References
- Rentzia A, Coleman DC, O'Donnell MJ, Dowling AH, O'Sullivan M. Disinfection procedures: their efficacy and effect on dimensional accuracy and surface quality of an irreversible hydrocolloid impression material. J Dent 2011;39:133-40. https://doi.org/10.1016/j.jdent.2010.11.003
- Choi YR, Kim KN, Kim KM. The disinfection of impression materials by using microwave irradiation and hydrogen peroxide. J Prosthet Dent 2014;112:981-7. https://doi.org/10.1016/j.prosdent.2013.12.017
- Amin WM, Al-Ali MH, Al Tarawneh SK, Taha ST, Saleh MW, Ereifij N. The effects of disinfectants on dimensional accuracy and surface quality of impression materials and gypsum casts. J Clin Med Res 2009;1:81-9. https://doi.org/10.4021/jocmr2009.04.1235
- Flanagan DA, Palenik CJ, Setcos JC, Miller CH. Antimicrobial activities of dental impression materials. Dent Mater 1998;14:399-404. https://doi.org/10.1016/S0300-5712(99)00013-5
- Badrian H, Ghasemi E, Khalighinejad N, Hosseini N. The effect of three different disinfection materials on alginate impression by spray method. ISRN Dent 2012;2012:695151. https://doi.org/10.5402/2012/695151
- Chidambaranathan AS, Balasubramanium M. Comprehensive review and comparison of the disinfection techniques currently available in the literature. J Prosthodont 2019;28:e849-e856. https://doi.org/10.1111/jopr.12597
- Ganavadiya R, Chandra Shekar BR, Saxena V, Tomar P, Gupta R, Khandelwal G. Disinfecting efficacy of three chemical disinfectants on contaminated diagnostic instruments: A randomized trial. J Basic Clin Pharm 2014;5:98-104. https://doi.org/10.4103/0976-0105.141946
- Aeran H, Sharma S, Kumar V, Gupta N. Use of clinical UV chamber to disinfect dental impressions: A comparative study. J Clin Diagn Res 2015;9:ZC67-70.
- Correia-Sousa J, Tabaio AM, Silva A, Pereira T, Sampaio-Maia B, Vasconcelos M. The effect of water and sodium hypochlorite disinfection on alginate impressions. Rev Port Estomatol Med Dent Cir Maxilofac 2013;54:8-12.
- Australian Dental Association (ADA)'s Guidelines for Infection Control, Third Edition. Australian Dental Association, 2015.
- Guidelines for Infection Control in Dental Health-Care Settings. MMWR 2003;52(No RR-17): Centers for Disease Control and Prevention, 2003.
- Almortadi N, Chadwick RG. Disinfection of dental impressions - compliance to accepted standards. Br Dent J 2010;209:607-11. https://doi.org/10.1038/sj.bdj.2010.1134
- Tullner JB, Commette JA, Moon PC. Linear dimensional changes in dental impressions after immersion in disinfectant solutions. J Prosthet Dent 1988;60:725-8. https://doi.org/10.1016/0022-3913(88)90407-6
- Marinheiro Marques MC, Rebelo Amorim SC, Soares Framegas de Araujo FM, Figueiral MH, Maia Correia AR. Behaviors of dentists and dental technicians in Viseu regarding dental impressions disinfection. Rev Port Estomatol Med Dent Cir Maxilofac 2014;55:232-37.
- McDonnell G, Russell AD. Antiseptics and disinfectants: activity, action, and resistance. Clin Microbiol Rev 1999;12:147-79. https://doi.org/10.1128/CMR.12.1.147
- Giammanco GM, Melilli D, Rallo A, Pecorella S, Mammina C, Pizzo G. Resistance to disinfection of a polymicrobial association contaminating the surface of elastomeric dental impressions. New Microbiol 2009;32:167-72.
- Melilli D, Rallo A, Cassaro A, Pizzo G. The effect of immersion disinfection procedures on dimensional stability of two elastomeric impression materials. J Oral Sci 2008;50:441-6. https://doi.org/10.2334/josnusd.50.441
- Pal PK, Kamble SS, Chaurasia RR, Chaurasia VR, Tiwari S, Bansal D. Evaluation of different disinfactants on dimensional accuracy and surface quality of type IV gypsum casts retrieved from elastomeric impression materials. J Int Oral Health 2014;6:77-81.
- Suarez F, Monje A, Galindo-Moreno P, Wang HL. Implant surface detoxification: a comprehensive review. Implant Dent 2013;22:465-73. https://doi.org/10.1097/ID.0b013e3182a2b8f4
- Presterl E, Suchomel M, Eder M, Reichmann S, Lassnigg A, Graninger W, Rotter M. Effects of alcohols, povidone-iodine and hydrogen peroxide on biofilms of Staphylococcus epidermidis. J Antimicrob Chemother 2007;60:417-20. https://doi.org/10.1093/jac/dkm221
- Faria AC, Rodrigues RC, Macedo AP, Mattos Mda G, Ribeiro RF. Accuracy of stone casts obtained by different impression materials. Braz Oral Res 2008;22:293-8. https://doi.org/10.1590/S1806-83242008000400002
- Pande NA, Parkhedkar RD. An evaluation of dimensional accuracy of one-step and two-step impression technique using addition silicone impression material: an in vitro study. J Indian Prosthodont Soc 2013;13:254-9.
- Goel K, Gupta R, Solanki J, Nayak M. A comparative study between microwave irradiation and sodium hypochlorite chemical disinfection: a prosthodontic view. J Clin Diagn Res 2014;8:ZC42-6.
