DOI QR코드

DOI QR Code

Performance of BDD Electrodes Prepared on Various Substrates for Wastewater Treatment

다양한 기판에 형성된 BDD 전극의 폐수처리 특성

  • Kwon, Jong-Ik (School of Materials Science and Engineering, Pusan National University) ;
  • You, Mi-Young (Department of Materials Science and Engineering, Pusan National University) ;
  • Kim, Seo-Han (Department of Materials Science and Engineering, Pusan National University) ;
  • Song, Pung-Keun (Department of Materials Science and Engineering, Pusan National University)
  • Received : 2019.01.30
  • Accepted : 2019.03.21
  • Published : 2019.04.30

Abstract

Stability and activity of boron doped diamond (BDD) electrode are key factors for water treatment. In this study, BDD electrodes were prepared on various substrates such as Nb, Si, Ti, and $TiN_x/Ti$ by hot filament chemical vapor deposition (HFCVD) method. BDD/Ti film showed the delamination between BDD and Ti substrate due to the formation of TiC layer caused by diffusion of carbon. On the other hand, $BDD/TiN_x/Ti$ showed remarkably improved stability, compared to BDD/Ti. It was confirmed that $TiN_x$ intermediate layer act as barrier layer for diffusion of carbon. High potential window of 2.8 eV was maintained on the $BDD/TiN_x/Ti$ electrode and, better wastewater treatment capability and longer electrode working life than BDD/Nb, BDD/Si and BDD/Ti were obtained.

Keywords

PMGHBJ_2019_v52n2_53_f0001.png 이미지

Fig. 1. FE-SEM images of BDD deposited on different substrates with and without TiNx interlayer: (a) BDD/Nb, (b) BDD/Si, (c) BDD/TiNx/Ti, (d) BDD/Ti.

PMGHBJ_2019_v52n2_53_f0002.png 이미지

Fig. 2. XRD patterns of BDD films deposited on different substrates with and without TiNx interlayer: (a) BDD/Nb, (b) BDD/Si, (c) BDD/TiNx/Ti, (d) BDD/Ti.

PMGHBJ_2019_v52n2_53_f0003.png 이미지

Fig. 3. FE-SEM images of the surface (a) and cross section (b) of TiNx deposited on Ti substrate.

PMGHBJ_2019_v52n2_53_f0004.png 이미지

Fig. 4. Cyclic voltammograms of BDD films deposited on different substrates with and without TiNx interlayer: (a) BDD/Nb, (b) BDD/Si, (c) BDD/TiNx/Ti, (d) BDD/Ti.

PMGHBJ_2019_v52n2_53_f0005.png 이미지

Fig. 5. COD (a) and colon bacillus (b) with sterilization time using BDD electrodes prepared on various substrates of Nb, Si, TiNx/Ti and Ti.

PMGHBJ_2019_v52n2_53_f0006.png 이미지

Fig. 6. Cyclic voltammograms of BDD/Nb and BDD/TiNx/Ti electrodes up to 1000cycles.

References

  1. B. S. Min, W. S. Chung, K. H. Kim, B. C. Min, and M. H. Lee, "Study on Electrochemical Characteristics and Fabrication of Catalytic Electrode", J. Korean Inst. Surf. Eng., vol. 35, no. 6 (2002), p. 401-407.
  2. S.K. Kim, S. W. Park, and D. I. Hong, "A study on dye wastewater treatment using the electrolysis", J. Korean Environ. Siences Soc., vol. 8, no. 4 (1999), p. 539-545.
  3. C. Feng, N. Sugiura, S. Shimada, and T. Maekawa, "Development of a high performance electrochemical wastewater treatment system", J. Hazard. Mater., vol. 103, no. 1-2 (2003), pp. 65-78. https://doi.org/10.1016/S0304-3894(03)00222-X
  4. M. H. Um, B. Y. Ha, and H. C. Kang, "Electrochemical Treatment of Dyeing Wastewater using Insoluble Catalyst Electrode", Clean Tech., vol. 9, no. 3 (2003), p. 133-144.
  5. J. Sun, H. Lu, H. Lin, W. Huang, H. Li, J. Lu, and T. Cui, "Boron doped diamond electrodes based on porous Ti substrates", Mater. Lett., vol. 83 (2012), p. 112-114. https://doi.org/10.1016/j.matlet.2012.05.044
  6. X. Chen, G. Chen, F. Gao, and P. L. Yue, "High-Performance Ti/BDD Electrodes for Pollutant Oxidation", Environ. Sci. Technol., vol. 37, no. 21 (2003), p. 5021-5026. https://doi.org/10.1021/es026443f
  7. L. Guo and G. Chen, "Long-Term Stable Ti/BDD Electrode Fabricated with HFCVD Method Using Two-Stage Substrate Temperature", J. Electrochem. Soc., vol. 154, no. 12 (2007), p. D657-D661. https://doi.org/10.1149/1.2790798
  8. Y. Tian, X. Chen, C. Shang, and G. Chen, "Active and Stable Ti⁄Si⁄BDD Anodes for Electrooxidation", J. Electrochem. Soc., vol. 153, no. 7 (2006), p. J80-J85. https://doi.org/10.1149/1.2202148