References
- T. Yamamoto, A. Katoh, Y. Chikazawa, K. Negishi, Design evaluation method of steel-plate reinforced concrete structure containment vessel for Sodium-Cooled fast reactor, J. Disaster Res. 7 (5) (2012) 645-655. https://doi.org/10.20965/jdr.2012.p0645
- F. Qin, S. Tan, J. Yan, M. Li, Y.L. Mo, F. Fan, Minimum shear reinforcement ratio of steel plate concrete beams, Mater. Struct. 49 (9) (2015) 1-18.
- J.W. Pryer, H.G. Bowerman, The development and use of British steel bi-steel, J. Constr. Steel Res. 46 (1) (1998), 15-15. https://doi.org/10.1016/S0143-974X(98)00135-7
- S. EI-Bahey, M. Bruneau, Bridge piers with structural fuses and Bi-steel columns. I: experimental testing, J. Bridge Eng. 12 (1) (2012) 25-35.
- J.B. Yan, J.Y.R. Liew, X. Qian, J.Y. Wang, Ultimate strength behavior of curved steel-concrete-steel sandwich composite beams, J. Constr. Steel Res. 115 (2015) 316-328. https://doi.org/10.1016/j.jcsr.2015.08.043
- S.K. Solomon, D.W. Smith, A.R. Cusens, Flexural tests of steel-concrete-steel sandwiches, Mag. Concr. Res. 28 (94) (1976) 13-20. https://doi.org/10.1680/macr.1976.28.94.13
- M.J. Tomlinson, A. Tomlinson, M.L. Chapman, et al., 17. Shell Composite Construction for Shallow Draft Immersed Tube Tunnels, Immersed Tunnel Techniques, 1990.
- H. Bowerman, N. Coyle, J.C. Chapman, An innovative steel/concrete construction system, Struct. Eng. 80 (20) (2002) 33-38.
- H.D. Wright, T.O.S. Oduyemi, H.R. Evans, The experimental behaviour of double skin composite elements, J. Constr. Steel Res. 19 (2) (1991) 97-110. https://doi.org/10.1016/0143-974X(91)90036-Z
- Y. Wang, J.Y.R. Liew, S.C. Lee, Ultimate strength of steel-concrete-steel sandwich panels under lateral pressure loading, Eng. Struct. 115 (2016) 96-106. https://doi.org/10.1016/j.engstruct.2016.02.012
- Y.B. Leng, X.B. Song, Experimental study on shear performance of steel-concrete-steel sandwich beams, J. Constr. Steel Res. 120 (2016) 52-61. https://doi.org/10.1016/j.jcsr.2015.12.017
- Y. Yang, J. Liu, X. Nie, J. Fan, Experimental research on out-of-plane cyclic behavior of steel-plate composite walls, J. Earthquake Tsunami 10 (01) (2016) 1650001. https://doi.org/10.1142/S1793431116500019
- M.N. Babu, C.K. Mukhopadhyay, G. Sasikala, S.K. Albert, A.K. Bhaduri, T. Jayakumar, R. Kumar, Study of fatigue crack growth in RAFM steel using acoustic emission technique, J. Constr. Steel Res. 126 (2016) 107-116. https://doi.org/10.1016/j.jcsr.2016.07.007
- M.G. Droubi, N.H. Faisal, F. Orr, J.A. Steel, M. EI-Shaib, Acoustic emission method for defect detection and identification in carbon steel welded joints, J. Constr. Steel Res. 134 (2017) 28-37. https://doi.org/10.1016/j.jcsr.2017.03.012
- Y. Zhou, M. Dawood, B. Gencturk, High-cycle fatigue performance of high-mast illumination pole bases with pre-existing cracks, J. Constr. Steel Res. 138 (2017) 463-472. https://doi.org/10.1016/j.jcsr.2017.07.020
- T. Liu, D. Zou, C. Du, Y. Wang, Influence of axial loads on the health monitoring of concrete structures using embedded piezoelectric tranducers, Struct. Health Monit. 2 (16) (2017) 202-214.
- T. Liu, Y. Huang, D. Zou, J. Teng, B. Li, Exploratory study on water seepage monitoring of concrete structures using piezoceramic based smart aggregates, Smart Mater. Struct. 6 (22) (2013) 065002.
- N. Guo, P. Cawley, The interaction of Lamb waves with delaminations in composite laminates, J. Acoust. Soc. Am. 94 (4) (1993) 2240-2246. https://doi.org/10.1121/1.407495
- R. Seifried, L.J. Jacobs, J. Qu, Propagation of guided waves in adhesive bonded components, NDT&E International 35 (2002) 317-328. https://doi.org/10.1016/S0963-8695(01)00056-1
- Y. Okabe, H. Hirakawa, H. Nakatani, S. Ogihara, Delamination detection in fiber metal laminates using the mode conversion of Lamb waves, in: 7th European Workshop on Structural Health Monitoring, July 8-11, 2014. Nantes, France.
