DOI QR코드

DOI QR Code

Residual stress in an elastoplastic annular disc interacting with an elastic inclusion

  • Zarandi, Somayeh Bagherinejad (Department of Civil Engineering, National Cheng Kung University) ;
  • Lai, Hsiang-Wei (Department of Civil Engineering, National Cheng Kung University) ;
  • Wang, Yun-Che (Department of Civil Engineering, National Cheng Kung University) ;
  • Aizikovich, Sergey M. (Research and Education Center "Materials", Don State Technical University and Vorovich Research Institute of Mechanics and Applied Mathematics, Southern Federation University)
  • Received : 2019.03.22
  • Accepted : 2019.04.13
  • Published : 2019.06.25

Abstract

Elastoplastic analysis of an annular disc, being fully constrained on its outer rim and interacting with a purely elastic inclusion perfectly bonded with its inner rim, is conducted to study its plastic deformation and residual stress under thermal cycles. The system is termed the composite disc. Quasi-static plane-strain deformation is assumed, and the von Mises yield criterion with or without the Ludwik hardening rule is adopted in our finite element calculations. Effects of multiple material properties simultaneously being temperature dependent on the plastic behavior of the composite disc are considered. Residual stress is analyzed from a complete loading and unloading cycle. Results are discussed for various inclusion radii. It is found that when temperature dependent material properties are considered, the maximum residual stress may be greater than the maximum stress inside the disc at the temperature-loaded state due to lower temperature having larger yield stress. Temperature independent material properties overestimate stresses inside materials, as well as the elastic irreversible temperature and plastic collapse temperature.

Keywords

Acknowledgement

Supported by : Taiwan Ministry of Science and Technology

References

  1. Alexandrov, S. and Alexandrova, N. (2001), "Thermal effects on the development of plastic zones in thin axisymmetric plates", J. Strain Anal. Eng. Des., 36(2), 169-175. https://doi.org/10.1243%2F0309324011512720. https://doi.org/10.1243/0309324011512720
  2. Alexandrov, S. and Chikanova, N. (2000), "Elastic-plastic stress-strain state of a plate with a pressed-in inclusion in thermal field", Mech. Solids, 35, 125-132.
  3. Alexandrov, S., Chung, K. and Jeong, W. (2018), "Stress and strain fields in rotating elastic/plastic annular disks of pressure-dependent material", Mech. Based Des. Struct. Machines, 46(3), 318-332. https://doi.org/10.1080/15397734.2017.1342095.
  4. Alexandrov, S., Wang, Y.C. and Aizikovich, S. (2014), "Effect of temperature-dependent mechanical properties on plastic collapse of thin discs", J. Mech. Eng. Sci. Part C, 228(14), 2483-2487. https://doi.org/10.1177%2F0954406213519757. https://doi.org/10.1177/0954406213519757
  5. Alexandrov, S., Wang, Y.C. and Jeng, Y.R. (2014), "Elastic-plastic stresses and strains in thin discs with temperature-dependent properties subject to thermal loading", J. Therm. Stresses, 37(4), 488-505. https://doi.org/10.1080/01495739.2013.870864.
  6. Alexandrov, S.E., Kien, N.D., Manh, D.V. and Grechnikov, F.V. (2016), "Plane strain bending of a bimetallic sheet at large strains", Struct. Eng. Mech., 58(4), 641-659. https://doi.org/10.12989/sem.2016.58.4.641.
  7. Alexandrov, S.E., Lomakin, E.V. and Jeng, Y.R. (2012), "Solution of the thermoelasticplastic problem for a thin disk of plastically compressible material subject to thermal loading", Dokl. Phys., 57(3), 136-139. https://doi.org/10.1134/S1028335812030081.
  8. Alexandrov, S.E., Pirumov, A.R. and Jeng, Y.R. (2016), "Description of reversed yielding in thin hollow discs subject to external pressure", Struct. Eng. Mech., 58(4), 661-676. https://doi.org/10.12989/sem.2016.58.4.661.
  9. Argeso, H. and Eraslan, A.N. (2008), "On the use of temperature-dependent physical properties in thermomechanical calculations for solid and hollow cylinders", Int. J. Thermal Sci., 47(2), 136-146. https://doi.org/10.1016/j.ijthermalsci.2007.01.029.
  10. COMSOL (2019), www.comsol.com.
  11. Hill, R. (1950), The Mathematical Theory of Plasticity, Oxford University Press Inc., New York, U.S.A.
  12. Krenev, L.I., Aizikovich, S.M., Tokovyy, Y.V. and Wang, Y.C. (2015), "Axisymmetric problem on the indentation of a hot circular punch into an arbitrarily nonhomogeneous half-space", Int. J. Solids Struct., 59, 18-28. https://doi.org/10.1016/j.ijsolstr.2014.12.017.
  13. Lubliner, J. (1990), Plasticity Theory, Macmillan Publishing Company, New York, U.S.A.
  14. Noda, N. (1991), "Thermal stresses in materials with temperature-dependent properties," Appl. Mech. Rev., 44(9), 383-397. https://doi.org/10.1115/1.3119511.
  15. Sayman, O. and Arman, Y. (2006), "Thermal stresses in a thermoplastic composite disc under a steady state temperature distribution", J. Rein. Plas. Compos., 25(16), 1709-1722. https://doi.org/10.1177%2F0731684406068416. https://doi.org/10.1177/0731684406068416
  16. Seif, M., Main, J., Weigand, J., Sadek, F., Choe, L., Zhang, C., Gross, J., Luecke, W. and McColskey, D. (2016), "Temperature-dependent material modeling for structural steels: Formulation and application", NIST Technical Note 1907, US Department of Commerce, National Institute of Standards and Technology.
  17. Topcu, M., Altan, G., Callioglu, H. and Altan, B.D. (2008), "Thermal elastic-plastic analysis of an aluminium composite disc under linearly decreasing thermal loading", Adv. Compos. Lett., 17(3), 87-96. https://doi.org/10.1177%2F096369350801700302.
  18. Wang, Y.C. and Ko, C.C. (2015), "Energy dissipation of steel-polymer composite beam-column connector", Steel Compos. Struct., 18(5), 1161-1176. https://doi.org/10.12989/scs.2015.18.5.1161.
  19. Wang, Y.C., Alexandrov, S. and Jeng, Y.R. (2013), "Effects of thickness variations on the thermal elastoplastic behavior of annular discs", Struct. Eng. Mech., 47(6), 839-856. https://doi.org/10.12989/sem.2013.47.6.839.
  20. Wang, Y.C., Shen, M.W. and Liao, S.M. (2017), "Microstructural effects on the Poisson's ratio of star-shape two-dimensional systems", Physica Status Solidi B, 254(12), 1700024. https://doi.org/10.1002/pssb.201700024.
  21. Zarandi, S.B., Wang, Y.C. and Novozhilova, O.V. (2016), "Plastic behavior of circular discs with temperature-dependent properties containing an elastic inclusion", Struct. Eng. Mech., 58(4), 731-743. https://doi.org/10.12989/sem.2016.58.4.731.