Figure 1. Configure (L) and Model (R) for the reduction system of exhaust gas.
Figure 2. Pressure distribution for the reduction system of exhaust gas.
Figure 3. Flow distribution for reduction system of exhaust gas.
Figure 4. Geometry for the reduction system of exhaust gas with plate baffle.
Figure 5. Flow velocity distribution of DOC with plate baffle.
Figure 6. Baffle installation point in the system.
Figure 7. Flow velocity distribution of DOC with Baffle ①.
Figure 8. Flow velocity distribution of ② Baffle.
Figure 9. Flow velocity distribution of ③ Baffle.
Figure 10. DOC flow velocity distribution at mass flow rate of 5,661 kg h-1.
Figure 11. DOC flow velocity distribution at mass flow rate of 3,774 kg h-1.
Table 1. Characteristics of exhaust gas
Table 2. Average flow rate and pressure distribution with the position of DOC and DPF
Table 3. Flow uniformity with the position of DOC and DPF
Table 4. Flow uniformity and pressure distribution of DOC with plate baffle
Table 5. Flow uniformity and pressure distribution of baffle ①
Table 6. Flow uniformity and pressure distribution of ② Baffle
Table 7. Flow uniformity and pressure distribution of ③ Baffle
Table 8. DOC flow uniformity and Pressure distribution at mass flow rate of 5,661 kg h-1
Table 9. DOC flow uniformity and Pressure distribution at mass flow rate of 3,774 kg h-1
References
- IMO, "Third IMO greenhouse gas study," International Maritime Organization (2014).
- IMO, "Report of the marine environment protection committee on its' fifty-eighth session - revised MARPOL annex VI," International Maritime Organization (17 October, 2008).
- IMO, "Report of the marine environment protection committee on its' fifty-eighth session - revised NOx technical code," International Maritime Organization (17 October, 2008).
- Choi. B. K., and Cho. J. D., "Study on the Improvement of Uniformity of Inlet Velocity in Exhaust After-treatment System for System for Heavy Duty Engine," Korean Society of Automotive Engineers Conference, 357-360 (2002).
- Jeong, S. Y., Lee. W., Lee. G. S., Kim. K. H., Bae. S. H., and Kim. H. S., "A Study on Flow Characteristics in Diesel Particle Filter for Heavy-duty Diesel Engine", Korean Society of Automotive Engineers Conference, 280-284 (2006).
- Lemme, C., and Givens, W., "Flow Through Catalytic Converters - An Analytical and Experimental Treatment," SAE Technical Paper 740243 (1974).
- Johnson, W., and Chang, J., "Analytical Investigation of the Performance of Catalytic Monoliths of Varying Channel Geometries Based on Mass Transfer Controlling Conditions," SAE Technical Paper 740196 (1974).
- Lai, M.-C., Kim, J.-Y., Cheng, C.-Y., Li, P., Chui, G., and Pakko, J. D., "Three-Dimensional Simulations of Automotive Catalytic Converter Internal Flow," SAE Technical Paper 910200 (1991).
- Baxendale, A. J., "Computational Fluid Dynamics in Exhaust System Design and Development," 94 Interanional E/G Design, Sterling Publication, Ltd., 126-130 (1994).
- Weltens, H., Bressler, H., Terres, F., Neumaier, H., and Rammoser. D., "Optimisation of Catalytic Converter Gas Flow Distribution by CFD Prediction," SAE Technical Paper 930780 (1993).
- Ahn. J. Y., Ku. J. H, Park. J. K., and Kim. J. W., "A Study on the Pressure Drop and Flow Characteristics depending upon the inlet.Outlet Geometry of Catalytic Converter," KSAE 81-86 (2007).