Study on Property Modification with Kind and Additive Amount of Plasticizer in the Manufacture of Compounds for Cable Sheath

전선피복용 컴파운드의 제조에서 가소제의 종류와 첨가량에 따른 물성 변화 연구

  • Li, Xiangxu (School of Energy, Materials, Chemical Engineering, Korea University of Technology and Education) ;
  • Lee, Sang Bong (School of Energy, Materials, Chemical Engineering, Korea University of Technology and Education) ;
  • Cho, Ur Ryong (School of Energy, Materials, Chemical Engineering, Korea University of Technology and Education)
  • 리시앙수 (한국기술교육대학교 에너지신소재화학공학과) ;
  • 이상봉 (한국기술교육대학교 에너지신소재화학공학과) ;
  • 조을룡 (한국기술교육대학교 에너지신소재화학공학과)
  • Received : 2019.05.15
  • Accepted : 2019.06.18
  • Published : 2019.06.30

Abstract

The four different polymer compounds were manufactured with the two kinds of plasticizers [(di-2-ethylhexyl sebacate(DOS), and di-2-butyl sebacate(DBS)] and two different additive amounts(18, 26 phr) of the same plasticizer for making cable sheath for ship. Ethylene-vinylacetate, ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinylacetate grafted maleic anhydride as coupling agent were selected for compounding with fire retardant, closslinking agent, filler, and other additives besides plasticizer. The compound including DOS showed the higher ${\Delta}T$ than that including DBS at the same additive amount in the rheology test. And with increasing plasticizer, the compounds resulted in lower tensile strength and higher elongation by lubricating effect of plasticizer. DOS yielded better aging resistance and cold resistance than DBS due to the good heat resistance and low solidifying point of DOS compared to DBS.

Keywords

References

  1. Beekman G F and Hastbacka M A., "Magnesium-oxide and Magnesium-hydroxide in Chlorosulfonated Polyethylene for roofing Membranes", Rubber Chemistry and Technology. Rubber Div. Univ. Akron Po. Box 499, Akron, OH 44309-0499: Amer. Chemical Soc. Inc., Vol.59, pp.673-673, 1986.
  2. Y. J. Lee, S. B. Lee, J. Y. Jung, D. H. Lee, and U. R. Cho, "A Study on Composites of Ethylene-Vinyl Acetate Copolymer and Ethylene-Propylene-Diene Rubber with Aluminum Hydroxide as a Fire Retardant", Elastomers and Composites Vol.51, pp.93-98, 2016. https://doi.org/10.7473/EC.2016.51.2.93
  3. Rychly J, and Pavlinec J. "Thermal degradation of free radically prepared poly (methyl methacrylate). A nonisothermal weight loss study", Polymer degradation and stability Vol.28, pp.1-15, 1990. https://doi.org/10.1016/0141-3910(90)90048-C
  4. Rychly, J., and L. Rychla. "Non-isothermal thermogravimetry of polymer", Journal of thermal analysis Vol.35, pp.77-90, 1989. https://doi.org/10.1007/BF01914266
  5. D. H. Lee, K. H. Lee, and U. R. Cho, "Property Comparison of Bio-Polyurethane and Petroleum based Polyurethane", Journal of the Semiconductor & Display Technology, Vol.17, pp.47-52, 2018.
  6. S. H. Jang, L. X. Xu, and U. R. Cho, "A Study on Graphene Oxide and Carboxylated Styrene-Butadiene Rubber(XSBR) Nanocomposites", J. of the Semiconductor & Display Technology, Vol.16, pp.52-58, 2017.
  7. Y. J. Chung, "Combustive Properties of Low Density Polyethylene and Ethylene Vinyl Acetate Composites Including Magnesium Hydroxide", Journal of the Semiconductor & Display Technology, Vol.25, pp.69-75, 2018.
  8. K. H. Ahn, "Development of New Technology for Sludge Lysis and Recycle Using Low Cost Electron Beam", Korea Institute of Science and Technology, pp.13-15, 2001.
  9. M. Lee, D. Yu, T. Kim, S. Lee, J. H. Kim, and Y. C. Lee, "Flame Retardancy and Physical Properties of Ethylene Vinyl Acetate/Aluminum Trihydroxide Composites", Polymer (Korea), Vol.39, pp.433-440, 2015. https://doi.org/10.7317/pk.2015.39.3.433
  10. S. B. Lee, X. X. Li, and U. R. Cho, "Study on Manufacture and Properties of Polymer Compounds for Cable Sheath", Journal of the Semiconductor & Display Technology, Vol.16, pp.52-58, 2018.
  11. S. B. Lee, X. X. Li, and U. R. Cho, "Study on Properties Modify with Different Plasticizers in the Manufacture of Polymer Compounds for Cable Sheath", Elastomers and Composites, Vol.51, pp.93-99, 2018. https://doi.org/10.7473/EC.2016.51.2.93
  12. M. P. Stevens, "Polymer Chemistry", 3rd Ed., Oxford University Press. Oxford New York, pp.156-160, 1999.