard 04.
  11. ASTM C494 (2016), Standard Specification for Chemical Admixtures for Concrete, American Society for Testing and Materials International, United States.
  12. ASTM C597 (2016), Standard Test Method for Pulse Velocity Through Concrete, American Society for Testing Materials International, United States.
  13. Banthia, N. and Gupta, R. (2004), "Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices", Mater. Struct., 37(10), 707-716. https://doi.org/10.1007/BF02480516.
  14. Baradaran-Nasiri, A. and Nematzadeh, M. (2017), "The effect of elevated temperatures on the mechanical properties of concrete with fine recycled refractory brick aggregate and aluminate cement", Constr. Build. Mater., 147, 865-875. https://doi.org/10.1016/j.conbuildmat.2017.04.138.
  15. BS 1881-116 (1983), Testing Concretes, Method for Determination of Compressive Strength of Concrete Cubes.
  16. Buratti, N., Mazzotti, C. and Savoia, M. (2011), "Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes", Constr. Build. Mater., 25(5), 2713-2722. https://doi.org/10.1016/j.conbuildmat.2010.12.022.
  17. Chen, G.M., He, Y.H., Yang, H., Chen, J.F. and Guo, Y.C. (2014), "Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures", Constr. Build. Mater., 71, 1-15. https://doi.org/10.1016/j.conbuildmat.2014.08.012.
  18. Choumanidis, D., Badogiannis, E., Nomikos, P. and Sofianos, A. (2016), "The effect of different fibres on the flexural behaviour of concrete exposed to normal and elevated temperatures", Constr. Build. Mater., 129, 266-277. https://doi.org/10.1016/j.conbuildmat.2016.10.089.
  19. Cree, D., Green, M. and Noumowe, A. (2013), "Residual strength of concrete containing recycled materials after exposure to fire: a review", Constr. Build. Mater., 45, 208-223. https://doi.org/10.1016/j.conbuildmat.2013.04.005.
  20. Domski, J., Katzer, J., Zakrzewski, M. and Ponikiewski, T. (2017), "Comparison of the mechanical characteristics of engineered and waste steel fiber used as reinforcement for concrete", J. Clean. Prod., 158, 18-28. https://doi.org/10.1016/j.jclepro.2017.04.165.
  21. Eurocode 4 (2004), EN 1994-1-2:2004, Design of Composite Steel and Concrete Structures-Part 1-2: General Rules for Structural Fire Design.
  22. Ghahremannejad, M., Mahdavi, M., Saleh, A.E., Abhaee, S. and Abolmaali, A. (2018), "Experimental investigation and identification of single and multiple cracks in synthetic fiber concrete beams", Case Stud. Constr. Mater., 9, e00182. https://doi.org/10.1016/j.cscm.2018.e00182.
  23. Grunewald, S. and Walraven, J.C. (2001), "Parameter-study on the influence of steel fibers and coarse aggregate content on the fresh properties of self-compacting concrete", Cement Concrete Res., 31(12), 1793-1798. https://doi.org/10.1016/S0008-8846(01)00555-5.
  24. Gul, R., Demirboga, R. and Guvercin, T. (2006), "Compressive strength and ultrasound pulse velocity of mineral admixtured mortars", IJEMS, 13(1).
  25. Guneyisi, E., Gesoglu, M., Ozturan, T. and Ipek, S. (2015), "Fracture behavior and mechanical properties of concrete with artificial lightweight aggregate and steel fiber", Constr. Build. Mater., 84, 156-168. https://doi.org/10.1016/j.conbuildmat.2015.03.054.
  26. Halicka, A., Ogrodnik, P. and Zegardlo, B. (2013), "Using ceramic sanitary ware waste as concrete aggregate", Constr. Build. Mater., 48, 295-305. https://doi.org/10.1016/j.conbuildmat.2013.06.063.
  27. Hansen, T.C. (2004), Recycling of Demolished Concrete and Masonry, CRC Press.
  28. Hsie, M., Tu, C. and Song, P. S. (2008), "Mechanical properties of polypropylene hybrid fiber-reinforced concrete", Mater. Sci. Eng.: A, 494(1), 153-157. https://doi.org/10.1016/j.msea.2008.05.037.
  29. IS 13311-1 (1992), Non-Destructive Testing of Concrete-Methods of Tests, Bureau of Indian Standard, New Delhi, India.
  30. Khalaf, F.M. and DeVenny, A.S. (2004), "Recycling of demolished masonry rubble as coarse aggregate in concrete", J. Mater. Civil Eng., 16(4), 331-340. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:4(331).
  31. Khalaf, F.M. and DeVenny, A.S. (2005), "Properties of new and recycled clay brick aggregates for use in concrete", J. Mater. Civil Eng., 17(4), 456-464. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:4(456).
  32. Li, X., Bao, Y., Wu, L., Yan, Q., Ma, H., Chen, G. and Zhang, H. (2017b), "Thermal and mechanical properties of highperformance fiber-reinforced cementitious composites after exposure to high temperatures", Constr. Build. Mater., 157, 829-838. https://doi.org/10.1016/j.conbuildmat.2017.09.125.
  33. Li, X., Bao, Y., Xue, N. and Chen, G. (2017a), "Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures", Fire Saf. J., 92, 98-106. https://doi.org/10.1016/j.firesaf.2017.06.006.
  34. Liu, Y., Wang, W., Chen, Y.F. and Ji, H. (2016), "Residual stressstrain relationship for thermal insulation concrete with recycled aggregate after high temperature exposure", Constr. Build. Mater., 129, 37-47. https://doi.org/10.1016/j.conbuildmat.2016.11.006.