- M.S.H. Castaings, Ultrasonic guided waves for the evaluation of interfacial adhesion, Ultrasonics 54 (2014) 1760-1775. https://doi.org/10.1016/j.ultras.2014.03.002
- K. Tsuyuki, R. Katamura, S. Miura, H. Asanuma, Nondestructive Testing of Concrete Based on Analysis of Velocity Dispersion of Laser Ultrasonics, European Conference on Non-Destructive Testing, 2006.
- C.C. Cheng, Y.T. Ke, K.T. Hsu, Using Lamb waves to evaluate debonding of steel plate strengthened concrete, Mater. Trans. 53 (2) (2012) 274-278. https://doi.org/10.2320/matertrans.I-M2011841
- F. Qin, Q. Kong, M. Li, Y. Mo, G. Song, F. Fan, Bond slip detection of steel plate and concrete beams using smart aggregates, Smart Mater. Struct. 24 (2015) 115039. https://doi.org/10.1088/0964-1726/24/11/115039
- D.G. Aggelis, Classification of cracking mode in concrete by acoustic emission parameters, Mech. Res. Commun. 28 (2011) 153-157. https://doi.org/10.1016/j.mechrescom.2011.03.007
- N.M. Nor, A. Ibrahim, N.M. Bunnori, H.M. Saman, Acoustic emission signal for fatigue crack classification on reinforced concrete beam, Constr. Build. Mater. 49 (2013) 583-590. https://doi.org/10.1016/j.conbuildmat.2013.08.057
- R.V. Sagar, B.K.R. Prasad, S.S. Kumar, An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission technique, Cement Concr. Res. 42 (2012) 1094-1104. https://doi.org/10.1016/j.cemconres.2012.05.003
- R.V. Sagar, M.V.M.S. Rao, An experimental study on loading rate effect on acoustic emission based b-values related to reinforced concrete fracture, Constr. Build. Mater. 70 (2014) 460-472. https://doi.org/10.1016/j.conbuildmat.2014.07.076
- P. Datt, J.C. Kapil, A. Kumar, Acoustic emission characteristics and b-value estimate in relation to waveform analysis for damage response of snow, Cold Reg. Sci. Technol. 119 (2015) 170-182. https://doi.org/10.1016/j.coldregions.2015.08.005
- Federation of Construction Material Industries, Monitoring Method for Active Cracks in Concrete by Acoustic Emission. JCMS-III B5706, Japan, 2003.
- C. Liang, F.P. Sun, C.A. Rogers, Coupled electro-mechanical analysis of adaptive material systems - determination of the actuator power consumption and system energy transfer, J. Intell. Mater. Syst. Struct. 5 (1) (1994) 12-20. https://doi.org/10.1177/1045389X9400500102
- F.P. Sun, Z. Chaudhry, C. Liang, C.A. Rogers, Truss structure integrity identification using PZT sensor-actuator, J. Intell. Mater. Syst. Struct. 6 (1) (1995) 134-139. https://doi.org/10.1177/1045389X9500600117
- Kani GNJ, The riddle of shear failure and its solution, ACI Struct. J. 61 (4) (1964) 441-467.
- GB/T 2611-2007, General Requirements for Testing Machines, China national standardization management committee, 2007.
- GB50081-2002, Standard for Test Method of Mechanical Properties on Ordinary Concrete, The ministry of construction of China, 2002.
- ACI 349M-06, Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary (Metric), American Concrete Institute, Farmington Hills, 2006.
Cited by
- Bond-Slip Monitoring of Concrete Structures Using Smart Sensors—A Review vol.19, pp.5, 2019, https://doi.org/10.3390/s19051231
- Debonding Size Estimation in Reinforced Concrete Beams Using Guided Wave-Based Method vol.20, pp.2, 2019, https://doi.org/10.3390/s20020389
- Detection and Imaging of Debonding in Adhesive Joints of Concrete Beams Strengthened with Steel Plates Using Guided Waves and Weighted Root Mean Square vol.13, pp.9, 2020, https://doi.org/10.3390/ma13092167
- A particle swarm optimization-support vector machine hybrid system with acoustic emission on damage degree judgment of carbon fiber reinforced polymer cables vol.20, pp.4, 2019, https://doi.org/10.1177/1475921720922824
- NDT inspection on TRC and precast concrete sandwich panels: A review vol.296, 2021, https://doi.org/10.1016/j.conbuildmat.2021.123622
- Interfacial imperfection detection for steel-concrete composite structures using NDT techniques: A state-of-the-art review vol.245, 2019, https://doi.org/10.1016/j.engstruct.2021.112778