DOI QR코드

DOI QR Code

Compression and shear responses of structured clays during subyielding

  • Suebsuk, Jirayut (Department of Civil Engineering, Faculty of Engineering and Architecture, Rajamangala University of Technology Isan) ;
  • Horpibulsuk, Suksun (School of Civil Engineering and Center of Excellence in Innovation for Sustainable Infrastructure Development, Suranaree University of Technology) ;
  • Liu, Martin D. (Faculty of Engineering, The University of Wollongong)
  • Received : 2017.09.15
  • Accepted : 2019.05.13
  • Published : 2019.06.10

Abstract

This article discusses the phenomenon of plastic volumetric deformation of naturally structured clays before virgin yielding, i.e., subyielding behavior. A simple approach representing both the compression and shear responses of the clays during subyielding is demonstrated. A new compression model for structured clays based on the theoretical framework of the Structured Cam Clay (SCC) model via incorporation of the subyielding behavior is presented. Two stress surfaces are introduced to distinguish the subyielding and virgin yielding. The hardening and destructuring processes of structured clays under isotropic compression and shear are the focus of this work. The simulations of the compression and shear of eleven natural clays are studied for validation. The proposed work can accurately predict the subyielding behavior of structured clays both qualitatively and quantitatively and can be used for modeling structured clays under compression and shear responses in geological and geotechnical engineering problems.

Keywords

Acknowledgement

Supported by : Thailand Research Fund (TRF)