  35. Meng, W. and Khayat, K.H. (2018), "Effect of hybrid fibers on fresh properties, mechanical properties, and autogenous shrinkage of cost-effective UHPC", J. Mater. Civil Eng., 30(4), 04018030. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002212.
  36. Mohammadhosseini, H. and Yatim, J. M. (2017), "Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures", J. Clean. Prod., 144, 8-21. https://doi.org/10.1016/j.jclepro.2016.12.168.
  37. Mohammadhosseini, H., Lim, N.H.A.S., Sam, A.R.M. and Samadi, M. (2018), "Effects of elevated temperatures on residual properties of concrete reinforced with waste polypropylene carpet fibres", Arab. J. Sci. Eng., 43(4), 1673-1686. https://doi.org/10.1007/s13369-017-2681-1.
  38. Nematzadeh, M. and Baradaran-Nasiri, A. (2018), "Residual properties of concrete containing recycled refractory brick aggregate at elevated temperatures", J. Mater. Civil Eng., 30(1), 04017255. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002125.
  39. Nematzadeh, M. and Fallah-Valukolaee, S. (2017a), "Effectiveness of fibers and binders in high-strength concrete under chemical corrosion", Struct. Eng. Mech., 64(2), 243-257. https://doi.org/10.12989/sem.2017.64.2.243.
  40. Nematzadeh, M. and Fallah-Valukolaee, S. (2017b), "Erosion resistance of high-strength concrete containing forta-ferro fibers against sulfuric acid attack with an optimum design", Constr. Build. Mater., 154, 675-686. https://doi.org/10.1016/j.conbuildmat.2017.07.180.
  41. Nematzadeh, M. and Hasan-Nattaj, F. (2017), "Compressive stress-strain model for high-strength concrete reinforced with Forta-Ferro and steel fibers", J. Mater. Civil Eng., 29(10), 04017152. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001990.
  42. Nematzadeh, M. and Poorhosein, R. (2017), "Estimating properties of reactive powder concrete containing hybrid fibers using UPV", Comput. Concrete, 20(4), 491-502. https://doi.org/10.12989/cac.2017.20.4.491.
  43. Nik, A.S. and Omran, O.L. (2013), "Estimation of compressive strength of self-compacted concrete with fibers consisting nano-SiO 2 using ultrasonic pulse velocity", Constr. Build. Mater., 44, 654-662. https://doi.org/10.1016/j.conbuildmat.2013.03.082.
  44. Peng, G.F., Yang, W.W., Zhao, J., Liu, Y.F., Bian, S.H. and Zhao, L.H. (2006), "Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures", Cement Concrete Res., 36(4), 723-727. https://doi.org/10.1016/j.cemconres.2005.12.014.
  45. Poorhosein, R. and Nematzadeh, M. (2018), "Mechanical behavior of hybrid steel-PVA fibers reinforced reactive powder concrete", Comput. Concrete, 21(2), 167-179. https://doi.org/10.12989/cac.2018.21.2.167.
  46. Qian, C.X. and Stroeven, P. (2000), "Development of hybrid polypropylene-steel fibre-reinforced concrete", Cement Concrete Res., 30(1), 63-69. https://doi.org/10.1016/S0008-8846(99)00202-1.
  47. Sagoe-Crentsil, K.K., Brown, T. and Taylor, A.H. (2001), "Performance of concrete made with commercially produced coarse recycled concrete aggregate", Cement Concrete Res., 31(5), 707-712. https://doi.org/10.1016/S0008-8846(00)00476-2.
  48. Sarhat, S.R. and Sherwood, E.G. (2012), "Residual mechanical response of recycled aggregate concrete after exposure to elevated temperatures", J. Mater. Civil Eng., 25(11), 1721-1730. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000719.
  49. Soroushian, P. and Bayasi, Z. (1991), "Fiber type effects on the performance of steel fiber reinforced concrete", Mater. J., 88(2), 129-134.
  50. Wijayasundara, M., Mendis, P. and Crawford, R H. (2018), "Integrated assessment of the use of recycled concrete aggregate replacing natural aggregate in structural concrete", J. Clean. Prod., 174, 591-604. https://doi.org/10.1016/j.jclepro.2017.10.301
  51. Xiao, J., Li, J. and Zhang, C. (2005), "Mechanical properties of recycled aggregate concrete under uniaxial loading", Cement Concrete Res., 35(6), 1187-1194. https://doi.org/10.1016/j.cemconres.2004.09.020.
  52. Yao, W., Li, J. and Wu, K. (2003), "Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction", Cement Concrete Res., 33(1), 27-30. https://doi.org/10.1016/S0008-8846(02)00913-4.
  53. Yazici, S., Inan, G. and Tabak, V. (2007), "Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC", Constr. Build. Mater., 21(6), 1250-1253. https://doi.org/10.1016/j.conbuildmat.2006.05.025.
  54. Yu, K.Q., Dai, J.G., Lu, Z.D. and Leung, C.K. (2015), "Mechanical properties of engineered cementitious composites subjected to elevated temperatures", J. Mater. Civil Eng., 27(10), 04014268. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001241.

피인용 문헌

  1. Flexural strength of concrete-galvalume composite beam under elevated temperatures vol.27, pp.1, 2019, https://doi.org/10.12989/cac.2021.27.1.013
  2. Effect of basalt fiber on the freeze-thaw resistance of recycled aggregate concrete vol.28, pp.2, 2019, https://doi.org/10.12989/cac.2021.28.2.115