Geomechanics and Engineering

  • 제18권1호
  • /
  • Pages.29-39
  • /
  • 2019
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Determination of the bearing capacity of model ring footings: Experimental and numerical investigations

  • Turedi, Yakup (Department of Civil Engineering, Iskenderun Technical University) ;
  • Emirler, Buse (Department of Civil Engineering, Cukurova University) ;
  • Ornek, Murat (Department of Civil Engineering, Iskenderun Technical University) ;
  • Yildiz, Abdulazim (Department of Civil Engineering, Cukurova University)
  • 투고 : 2018.09.20
  • 심사 : 2019.04.16
  • 발행 : 2019.05.20
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, it was presented an investigation on the load-settlement and vertical stress analysis of the ring footings on the loose sand bed by conducting both laboratory model tests and numerical analyses. A total of twenty tests were conducted in geotechnical laboratory and numerical analyses of the test models were carried out using the finite element package Plaxis 3D to find the ultimate capacities of the ring footings. Moreover, the results obtained from both foregoing methods were compared with theoretical results given in the literature. The effects of the ring width on bearing capacity of the footings and vertical stresses along the depth were investigated. Consequently, the experimental observations are in a very good agreement with the numerical and theoretical results. The variation in the bearing capacity is little when $r_i/R_o$ <0.3. That means, when the ring width ratio, $r_i/R_o$, is equal to 0.3, this option can provide more economic solutions in the applications of the ring footings. Since, this corresponds to less concrete consumption in the ring footing design.

키워드

과제정보

연구 과제 주관 기관 : TUBITAK (The Scientific and Technological Research Council of Turkey)