- Ismail HA, Mahross HZ, Shikho S. Evaluation of dimensional accuracy for different complete edentulous impressions immersed in different disinfectant solutions. Eur J Dent 2017;11:242-9. https://doi.org/10.4103/ejd.ejd_268_16
- ISO 4823. Dentistry - Elastomeric impression materials. International Standards Organization (ISO); Geneva; Switzerland, 2015. Available at: https://www.iso.org/standard/60586.html
- American National Standards Institute/American Dental Association. Specification No. 19: Dental elastometric impression materials.: American Dental Association 2004:5.
- Demajo JK, Cassar V, Farrugia C, Millan-Sango D, Sammut C, Valdramidis V, Camilleri J. Effectiveness of disinfectants on antimicrobial and physical properties of dental impression materials. Int J Prosthodont 2016;29:63-7. https://doi.org/10.11607/ijp.4358
- Samra RK, Bhide SV. Comparative evaluation of dimensional stability of impression materials from developing countries and developed countries after disinfection with different immersion disinfectant systems and ultraviolet chamber. Saudi Dent J 2018;30:125-41. https://doi.org/10.1016/j.sdentj.2017.11.005
- Gounder R, Vikas BV. Comparison of disinfectants by immersion and spray atomization techniques on the linear dimensional stability of different interocclusal recording materials: An in vitro study. Eur J Dent 2016;10:7-15. https://doi.org/10.4103/1305-7456.175684
- Kronstrom MH, Johnson GH, Hompesch RW. Accuracy of a new ring-opening metathesis elastomeric dental impression material with spray and immersion disinfection. J Prosthet Dent 2010;103:23-30. https://doi.org/10.1016/S0022-3913(09)60210-9
- Taylor RL, Wright PS, Maryan C. Disinfection procedures: their effect on the dimensional accuracy and surface quality of irreversible hydrocolloid impression materials and gypsum casts. Dent Mater 2002;18:103-10. https://doi.org/10.1016/S0109-5641(01)00027-6
- Rowe AH, Forrest JO. Dental impressions. The probability of contamination and a method of disinfection. Br Dent J 1978;145:184-6. https://doi.org/10.1038/sj.bdj.4804140
- Dasgupta D, Sen SK, Ghosh S, Bhattacharyya J, Goel P. Effectiveness of mouthrinses and oral prophylaxis on reduction of microorganisms count in irreversible hydrocolloid impression: an in vivo study. J Indian Prosthodont Soc 2012;13:578-86.
- Bustos J, Herrera R, Gonzalez U, Martinez A, Catalan A. Effect of inmersion desinfection with 0.5% sodium hypochlorite and 2% glutaraldehyde on alginate and silicone: Microbiology and SEM study. Int J Odontostomat 2010;4:169-77. https://doi.org/10.4067/S0718-381X2010000200011
- Jeyapalan V, Krishnan CS, Ramasubramanian H, Sampathkumar J, Azhagarasan NS, Krishnan M. Comparative evaluation of the antimicrobial efficacy of three immersion chemical disinfectants on clinically derived poly(vinyl siloxane) impressions. J Prosthodont 2018;27:469-75. https://doi.org/10.1111/jopr.12518
- Queiroz DA, Pecanha MM, Neves AC, Frizzera F, Tonetto MR, Silva-Concilio LR. Influence of disinfection with peracetic acid and hypochlorite in dimensional alterations of casts obtained from addition silicone and polyether impressions. J Contemp Dent Pract 2013;14:1100-5. https://doi.org/10.5005/jp-journals-10024-1458
- Thouati A, Deveaux E, Iost A, Behin P. Dimensional stability of seven elastomeric impression materials immersed in disinfectants. J Prosthet Dent 1996;76:8-14. https://doi.org/10.1016/S0022-3913(96)90338-8
- Celebi H, Buyukerkmen EB, Torlak E. Disinfection of polyvinyl siloxane impression material by gaseous ozone. J Prosthet Dent 2018;120:138-43. https://doi.org/10.1016/j.prosdent.2017.09.003
- Aeran H, Sharma S, Kumar V, Gupta N. Use of clinical UV chamber to disinfect dental impressions: A comparative study. J Clin Diagn Res 2015;9:ZC67-70.
- Surendra GP, Anjum A, Satish Babu CL, Shetty S. Evaluation of dimensional stability of autoclavable elastomeric impression material. J Indian Prosthodont Soc 2011;11:63-6. https://doi.org/10.1007/s13191-011-0061-1
- Thota KK, Jasthi S, Ravuri R, Tella S. A comparative evaluation of the dimensional stability of three different elastomeric impression materials after autoclaving - an in vitro study. J Clin Diagn Res 2014;8:ZC48-50.
Cited by
- 3D Digital Impression Systems Compared with Traditional Techniques in Dentistry: A Recent Data Systematic Review vol.13, pp.8, 2019, https://doi.org/10.3390/ma13081982
- Effect of Different Disinfecting Agents on Dental Impressions Contaminated with Candida albicans vol.12, pp.3, 2019, https://doi.org/10.4103/denthyp.denthyp_10_21
- Effect of Surfosept and Deconex® 53 Disinfectant Agents on the Accuracy and Dimensional Stability of Panasil Dental Impression Materials: An Experimental Study vol.2021, 2019, https://doi.org/10.1155/2021/1248531
- Dimensional Stability of Elastomeric Impression Material After Disinfection Via Immersion and Microwave Irradiation vol.15, pp.1, 2021, https://doi.org/10.2174/1874210602115010658
- Additive manufacturing against the Covid-19 pandemic: a technological model for the adaptability and networking vol.16, 2022, https://doi.org/10.1016/j.jmrt.2021.12.044