DOI QR코드

DOI QR Code

Wind spectral characteristics on fatigue responses of towerbase and moorings of a floating offshore wind turbine

  • Udoh, Ikpoto E. (Houston Offshore Engineering / Atkins, a member of the SNC-Lavalin Group) ;
  • Zou, Jun (Houston Offshore Engineering / Atkins, a member of the SNC-Lavalin Group)
  • 투고 : 2018.12.07
  • 심사 : 2019.03.25
  • 발행 : 2019.06.25

초록

The tower-platform interface and mooring system of floating offshore wind turbines (FOWTs) are some of the most critical components with significant influences on overall project costs. In addition to satisfying strength requirements, it is typical and vital to meet fatigue criteria for a service life of 25 years or more. Wind spectra characteristics considered in analysis can penalize fatigue designs, leading to unnecessary costs. The International Electrotechnical Commission (IEC, 2009) recommends the use of site-specific wind data (spectrum, turbulence intensity, etc.) in design of FOWTs, but for offshore sites it is often the case that such data is unavailable and land-based data are used as surrogates in design. For such scenarios, it is worth investigating whether such alternative approach is suitable and accurate, and understanding the consequence of the selection of wind spectral characteristics on fatigue design. This paper addresses the impact of the subsequent selection on fatigue responses of towerbase and mooring system in a FOWT, as a sequel to the paper by Udoh and Zou (2018) which focused on impacts on strength design. The 5 MW semi-submersible FOWT platform with six mooring lines implemented in the preceding study is applied in analysis. Results indicate significant variations in resulting fatigue life with considered wind parameters. Thus, it is critical to apply proper wind spectra characteristics for analysis and design of FOWTs to avoid unnecessary conservatism and costs. Based on the findings of this study, more explicit guidance on the application of turbulence intensities for IEC-recommended models in offshore sites could lead to more accurate load estimates in design of FOWTs.

키워드

참고문헌

  1. Anderson, O.J. and LO vseth, J. (1992), "The maritime turbulent wind field. measurements and models", Final Report for Task 4 of the Statoil Joint Industry Project, Norwegian Institute of Science and Technology, Trondheim, Norway.
  2. Anderson, O.J. and LO vseth, J. (2006), "The FrO ya database and maritime boundary layer wind description", Mar. Struct., 19, 173-192. https://doi.org/10.1016/j.marstruc.2006.07.003
  3. Bir, G. (2005), "User's guide to BMODES (Software for computing rotating beam coupled modes)", Technical Report, National Renewable Energy Laboratory, NREL/TP-500-39133, Golden CO. USA.
  4. Det Norske Veritas (2011), Recommended Practice DNV-RP-C203, Fatigue Design of Offshore Steel Structures, 12-2.
  5. Downing, S.D. and Socie, D.F. (1982), "Simple rainflow counting algorithms", Int. J. Fatigue, 4(1), 31-40. https://doi.org/10.1016/0142-1123(82)90018-4
  6. Homb, R.H. (2013), "Fatigue analysis of mooring lines on floating wind turbine hywind demo", Master's Thesis, Norwegian University of Science and Technology.
  7. International Electrotechnical Commission (2005), IEC 61400-1, International Standard on Wind Turbines, Part 1: Design Requirements, Third Edition, 1301-1328.
  8. International Electrotechnical Commission (2009), IEC 61400-3 (BS EN 61400-3), International Standard on Wind Turbines, Part 3: Design Requirements for Offshore Wind Turbines.
  9. Jonkman, B.J. and Buhl, M.L., Jr. (2005), "FAST user's guide", Technical Report, National Renewable Energy Laboratory, NREL/TP-500-38230, Golden CO. USA.
  10. Jonkman, B.J. and Kilcher, L. (2012), "Turbsim user's guide", Technical Report, National Renewable Energy Laboratory, Golden CO. USA.
  11. Jonkman, J. Butterfield S., Musial, W. and Scott, G. (2009), "Definition of a 5-MW reference wind turbine for offshore system development", Technical Report, National Renewable Energy Laboratory, NREL/TP-500-38060, Golden CO. USA.
  12. Kaimal, J.C., Wyngaard, J.C., Haugen, D.A., Cote, O.R. and Izumi, Y. (1976), "Turbulence structure in the convective boundary layer", J. Atmosph. Sci., 33(417), 2152-2169. https://doi.org/10.1175/1520-0469(1976)033<2152:TSITCB>2.0.CO;2
  13. Kaimal, J.C., Wyngaard, J.C., Izumi, Y. and Cote, O.R. (1972), "Spectral Characteristics of Surface-layer Turbulence", J. Roy.Meteorol. Soc., 98(417), 563-589. https://doi.org/10.1002/qj.49709841707
  14. Maritime Research Institute Netherlands (2007), "Wind Loads on Offshore Structures (WINDOS), User Guide for WINDOS Engineering Tool".
  15. Masciola, M., Robertson A., Jonkman, J. and Driscoll, F. (2011), "Investigation of a FAST-OrcaFlex Coupling Module for Integrating Turbine and Mooring Dynamics of Offshore Floating Structures", National Renewable Energy Laboratory, NREL/CP-5000-52896, Golden CO. USA.
  16. Masciola, M., Robertson, A., Jonkman, J., Coulling, A. and Goupee, A., "Assessment of the Importance of Mooring Dynamics on the Global Response of the DeepCwind Floating Semisubmersible Offshore Wind Turbine", International Offshore and Polar Engineering Conference, June 30 - July 5, Anchorage, Alaska, USA.
  17. Orcina Ltd., OrcaFlex User Manual, version 9.7, www.orcina.com.
  18. Udoh, I.E. and Zou, J. (2016), "Wind turbulence effects in global responses of a 5 MW wind turbine TLP", Proceedings of the 21ST Offshore Symposium - Texas Section of the Society of Naval Architects and Marine Engineers, Houston, USA, February.
  19. Udoh, I.E. and Zou, J. (2018), "Wind spectral characteristics on strength design of floating offshore wind turbines", Ocean Syst. Eng., 8(3), 281-312. https://doi.org/10.12989/OSE.2018.8.3.281
  20. Udoh, I.E., Zou, J. and Edgar, C. (2016), "Impacts of wind turbulence on the performances of s semi-submersible type and TLP-type wind turbine", Proceedings of the Offshore Technology Conference, OTC-27261-MS, Houston, USA, May.
  21. WAMIT Inc. (2006), WAMIT User Manual, version 6.4, Massachusetts Institute of Technology and www.wamit.com.