References

  1. Adachi, T., Oka, F., Hirata, T., Hashimoto, T., Nagaya, J., Mimura, M. and Pradhan, T.B.S. (1995), "Stress-strain behavior and yielding characteristics of eastern Osaka clay", Soils Found., 35(3), 1-13. https://doi.org/10.3208/sandf.35.1.
  2. Anagnostopoulos, A.G., Kalteziotis, N. and Tsiambaos, G.K. (1991), "Geotechnical properties of the Carinth Canal marls", Geotech. Geol. Eng., 9(1), 1-26. https://doi.org/10.1007/BF00880981.
  3. Baudet, B. and Stallebrass, S. (2004), "A constitutive model for structured clays", Geotechnique, 54(4), 269-278. https://doi.org/10.1680/geot.2004.54.4.269.
  4. Burland, J.B. (1990), "On the compressibility and shear strength of natural soils", Geotechnique, 40(3), 329-378. https://doi.org/10.1680/geot.1990.40.3.329.
  5. Callisto, L. and Rampello, S. (2004), "An interpretation of structural degradation for three natural clays", Can. Geotech. J., 41(3), 392-407. https://doi.org/10.1139/t03-099.
  6. Carter, J.P. and Liu, M.D. (2005), "Review of the Structure Cam Clay model. soil constitutive models: evaluation, selection, and calibration", ASCE Geotech. Special Publ., 128, 99-132.
  7. Carter, J.P., Airey, D.W. and Fahey, M. (2000), A Review of Laboratory Testing of Calcareous Soils, in Engineering for Calcareous Sediments, 401-431.
  8. Chai, J.C., Shen, S.L., Zhu, H.H. and Zhnag, X.L. (2004), "Land subsidence due to groundwater drawdown in Shanghai", Geotechnique, 54(2), 143-147. https://doi.org/10.1680/geot.2004.54.2.143
  9. Chen, B., Xu, Q. and Sun, D. (2014), "An elastoplastic model for structured clays", Geomech. Eng., 7(2), 213-231. https://doi.org/10.12989/gae.2014.7.2.213.
  10. Cheng, X. and Wang, J. (2016), "An elastoplastic bounding surface model for the cyclic undrained behavior of saturated soft clays", Geomech. Eng., 11(3), 325-343. https://doi.org/10.12989/gae.2016.11.3.325.
  11. Cotecchia, F. and Chandler, R.J. (2000), "A general framework for the mechanical behaviour of clays", Geotechnique, 50(4), 431-447. https://doi.org/10.1680/geot.2000.50.4.431
  12. Dafalias, Y.F. and Popov, E.P. (1975), "A model of non-linearly hardening materials for complex loading", Acta Mechanica, 21(3), 173-192. https://doi.org/10.1007/BF01181053.
  13. Eigenbrod, K.D. and Burak, J.B. (1991), "Effective stress paths and pore-pressure responses during undrained shear along the bedding planes of varved Fort William clay", Can. Geotech. J., 28(6), 804-811. https://doi.org/10.1139/t91-097.
  14. Gajo, A. and Muir Wood, D. (2001), "A new approach to anisotropic, bounding surface plasticity: general formulation and simulations of natural and reconstituted clay behavior", Int. J. Numer. Anal. Meth. Geomech., 25(3), 207-241. https://doi.org/10.1002/nag.126.
  15. Gens, A. and Nova, R. (1993), "Conceptual bases for constitutive model for bonded soil and weak rocks", Proceedings of the International Symposium on Geotechnical Engineering of Hard Soil-Soft Rocks, Athens, Greece, September.
  16. Gylland, A., Long, M., Emdal, A. and Sandven, R. (2013), "Characterisation and engineering properties of Tiller clay", Eng. Geol., 164, 86-100. https://doi.org/10.1016/j.enggeo.2013.06.008.
  17. Hashiguchi, K. (1980), "Constitutive equations of elastoplastic materials with elastic-plastic translation", J. Appl. Mech., 47, 266-272. https://doi.org/10.1115/1.3153653.
  18. Herbstova, V. and Herle, I. (2009), "Structure transitions of clay fills in North-Western Bohemia", Eng. Geol., 104(3-4), 157-166. https://doi.org/10.1016/j.enggeo.2008.10.001
  19. Horpibulsuk, S., Shibuya, S., Fuenkajorn, K. and Katkan, W. (2007), "Assessment of engineering properties of Bangkok clay", Can. Geotech. J., 44(2), 173-187. https://doi.org/10.1139/t06-101.
  20. Kavvadas, M. and Amorosi, A. (2000), "A constitutive model for structured soils", Geotechnique, 50(3), 263-273. https://doi.org/10.1680/geot.2000.50.3.263.
  21. Kim, S.R. (1991), "Stress-strain behaviour and strength characteristics of lightly overconsolidated clays", Ph.D. Dissertation, Asian Institute of Technology, Bangkok, Thailand.
  22. Leroueil, S. and Vaughan, P.R. (1990), "The general and congruent effects of structure in natural soils and week rock", Geotechnique, 40(3), 467-488. https://doi.org/10.1680/geot.1990.40.3.467.
  23. Liu, M.D. and Carter, J.P. (1999), "Virgin compression of structured soils", Geotechnique, 49(1), 43-57. https://doi.org/10.1680/geot.1999.49.1.43.
  24. Liu, M.D. and Carter, J.P. (2000), "Modeling the destructuring of soils during virgin compression", Geotechnique, 50(4), 479-483. https://doi.org/10.1680/geot.2000.50.4.479
  25. Liu, M.D. and Carter, J.P. (2002), "A structured Cam Clay model", Can. Geotech. J., 39(6), 1313-1332. https://doi.org/10.1139/t02-069.
