References
- S. Entler, et al., Approximation of the economy of fusion energy, Energy 152 (2018) 489-497. https://doi.org/10.1016/j.energy.2018.03.130
- R. Aymar, et al., The ITER design, Plasma Phys. Contr. Fusion 44 (2002) 519-565. https://doi.org/10.1088/0741-3335/44/5/304
- F. Romanelli, Fusion Electricity, A Roadmap to the Realization of Fusion Energy, EFDA, EU, 2012.
- R. Wenninger, et al., The DEMO wall load challenge, Nucl. Fusion 57 (2017), 046002 (11pp). https://doi.org/10.1088/1741-4326/aa4fb4
- G. Federici, et al., European DEMO design strategy and consequences for materials, Nucl. Fusion 57 (2017), 092002 (26pp). https://doi.org/10.1088/1741-4326/57/9/092002
- C. Reux, et al., Runaway beam studies during disruptions at JET-ILW, J. Nucl. Mater. 463 (2015) 143-149. https://doi.org/10.1016/j.jnucmat.2014.10.002
- J. Horacek, et al., Feasibility study of fast swept divertor strike point suppressing transient heat fluxes in tokamaks DEMO and COMPASS-Upgrade, Fusion Eng. Des. 123 (2017) 646-649. https://doi.org/10.1016/j.fusengdes.2017.01.027
- D. Maisonnier, et al., A Conceptual Study of Commercial Fusion Power Plants, Final Report of the European Fusion Power Plant Conceptual Study (PPCS), 2005. EFDA-RP-RE-5.0.
- J. Aubert, et al., Development of the water-cooled lithium lead blanket for DEMO, Fusion Eng. Des. 89 (2014) 1386-1391. https://doi.org/10.1016/j.fusengdes.2014.01.061
- J. Aubert, et al., Optimization of the first wall for the DEMO water cooled lithium lead blanket, Fusion Eng. Des. 98-99 (2015) 1206-1210. https://doi.org/10.1016/j.fusengdes.2015.01.008
- T.R. Barrett, et al., Progress in the engineering design and assessment of the European DEMO first wall and divertor plasma-facing components, Fusion Eng. Des. 109-111 (2016) 917-924. https://doi.org/10.1016/j.fusengdes.2016.01.052
- L.V. Boccaccini, et al., Objectives and status of EUROfusion DEMO blanket studies, Fusion Eng. Des. 109-111 (2016) 1199-1206. https://doi.org/10.1016/j.fusengdes.2015.12.054
- J. Prokupek, et al., HELCZA - high heat flux test facility for testing ITER EU first wall components, Fusion Eng. Des. 124 (2017) 187-190. https://doi.org/10.1016/j.fusengdes.2017.03.059
- G. Zdaniuk, et al., Experimental determination of heat transfer and friction in helically-finned tubes, Exp. Therm. Fluid Sci. 32 (2008) 761-775. https://doi.org/10.1016/j.expthermflusci.2007.09.006
- A. Hasanpour, et al., A review study on twisted tape inserts on turbulent flow heat exchangers: the overall enhancement ratio criteria, Int. Commun. Heat Mass Transf. 55 (2014) 53-62. https://doi.org/10.1016/j.icheatmasstransfer.2014.04.008
- X. Zhang, et al., Numerical studies on heat transfer and friction factor characteristics of a tube fitted with helical screw-tape without core-rod inserts, Int. J. Heat Mass Transf. 60 (2013) 490-498. https://doi.org/10.1016/j.ijheatmasstransfer.2013.01.041
- M.K. Bhuiya, et al., Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts, Int. Commun. Heat Mass Transf. 46 (2013) 49-57. https://doi.org/10.1016/j.icheatmasstransfer.2013.05.012
- L.J. Brognaux, et al., Single-phase heat transfer in micro-fin tubes, Int. J. Heat Mass Transf. 40 (1997) 4345-4357. https://doi.org/10.1016/S0017-9310(97)00078-1
- P.K. Nagarajan, et al., Studies on heat transfer and friction factor characteristics of turbulent flow through a micro-finned tube fitted with left-right inserts, Appl. Therm. Eng. 30 (2010) 1666-1672. https://doi.org/10.1016/j.applthermaleng.2010.03.025
- P. Sivashanmugam, et al., Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with regularly spaced helical screw-tape inserts, Appl. Therm. Eng. 27 (2007) 1311-1319. https://doi.org/10.1016/j.applthermaleng.2006.10.035
- B. Salam, et al., Heat transfer enhancement in a tube using rectangular-cut twisted tape insert, Procedia Engineering 56 (2013) 96-103. https://doi.org/10.1016/j.proeng.2013.03.094
- A. Mwesigye, et al., Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts, Int. J. Therm. Sci. 99 (2016) 238-257. https://doi.org/10.1016/j.ijthermalsci.2015.08.015
- P. Eiamsa-ard, et al., A case study on thermal performance assessment of a heat exchanger tube equipped with regularly-spaced twisted tapes as swirl generators, Case Studies in Thermal Engineering 3 (2014) 86-102. https://doi.org/10.1016/j.csite.2014.04.002
- J. Guo, et al., A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tape, Int. J. Therm. Sci. 50 (2011) 1263-1270. https://doi.org/10.1016/j.ijthermalsci.2011.02.010
- J. Mahaffy, et al., Best Practice Guidelines for the Use of CFD in Nuclear Reactor Safety Applications, NEA/CSNI/R, 2007, p. 5.
- J.H. You, et al., Conceptual design studies for the European DEMO divertor:rationale and first results, Fusion Eng. Des. 109-111 (2016) 1598-1603. https://doi.org/10.1016/j.fusengdes.2015.11.012
Cited by
- Optimization of the supercritical CO2 power conversion system based on the net efficiency under conditions of the pulse-operated fusion power reactor DEMO vol.194, 2019, https://doi.org/10.1016/j.applthermaleng.2021.116884