Journal of Korean Association for Spatial Structures (한국공간구조학회논문집)

Korean Association for Spatial Structures (한국공간구조학회)
권호 표지
DOI QR코드

DOI QR Code

Seismic Response Control of Mid-Story Isolation System for Planar Irregular Structures

평면 비정형 구조물에 적용된 중간층 면진 시스템의 지진 응답 제어 성능 분석

  • 박효선 (영남대학교 일반대학원 건축학과) ;
  • 김현수 (선문대학교 건축사회환경학부) ;
  • 강주원 (영남대학교 건축학부)
  • Received : 2019.05.28
  • Accepted : 2019.06.07
  • Published : 2019.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the seismic response is investigated by using a relatively low-rise building under torsion-prone conditions and three seismic loads with change of the location of the seismic isolation system. LRB (Lead Rubber Bearing) was used for the seismic isolator applied to the analytical model. Fixed model without seismic isolation system was set as a basic model and LB models using seismic isolation system were compared. The maximum story drift ratio and the maximum torsional angle were evaluated by using the position of the seismic layer as a variable. It was confirmed that the isolation device is effective for torsional control of planar irregular structures. Also, it was shown that the applicability of the mid-story seismic isolation system. Numerical analyses results presented that an isolator installed in the lower layer provided good control performance for the maximum story drift ratio and the maximum torsional angle simultaneously.

Keywords

References

  1. Lee, J. Y., Ju, Y. K., Kim, D. K., & Kim, S. D. (2008). Application of Base Isolation System on the Middle Story of High-Rise Building. Proceedings of Autumn Annual Conference of the Architectural Institute of Korea Structure & Construction, Republic of Korea, Vol.28, No.1, pp.9-12
  2. Choi, W. S., Jung, K. B., & Roh, J. W., "NH Integrated IT Center, Construction Project, Uiwang-Si", Journal of the Architectural Institute of Korea, Vol.61, No.1, pp.63-67, 2016
  3. Kim, M. J., Kim, D. U., Kim, H. S., & Kang, J. W., "Analysis of Seismic Response According to Installation Location of Seismic Isolation System Applied to High-Rise Building", Journal of Korean Association for Spatial Structures, Vol.18, No.4, pp.81-88, 2018 https://doi.org/10.9712/KASS.2018.18.4.81
  4. Hur, M. W., Ahn, T. S., Son, J. W., & Kim, C. S., "Construction of Isolation Device for DONG-IL High-Vill New City", Review of Architecture and Building Science, Vol.54, No.5, pp.81-86, 2010
  5. Moon, D. S. (2004). Application of seismic isolators for irregular structures (Master's thesis). Seoul National University of Science and Technology, Republic of Korea.
  6. Park, J. Y., Jang, K. S., Park, K. N., & Lee, H. P. (2012). Schematic Design of Seismically Isolated Nuclear Facility by Equivalent Lateral Force Procedure using Laminated Rubber Bearings. Proceedings of Computational Structural Engineering Institute of Korea, Republic of Korea, Vol.25, No.1, pp.712-715
  7. Naeim, F., & Kelly, J. M., "Design of Seismic Isolated Structures : from theory to practice", John Wiley, 1999.
  8. DRB Deung-Il., "Seismic Isolation System :Types and Characteristics of Seismic Rubber", Catalogue, 2017
  9. Hu, J. W., "Seismic Behavior and Estimation for Base Isolator Bearings with Self-centering and Reinforcing Systems", Journal of the Korean Society of Civil Engineers, Vol.35, No.5, pp.1025-1037, 2015 https://doi.org/10.12652/Ksce.2015.35.5.1025