  26. Liu, M.D. and Carter, J.P. (2003), "Volumetric deformation of natural clays", Int. J. Geomech., 3(2), 236-252. https://doi.org/10.1061/(ASCE)1532-3641(2003)3:2(236).
  27. Liu, M.D., Carter, J.P., Horpibulsuk, S and Liyanapathirana, D. (2006), "Modelling the behaviour of cemented clay", Geotech. Special Publ., 65-72.
  28. Locat, J. and Lefebvre, G. (1985), "The compressibility and sensitivity of an artificially sedimented clay soil: The Grande-Baleine marine clay, Quebec", Mar. Geotechnol., 6(1), 1-27. https://doi.org/10.1080/10641198509388178
  29. Mitchell, R.J. (1970), "On the yielding and mechanical strength of Leda clays", Can. Geotech. J., 7(3), 297-312. https://doi.org/10.1139/t70-036.
  30. Ouria, A. (2017), "Disturbed state concept-based constitutive model for structured soils", Int. J. Geomech., 17(7), 04017008. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000883.
  31. Park, D. (2016), "Rate of softening and sensitivity for weakly cemented sensitive clays", Geomech. Eng., 10(6), 827-836. https://doi.org/10.12989/gae.2016.10.6.827
  32. Rampello, S. and Callisto, L. (1998), "A study on the subsoil of the tower of Pisa based on results from standard and high-quality samples", Can. Geotech. J., 35(6), 1074-1092. https://doi.org/10.1139/t98-055.
  33. Roscoe, K.H. and Burland, J.B. (1968), "On the generalised stress-strain behaviour of wet clay", Eng. Plasticity, 535-609.
  34. Roscoe, K.H. and Schofield, A.N. (1963). "Mechanical behaviour of an idealised wet clay", Proceedings of the European Conference on Soil Mechanics and Foundation Engineering, Wiesbaden, Germany.
  35. Rouainia, M. and Muir Wood, D. (2000), "A kinematic hardening constitutive model for natural clays with loss of structure", Geotechnique, 50(2), 153-164. https://doi.org/10.1680/geot.2000.50.2.153.
  36. Sangrey, D.A. (1972), "Naturally cemented sensitive soils", Geotechnique, 22(1), 139-152. https://doi.org/10.1680/geot.1972.22.1.139.
  37. Schmertmann, J.H. (1991), "The mechanical aging of soils", J. Geotech. Eng., 117(9), 1288-1330. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:9(1288).
  38. Schofield, A.N. and Wroth, C.P. (1968), Critical State Soil Mechanics, McGraw-Hill, London, U.K.
  39. Shen, S.L. and Xu, Y.S. (2011), "Numerical evaluation of land subsidence induced by groundwater pumping in Shanghai", Can. Geotech. J., 48(9), 1378-1392. https://doi.org/10.1139/t11-049.
  40. Shen, S.L., Ma, L., Xu, Y.S. and Yin, Z.Y. (2013), "Interpretation of increased deformation rate in aquifer IV due to groundwater pumping in Shanghai", Can. Geotech. J., 50(11), 1129-1142. https://doi.org/10.1139/cgj-2013-0042.
  41. Sivakumar, V., Doran, I.G. and Graham, J. (2002), "Particle orientation and its influence on the mechanical behaviour of isotropically consolidated reconstituted clay", Eng. Geol., 66(3-4), 197-202. https://doi.org/10.1016/S0013-7952(02)00040-6.
  42. Smith, P.R. (1992), "The behaviour of natural high compressibility clays with special reference to consolidation on soft ground", Ph.D. Thesis, University of London, London, U.K.
  43. Suebsuk, J., Horpibulsuk, S. and Liu, M.D. (2011), "A critical state model for overconsolidated structured clay", Comput. Geotech., 38(5), 648-658. https://doi.org/10.1016/j.compgeo.2011.03.010.
  44. Sun, D., Chen, L., Zhang, J. and Zhou, A. (2015), "Bifurcation analysis of over-consolidated clays in different stress paths and drainage conditions", Geomech. Eng., 9(5), 669-685. https://doi.org/10.12989/gae.2015.9.5.669
  45. Terzaghi, K. (1953), "Fifty years of subsoil exploration", Proceedings of the 3rd International Conference on Soil Mechanics and Foundation Engineering, Switzerland, August.
  46. Yao, Y.P. and Zhou, A.N. (2013), "Non-isothermal unified hardening model: A thermo-elastoplastic model for clay", Geotechnique, 63(15), 1328-1345. http://dx.doi.org/10.1680/geot.13.P.035.
  47. Yao, Y.P., Hou, W. and Zhou, A.N. (2009), "UH model: Threedimensional unified hardening model for overconsolidated clays", Geotechnique, 59(5), 451-469. https://doi.org/10.1680/geot.2007.00029.
  48. Yao, Y.P., Sun, D.A. and Matsuoka, H. (2008), "A unified constitutive model for both clay and sand with hardening parameter independent on stress path", Comput. Geotech., 35(2), 210-222. https://doi.org/10.1016/j.compgeo.2007.04.003.
  49. Zhang, H., Chen, Q., Chen, J. and Wang, J. (2017), "Application of a modified structural clay model considering anisotropy to embankment behavior", Geomech. Eng., 13(1), 79-97. https://doi.org/10.12989/gae.2017.13.1.079.
  50. Zhu, E.Y. and Yao, Y.P. (2015), "Structured UH model for clays", Transportation Geotech. 3, 68-79. https://doi.org/10.1016/j.trgeo.2015.03.003.