DOI QR코드

DOI QR Code

Assessment of Equivalent Elastic Modulus of Perforated Spherical Plates

  • 투고 : 2018.11.26
  • 심사 : 2019.06.18
  • 발행 : 2019.06.30

초록

Perforated plates are used for the steam generator tube-sheet and the Reactor Vessel Closure Head in the Nuclear Power Plant. The ASME code, Section III Appendix A-8000, addresses the analysis of perforated plates, however, this analysis is only limited to the flat plate with a triangular perforation pattern. Based on the concept of the effective elastic constants, simulation of flat and spherical perforated plates and their equivalent solid plates were carried out using Finite Element Analysis (FEA). The isotropic material properties of the perforated plate were replaced with anisotropic material properties of the equivalent solid plate and subjected to the same loading conditions. The generated curves of effective elastic constants vs ligament efficiency for the flat perforated plate were in agreement with the design curve provided by ASME code. With this result, a plate with spherical curvature having perforations can be conveniently analyzed with equivalent elastic modulus and equivalent Poisson's ratio.

키워드

HGHRB5_2019_v15n1_8_f0001.png 이미지

Fig. 1 Equivalent material properties(1)

HGHRB5_2019_v15n1_8_f0002.png 이미지

Fig. 2 Plane view of the triangular perforate plate.

HGHRB5_2019_v15n1_8_f0003.png 이미지

Fig. 3 Flat perforated plate

HGHRB5_2019_v15n1_8_f0004.png 이미지

Fig. 4 Perforations parallel to the plate surface.

HGHRB5_2019_v15n1_8_f0005.png 이미지

Fig. 5 Perforations normal to the plate surface.

HGHRB5_2019_v15n1_8_f0006.png 이미지

Fig. 6 Equivalent Flat Solid Plate loading and B.C.

HGHRB5_2019_v15n1_8_f0007.png 이미지

Fig. 7 Flat perforated plate loading and B.C.

HGHRB5_2019_v15n1_8_f0008.png 이미지

Fig. 8 Equivalent spherical solid plate loading and B.C.

HGHRB5_2019_v15n1_8_f0009.png 이미지

Fig. 9 Spherical perforated plate loading and B.C.

HGHRB5_2019_v15n1_8_f0010.png 이미지

Fig. 10 An example of mesh plot with quadratic elements.

HGHRB5_2019_v15n1_8_f0011.png 이미지

Fig. 11 Procedure to determine the equivalent material constants

HGHRB5_2019_v15n1_8_f0012.png 이미지

Fig. 12 Flat perforated plate equivalent material properties

HGHRB5_2019_v15n1_8_f0013.png 이미지

Fig. 13 Comparison of FEA result effective elastic constants and ASME design curves.

HGHRB5_2019_v15n1_8_f0014.png 이미지

Fig. 14 Equivalent elastic constants for a spherical plate with perforation parallel to the plane.

HGHRB5_2019_v15n1_8_f0015.png 이미지

Fig. 15 Equivalent elastic constants for a spherical plate with perforation normal to the surface

HGHRB5_2019_v15n1_8_f0016.png 이미지

Fig. 16 Comparison of the equivalent material properties of the spherical plate with perforation normal to the surface and parallel to the plane.

HGHRB5_2019_v15n1_8_f0017.png 이미지

Fig. 17 Comparison of the equivalent material properties of the flat and spherical plate with perforation normal to the surface and parallel to the plane.

Table 1 FEA results for equivalent material constants.

HGHRB5_2019_v15n1_8_t0001.png 이미지

Table 2 Equivalent elastic constants.

HGHRB5_2019_v15n1_8_t0002.png 이미지

Table 3 Equivalent elastic constants.

HGHRB5_2019_v15n1_8_t0003.png 이미지

참고문헌

  1. ASME BPVC Sec.III, 2010, "Rules for Construction of Nuclear Facility Component, Division 1, Appendix A-8000, Stresses in Perforated Flat Plates," American Society of Mechanical Engineers, New York
  2. Horvay, G, 1925, "The plane stress problem of perforated plates," Journal of. Applied Mechanics, Transactions of. ASME, Vol. 74, pp. 355-360
  3. Malkin, T., 1952, "Notes on a theoretical basis for the design of tube sheets of triangular layout," Journal of. Applied Mechanics, Transactions of. ASME, Vol. 74, pp. 389-396
  4. Slot, T., and O'Donnell, W.J., 1971, "Effective elastic constants for thick perforated plates with square and triangular penetration pattern," Journal of. Applied Mechanics, Transactions of. ASME, Vol. 93, pp. 1081-1088
  5. Bailey, R. and Hicks, R., 1960, "Behaviour of perforated plates under plane stress," Journal of. Applied Mechanics, Transactions of. ASME., Vol. 2, (2), pp. 143-161
  6. Duncan, J.P. and Upfold, R.W., 1963, "Equivalent elastic properties of perforated bars and plates," Journal of. Mechanical Engineering and Science., Vol. 15, (1), pp. 53-65 https://doi.org/10.1243/JMES_JOUR_1963_005_009_02
  7. Meijers. P., 1969, "Plate with a Doubly-Periodic Pattern of Circular Holes Loaded in Plane Stress or in Bending," ASME Publication on First International Conference on Pressure Vessel Technology, Delft, the Netherlands