DOI QR코드

DOI QR Code

Development of Auxiliary Wheel Unit Mechanism for Overcoming Obstacles

  • Han, Jae-Oh (Dept. of Mechanical Engineering, Chung-Ang University) ;
  • Youm, Kwang-Wook (Dept. of Mechanical and Automotive Engineering, Hanyaang cyber University)
  • 투고 : 2019.03.10
  • 심사 : 2019.03.21
  • 발행 : 2019.06.30

초록

Recently, the spread of personal mobility has been rapidly increasing due to the development of environmentally friendly alternative transportation means. In addition, the level of battery technology is also rapidly developing, accelerating the popularization of personal mobility. Such personal mobility has convenience of location transfer, amusement, and high portability compared to other transportation devices. Most personal mobility, however, is made up of small wheels, which cannot overcome obstacles such as rugged roads or obstacles on the road. In this paper, to solve these problems, we tried to devise a device that can easily overcome obstacles by combining wheels with small moving means. The wheel size can be mounted on the front wheel of the small moving means in a protruding manner so that obstacles can be encountered before the front wheels and the safety and ride comfort of the running can be improved.

키워드

OTNBCL_2019_v8n2_30_f0001.png 이미지

Figure 1. Conceptual design of auxiliary wheel unit

OTNBCL_2019_v8n2_30_f0002.png 이미지

Figure 2. The driving mechanism of the auxiliary wheel unit

OTNBCL_2019_v8n2_30_f0003.png 이미지

Figure 3. Horizontal and vertical component impulse comparison graph before and aftermounting of auxiliary wheel unit longer than front wheel radius

OTNBCL_2019_v8n2_30_f0004.png 이미지

Figure 4. 2nd prototype design throughcomplementation of 1st prototype design

OTNBCL_2019_v8n2_30_f0005.png 이미지

Figure 5. Manufacture of prototype model

Table 1. When the radius of the auxiliary wheel unit is shorter than the radius of the front wheel, the offset distance variation due to the change of the auxiliary wheel unit radius

OTNBCL_2019_v8n2_30_t0001.png 이미지

Table 2. When the radius of the auxiliary wheel unit is longer than the radius of the front wheel, the offset distance variation due to the change of the auxiliary wheel unit radius

OTNBCL_2019_v8n2_30_t0002.png 이미지

Table 3. When the radius of the auxiliary front wheel, impact of horizontal component

OTNBCL_2019_v8n2_30_t0003.png 이미지

Table 4. When the radius of the auxiliary front wheel, impact of vertical component

OTNBCL_2019_v8n2_30_t0004.png 이미지

Table 5. When the radius of the auxiliary front wheel, impact of horizontal component

OTNBCL_2019_v8n2_30_t0005.png 이미지

Table 6. When the radius of the auxiliary front wheel, impact of vertical component

OTNBCL_2019_v8n2_30_t0006.png 이미지

참고문헌

  1. Roozegar, M. and, Setiawan, Y.D. and Angeles, J, "Design, modelling and estimation of a novel modular multispeed transmission system for electric vehicles", Mechatronics 45, pp.119-129, 2017. DOI: http://dx.doi.org/10.1016/j.mechatronics.2017.06.002
  2. Ren Q, Crolla D, Morris A, "Effect of transmission design on electric vehicle (EV) performance", 2009 IEEE vehicle power and propulsion conference,2009. DOI: http://dx.doi.org/10.1109/VPPC.2009.5289707
  3. Sorniotti, A. and Subramanyan, S. and Turner, A. and Cavallino, C. and Viotto, F. and Bertolotto, S, "Selection of the optimal gearbox layout for an electric vehicle", SAE Int J Engines, 4(1):1267-80, 2011. DOI: http://dx.doi.org/10.4271/2011-01-0946
  4. Holdstock, T. and Sorniotti, A. and Everitt, M. and Fracchia, M. and Bologna, S. and Bertolotto, S, "Energy consumption analysis of a novel four-speed dual motor drivetrain for electric vehicles", 2012 IEEE vehicle power and propulsion conference, 2012. DOI: http://dx.doi.org/10.1109/VPPC.2012.6422721
  5. Zhou, X. and Walker, P. Zhang, N. and Zhu, B. and Ruan, J., "Numerical and experimental investigation of drag torque in a two-speed dual clutch transmission", Mech Mach Theory,Vol. 79 pp. 46-63, 2014. DOI: https://doi.org/10.1016/j.mechmachtheory.2014.04.007
  6. Nam, K. and Fujimoto, H. and Hori, Y, "Advanced motion control of electric vehicles based on robust lateral tire force control via active front steering", IEEE/ASME Trans. Mechatronics, vol. 19, no. 1, pp. 289-299, 2014. DOI: http://dx.doi.org/10.1109/TMECH.2012.2233210
  7. Chen, Y. and Wang, J, "Design and experimental evaluations on energy efficient control allocation methods for over actuated electric vehicles: Longitudinal motion case", IEEE/ASME Trans. Mechatronics, vol. 19, no. 2, pp. 538-548, 2014. DOI: http://dx.doi.org/10.1109/TMECH.2013.2249591
  8. Yin, D. and Hu, J.-S, "Active approach to electronic stability control for front-wheel drive in-wheel motor electric vehicles", Int. J. Autom. Technol., vol. 15, no. 6, pp. 979-987, 2014. DOI: https://doi.org/10.1007/s12239-014-0103-x
  9. Suzuki, Y. and Kano, Y. and Abe, M, "A study on tyre force distribution controls for full drive-by-wire electric vehicle," Vehicle Syst. Dynamics: International Journal of Vehicle Mechanics and Mobility, vol. 52, pp. 235-250, 2014. DOI: http://dx.doi.org/10.1080/00423114.2014.894198
  10. Bang, Y.B. and Yoon, M, "3-Speed Transmission Using Dual Motors and One-Way Clutches", IEEE/ASME Transactions on mechatronics, vol. 21, no. 1, 2016. DOI: http://dx.doi.org/10.1109/TMECH.2015.2468582
  11. Yang, F. and Zhao, L. and Yu, Y. and Zhou, C.C, "Analytical description of ride comfort and optimal damping of cushion-suspension for wheel-drive electric vehicles", International Journal of Automotive Technology, Vol. 18, No. 6, pp. 1121-1129, 2017. DOI: https://doi.org/10.1007/s12239-017-0109-2
  12. Kim, J, "Design of a compact 18-speed epicyclic transmission for a personal mobility vehicle", International Journal of Automotive Technology, Vol. 17, No. 6, pp. 977-982, 2016. DOI: https://doi.org/10.1007/s12239-016-0095-9
  13. Hiroki, N. and Naoya, A, "Case study: Tourist decisions in renting various personal travel modes: A case study in Kitakyushu City, Japan", Tourism Management, 55, pp85-93, 2016. DOI: https://doi.org/10.1016/j.tourman.2016.02.005
  14. Xin, X. and Lu. X. and Yuye, H. and Teng, G. and Yu, Z, "Vehicle stability control based on driver's emergency alignment intention recognition", International Journal of Automotive Technology, Vol. 18, No. 6, pp. 993-1006, 2017. DOI: https://doi.org/10.1007/s12239-017-0097-2
  15. Erke, A, "Effects of electronic stability control (ESC) on accidents: A review of empirical evidence", Accident Analysis and Prevention Vol/ 40, No. 1, pp.167-173, 2008. DOI: https://doi.org/10.1016/j.aap.2007.05.002