DOI QR코드

DOI QR Code

Buckling of simply supported thin plate with variable thickness under bi-axial compression using perturbation technique

  • Fan, Haigui (School of Chemical Machinery and Safety Engineering, Dalian University of Technology) ;
  • Chen, Zhiping (Institute of Process Equipment, Zhejiang University) ;
  • Wang, Zewu (School of Chemical Machinery and Safety Engineering, Dalian University of Technology) ;
  • Liu, Peiqi (School of Chemical Machinery and Safety Engineering, Dalian University of Technology)
  • 투고 : 2019.01.13
  • 심사 : 2019.03.05
  • 발행 : 2019.06.10

초록

An analytical research on buckling of simply supported thin plate with variable thickness under bi-axial compression is presented in this paper. Combining the perturbation technique, Fourier series expansion and Galerkin methods, the linear governing differential equation of the plate with arbitrary thickness variation under bi-axial compression is solved and the analytical expression of the critical buckling load is obtained. Based on that, numerical analysis is carried out for the plates with different thickness variation forms and aspect ratios under different bi-axial compressions. Four different thickness variation forms including linear, parabolic, stepped and trigonometric have been considered in this paper. The calculated critical buckling loads and buckling modes are presented and compared with the published results in the tables and figures. It shows that the analytical expressions derived by the theoretical method in this paper can be effectively used for buckling analysis of simply supported thin plates with arbitrary thickness variation, especially for the stepped thickness that used in engineering widely.

키워드

과제정보

연구 과제 주관 기관 : Central Universities, China Postdoctoral Science Foundation

참고문헌

  1. Azhari, M., Shahidi, A.R. and Saadatpour, M.M. (2005), "Local and post local buckling of stepped and perforated thin plates", Appl. Math. Model., 29(7), 633-652. https://doi.org/10.1016/j.apm.2004.10.004
  2. Chehil, D.S. and Dua S.S. (1973), "Buckling of rectangular plates with general variation in thickness", J. Appl. Mech.-T. ASME, 40(3), 745-751. https://doi.org/10.1115/1.3423084
  3. Chen, L., Rotter, J.M. and Doerich-Stavridis, C. (2012), "Practical calculations for uniform external pressure buckling in cylindrical shells with stepped walls", Thin Wall. Struct., 61, 162-168. https://doi.org/10.1016/j.tws.2012.07.009
  4. Eisenberger, M. and Alexandrov, A. (2003), "Buckling loads of variable thickness thin isotropic plates", Thin Wall. Struct., 41(9), 871-889. https://doi.org/10.1016/S0263-8231(03)00027-2
  5. Gong, J., Tao, J., Zhao, J., Zeng, S. and Jin, T. (2013), "Buckling analysis of open top tanks subjected to harmonic settlement", Thin Wall. Struct., 63, 37-43. https://doi.org/10.1016/j.tws.2012.09.009
  6. Kobayashi, H. and Sonoda, K. (1990), "Buckling of rectangular plates with tapered thickness", J. Struct. Eng.-ASCE, 116(5), 1278-1289. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1278)
  7. Li, R., Zheng, X., Wang, H., Xiong, S., Yan, K. and Li, P. (2018), "New analytic buckling solutions of rectangular thin plates with all edges free", Int. J. Mech. Sci., 144, 67-73. https://doi.org/10.1016/j.ijmecsci.2018.05.041
  8. Minh, P.P., Van Do, T., Duc, D.H. and Nguyen, D.D. (2018), "The stability of cracked rectangular plate with variable thickness using phase field method", Thin Wall. Struct., 129, 157-165. https://doi.org/10.1016/j.tws.2018.03.028
  9. Navaneethakrishnan, P.V. (1988), "Buckling of nonuniform plates: spline method", J. Eng. Mech.-ASCE, 114(5), 893-898. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:5(893)
  10. Nerantzaki, M.S. and Katsikadelis, J.T. (1996), "Buckling of plates with variable thickness-an analog equation solution", Eng. Anal. Bound. Elem., 18(2), 149-154. https://doi.org/10.1016/S0955-7997(96)00045-8
  11. Rajasekaran, S. and Wilson, A. J. (2013), "Buckling and vibration of rectangular plates of variable thickness with different end conditions by finite difference technique", Struct. Eng. Mech., 46(2), 269-294. https://doi.org/10.12989/sem.2013.46.2.269
  12. Saeidifar, M., Sadeghi, S.N. and Sayiz, M.R. (2010), "Analytical solution for the buckling of rectangular plates under uni-axial compression with variable thickness and elasticity modulus in the y-direction", P. I. Mech. Eng. C-J. Mec., 224(1), 33-41. https://doi.org/10.1243/09544062JMES1562
  13. Wang, B., Li, P. and Li, R. (2016), "Symplectic superposition method for new analytic buckling solutions of rectangular thin plates", Int. J. Mech. Sci., 119, 432-441. https://doi.org/10.1016/j.ijmecsci.2016.11.006
  14. Wang, X., Wang, Y. and Ge, L. (2016), "Accurate buckling analysis of thin rectangular plates under locally distributed compressive edge stresses", Thin Wall. Struct., 100, 81-92. https://doi.org/10.1016/j.tws.2015.12.002
  15. Wilson, A.J. and Rajasekaran, S. (2013), "Elastic stability of all edges clamped stepped and stiffened rectangular plate under uni-axial, bi-axial and shearing forces", Meccanica, 48(10), 2325-2337. https://doi.org/10.1007/s11012-013-9751-6
  16. Wilson, A.J. and Rajasekaran, S. (2014), "Elastic stability of all edges simply supported, stepped and stiffened rectangular plate under Biaxial loading", Appl. Math. Model., 38(2), 479-495. https://doi.org/10.1016/j.apm.2013.06.028
  17. Wittrick, W.H. and Ellen, C.H. (1962), "Buckling of tapered rectangular plates in compression", Ae. Q., 13(4), 308-326.
  18. Xiang, Y. and Wang, C.M. (2002), "Exact buckling and vibration solutions for stepped rectangular plates", J. Sound Vib., 250(3), 503-517. https://doi.org/10.1006/jsvi.2001.3922
  19. Xiang, Y. and Wei, G.W. (2004), "Exact solutions for buckling and vibration of stepped rectangular Mindlin plates", Int. J. Solids Struct., 41, 279-294. https://doi.org/10.1016/j.ijsolstr.2003.09.007

피인용 문헌

  1. A Parametric Study on the Elliptical hole Effects of Laminate Composite Plates under Thermal Buckling Load vol.27, pp.1, 2019, https://doi.org/10.1515/secm-2020-0019
  2. A Parametric Study on the Elliptical hole Effects of Laminate Composite Plates under Thermal Buckling Load vol.27, pp.1, 2019, https://doi.org/10.1515/secm-2020-0019