DOI QR코드

DOI QR Code

가새재 및 부재 연결 조건을 고려한 3차원 가설 동바리 구조물의 신뢰성 해석

Reliability Analysis of Three-Dimensional Temporary Shoring Structures Considering Bracing Member and Member Connection Condition

  • 류선호 (한경대학교 토목안전환경공학과) ;
  • 옥승용 (한경대학교 토목안전환경공학과) ;
  • 김승민 ((주)한경S&C 기업부설연구소)
  • Ryu, Seon-Ho (Department of Civil, Safety and Environmental Engineering, Hankyong National University) ;
  • Ok, Seung-Yong (Department of Civil, Safety and Environmental Engineering & Construction Engineering Research Institute, Hankyong National University) ;
  • Kim, Seung-Min (Hankyung S&C Corporate Research Institute)
  • 투고 : 2018.12.14
  • 심사 : 2019.01.03
  • 발행 : 2019.02.28

초록

This study performs reliability analysis of three-dimensional temporary shoring structures with three different models. The first model represents a field model which does not have diagonal bracing members. The installation of bracing members is often neglected in the field for convenience. The second model corresponds to a design model which has the bracing members with the hinge connection of horizontal and bracing members at joints. The third model is similar to the second model but the hinge connection is replaced with partial rotational stiffness. The reliability analysis results revealed that the vertical members of the three models are safe enough in terms of axial force, but the vertical and horizontal members exhibit a big difference among the three models in terms of combination stress of axial force and bi-axial bending moments. The field model showed significant increase in failure probability for the horizontal member, and thus the results demonstrate that the bracing member should be installed necessarily for the safety of the temporary shoring structures.

키워드

HOJHB0_2019_v34n1_53_f0001.png 이미지

Fig. 1. 3D models of temporary shoring structures.

HOJHB0_2019_v34n1_53_f0002.png 이미지

Fig. 2. Conceptual drawing of failure probability and its 1st -order approximation to limit state function.

HOJHB0_2019_v34n1_53_f0003.png 이미지

Fig. 3. FORM results of M1.

HOJHB0_2019_v34n1_53_f0004.png 이미지

Fig. 4. MCS results of M1.

HOJHB0_2019_v34n1_53_f0005.png 이미지

Fig. 5. FORM resultas of M2.

HOJHB0_2019_v34n1_53_f0006.png 이미지

Fig. 6. MCS results of M2.

HOJHB0_2019_v34n1_53_f0007.png 이미지

Fig. 7. FORM results of M3.

HOJHB0_2019_v34n1_53_f0008.png 이미지

Fig. 8. MCS results of M3.

Table 1. Materials and sectional properties of members for temporary shoring structures

HOJHB0_2019_v34n1_53_t0001.png 이미지

Table 2. Probability distributions of random variables

HOJHB0_2019_v34n1_53_t0002.png 이미지

Table 3. Reliability analysis results of compressive vertical members

HOJHB0_2019_v34n1_53_t0003.png 이미지

Table 4. Reliability analysis results of horizontal members for combination of axial force and bi-axial bending moments

HOJHB0_2019_v34n1_53_t0004.png 이미지

참고문헌

  1. Construction Safety Management Information System, https://www.cosmis.or.kr, Accident Case DB Search.
  2. S. J. Kim, "Structural Safety Analyses for Reused System Supporting Considering Deformation of Vertical Components", Master Thesis, Chungbuk National University, 2013.
  3. G. Y. Kim, J. H. Won and S. H. Kim, "Structural Behavior Analysis of System Supports according to Boundary Condition of Joints between Vertical and Horizontal Members", J. Korean Soc. Saf., Vol. 32, No. 3, pp. 60-65, 2017. https://doi.org/10.14346/JKOSOS.2017.32.3.60
  4. MOLIT, Korean Design Standard, KDS 21 50 00 : 2018, http://www.kcsc.re.kr.
  5. Y. Seong, "A Failure Probability of Temporary Structure", Master Thesis, Myongii University, 2016.
  6. N. Metropolis and S. Ulam, "The Monte Carlo Method", Journal of the American Statistical Association, Vol. 44, No. 247, pp. 335-341, 1949. https://doi.org/10.1080/01621459.1949.10483310
  7. S.-M. Kim, "Three-Dimensional Reliability Analysis of Temporary Shoring Structures", Master Thesis, Hankyong National University, 2018.
  8. A. Der Kiureghian "First- and Second-order Reliability Methods", Engineering Design Reliability Handbook, Edited by E. Nikolaidis, D.M. Ghiocel&S.Singhal, CRC Press, Boca Raton, FL, Chapter 14, 2005.
  9. MOLIT, Korean Design Standard, KDS 14 30 10 : 2016, http://www.kcsc.re.kr.
  10. Midas IT, Midas Civil, Analysis & Design, 2018.
  11. Midas User Support System, MQCS, Analysis Algorithm, http://kor.midasuser.com/civil/.
  12. MOLIT, Korean Design Standard, KDS 14 30 05 : 2016, http://www.kcsc.re.kr.
  13. Y. S. Yang, Y. S. Suh and J. O. Lee, "Structural Reliability Engineering", Seoul National University Press, 2006.
  14. AASHTO, AASHTO LRFD Bridge Design Specifications, 8th Ed., 2017.
  15. Korean Institute of Bridge and Structural Engineers, and Korea Bridge Design and Engineering Research Center, Commentary on Design Specifications for Highway Bridges - Limit State Design Method, 2015.