Figure 1. Picture of the lab-scale electrostatic precipitator.
Figure 2. Schematic diagram of the apparatus and size
Figure 3. Method of velocity measurements.
Figure 5. Flow distribution without the perforated plate at (a) zone 1, (b) zone 2 and (c) zone 3.
Figure 6. Flow distribution with the perforated plate for test 3 at (a) zone 1, (b) zone 2 and (c) zone 3.
Figure 4. Location of perforated plates (1st, 2nd, 3rd P.P) and traverse station (S1, S2, S3) for diffuser (dimension : mm).
Figure 7. Flow distribution changing the porosity of the perforated plate (a) 1st P.P, (b) 2nd P.P and (c) 3rd P.P.
Table 1. Dimension of the electrostatic precipitator
Table 2. Summary of experimental conditions
Table 3. Conditions of perforated plates located inside the diffuser
Table 4. Velocity distribution in the collection chamber of the electrostatic precipitator
참고문헌
- Jedrusik, M., Swierczok, A., and Luszkiewicz, D., "Physical and Numerical Modelling of Gas Flow in Electrostatic Precipitator," Przegląd Elektrotechniczny, 93, 2 (2017).
- Barratt, D., and Kim, T., "A Banked Wide-Angle Diffuser with Application to Electrostatic Precipitators," Proc. Inst. Mech. Eng. A: J. Power Energy, 229, 88-98 (2015). https://doi.org/10.1177/0957650914553458
- Reneau, L. R., Johnston, J., and Kline, S. J., "Performance and Design of Straight, Two-Dimensional Diffusers," J. Basic Eng., 89, 141-150 (1967). https://doi.org/10.1115/1.3609544
- IDELCHIK, I., and Aleksandrov, V., "Effect of Nonuniformity of Gas-flow on Efficiency of Electrostatic Precipitators," Therm. Eng., 21, 85-87 (1974).
- Jedrusik M., Elektrofiltry Rozwiniecie wybranych technik podwyzszania skutecznosci odpylania. Oficyna Wydawnicza Politechniki Wroclawskiej (2008).
- Ward-Smith, A., Lane, D., Reynolds, A., Sahin, B., and Shawe, D., "Flow Regimes in Wide-Angle Screened Diffusers," Int. J. Mech. Sci., 33, 41-54 (1991). https://doi.org/10.1016/0020-7403(91)90026-Y
- Sahin, B., and Ward-Smith, A., "The Pressure Distribution in and Flow Characteristics of Wide-Angle Diffusers using Perforated Plates for Flow Control with Application to Electrostatic Precipitators," Int. J. Mech. Sci., 35, 117-127 (1993). https://doi.org/10.1016/0020-7403(93)90070-B
- Sahin, B., and Ward-Smith, A., "The Use of Perforated Plates to Control the Flow Emerging from a Wide-Angle Diffuser, with Application to Electrostatic Precipitator Design," Int. J. Heat Fluid Flow, 8, 124-131 (1987). https://doi.org/10.1016/0142-727X(87)90011-7
- Mehta, R., "The Aerodynamic Design of Blower Tunnels with Wide-Angle Diffusers," Prog. Aeosp. Sci., 18, 59-120 (1979). https://doi.org/10.1016/0376-0421(77)90003-3
- Sahin, B., Ward-Smith, A., and Lane, D., "The Pressure Drop and Flow Characteristics of Wide-Angle Screened Diffusers of Large Area Ratio," J. Wind Eng. Ind. Aerodyn., 58, 33-50 (1995). https://doi.org/10.1016/0167-6105(95)00018-M
- Swaminathan, M., and Mahalakshmi, N., "Numerical Modelling of Flow through Perforated Plates Applied to Electrostatic Precipitator," J. Appl. Sci., 10, 2426-2432 (2010). https://doi.org/10.3923/jas.2010.2426.2432