참고문헌

  1. Anil, O., Akbas, S.O., Babagiray, S., Gel, A.C. and Durucan, C. (2017), "Experimental and finite element analyses of footings of varying shapes on sand", Geomech. Eng., 12(2), 223-238. https://doi.org/10.12989/gae.2017.12.2.223.
  2. Azmoodeh, S. and Arafati, N. (2015), "The impact of the depth and type of soil granulation above the bearing capacity of the ring footing", Amer. J. Civ. Eng., 3(2), 75-79. https://doi.org/10.11648/j.ajce.s.2015030202.25
  3. Benmebarek, S., Remadna, M.S., Benmebarek, N. and Belounar, L. (2012), "Numerical evaluation of the bearing capacity factor $N'_{\gamma}$ of ring footings", Comput. Geotech., 44, 132-138. https://doi.org/10.1016/j.compgeo.2012.04.004.
  4. Bhaskar, D.R.C., Shukla, S.J. and Dinesh, S. (2015), "A numerical study of foundation depth on contact stresses and settlements for various sub-soils", Proceedings of the 50th Indian Geotechnical Conference, Maharashtra, India, December.
  5. Bolton, M.D. (1986), "The strength and dilatancy of sands", Geotechnique, 36(1), 65-78. https://doi.org/10.1680/geot.1986.36.1.65
  6. Boushehrian, J.H. and Hataf, N. (2003), "Experimental and numerical investigation of the bearing capacity of model circular and ring footings on reinforced sand", Geotext. Geomembranes, 21(4), 241-256. https://doi.org/10.1016/S0266-1144(03)00029-3.
  7. Boussinesq, J.V. (1885), Application des Potentiels a L'etude de L'equilibre et du Mouvement des Solids Elastiques, Gauthier-Villars, France.
  8. Choobbasti, A.J., Hesami, S., Najafi, A., Pirzadeh, S., Farrokhzad, F. and Zahmatkesh, A. (2010), "Numerical evaluation of bearing capacity and settlement of ring footing; Case study of Kazeroon cooling towers", Int. J. Res. Rev. Appl. Sci., 4(3), 263-271.
  9. Davarci, B., Ornek, M. and Turedi, Y. (2014), "Model studies of multi-edge footings on geogrid-reinforced sand", Eur. J. Environ. Civ. Eng., 18(2), 190-205. https://doi.org/10.1080/19648189.2013.854726.
  10. Demir, A., Yildiz, A., Laman, M. and Ornek, M. (2014), "Experimental and numerical analyses of circular footing on geogrid-reinforced granular fill underlain by soft clay", Acta Geotechnica, 9(4), 711-723. https://doi.org/10.1007/s11440-013-0207-x.
  11. Dickin, E.A. and Nazir, R. (1999), "Moment-carrying capacity of short pile foundations in cohesionless soil", J. Geotech. Geoenviron. Eng., 125(1), 1-10. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:1(1).
  12. El Sawwaf, M. and Nazir, A. (2012), "Behavior of eccentrically loaded small-scale ring footings resting on reinforced layered soil", J. Geotech. Geoenviron. Eng., 138(3), 376-384. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000593.
  13. Hanna, A. and Soliman-Saad, N. (2001), "Effect of compaction duration on the induced stress levels in a laboratory prepared sand bed", Geotech. Test. J., 24(4), 430-438. https://doi.org/10.1520/GTJ11141J.
  14. Hataf, N. and Razavi, M.R. (2003), "Behavior of ring footing on sand", Iran. J. Sci. Technol. Trans. B: Eng., 27, 47-56.
  15. Hazzard, J.F., Yacoub, T.E., Vijayakumar, S. and Curran, J.H. (2007), "Stresses under footings in multi-layered soils: A comparative study", Proceedings of the 60th Canadian Geotechnical Conference, Ottawa, Canada, October.
  16. Kaya, N. and Ornek, M. (2013), "Experimental and numerical studies of T-shaped footings", Acta Geotechnica Slovenica, 10(1), 43-58.
  17. Keshavarz, A. and Kumar, J. (2017), "Bearing capacity computation for a ring foundation using the stress characteristics method", Comput. Geotech., 89, 33-42. https://doi.org/10.1016/j.compgeo.2017.04.006.
  18. Khatri, V.N., Debbarma, S.P., Dutta, R.K. and Mohanty, B. (2017), "Pressure-settlement behavior of square and rectangular skirted footings resting on sand", Geomech. Eng., 12(4), 689-705. https://doi.org/10.12989/gae.2017.12.4.689.
  19. Laman, M. and Yildiz, A. (2003), "Model studies of ring foundations on geogrid-reinforced sand", Geosynth. Int., 10(5), 142-152. https://doi.org/10.1680/gein.2003.10.5.142.
  20. Laman, M. and Yildiz, A. (2007), "Numerical studies of ring foundations on geogrid-reinforced sand", Geosynth. Int., 14(2), 52-64. https://doi.org/10.1680/gein.2007.14.2.52.
  21. Lee, J.K., Jeong, S. and Lee, S. (2016), "Undrained bearing capacity factors for ring footings in heterogeneous soil", Comput. Geotech., 75, 103-111. https://doi.org/10.1016/j.compgeo.2016.01.021.
  22. Moayed, R.Z., Rashidian, V. and Izadi, E. (2012), "Evaluation on bearing capacity of ring foundations on two-layered soil", World Acad. Sci. Eng. Technol., 61, 954-958.
  23. Naderi, E. and Hataf, N. (2014), "Model testing and numerical investigation of interference effect of closely spaced ring and circular footings on reinforced sand", Geotext. Geomembranes, 42(3), 191-200. https://doi.org/10.1016/j.geotexmem.2013.12.010.
  24. Nichols, T.A., Bailey, A.C., Johnson, C.E. and Grisso, R.D. (1987), "A stress state transducer for soil", Trans. ASAE, 30(5), 1237-1241. https://doi.org/10.13031/2013.30551.
  25. Ohri, M.L., Purhit, D.G.M. and Dubey, M.L. (1997), "Behavior of ring footings on dune sand overlying dense sand", Proceedings of the 4th International Conference on Civil Engineering, Tehran, Iran.
  26. Ornek, M., Laman, M., Demir, A. and Yildiz, A. (2012), "Prediction of bearing capacity of circular footings on soft clay stabilized with granular soil", Soil. Found., 52(1), 69-80. https://doi.org/10.1016/j.sandf.2012.01.002.
  27. Plaxis 3D (2016), Geotechnical Finite Element Software, Delft, The Netherlands.
  28. Sargazi, O. and Hosseininia, E.S. (2017), "Bearing capacity of ring footings on cohesionless soil under eccentric load", Comput. Geotech., 92, 169-178. https://doi.org/10.1016/j.compgeo.2017.08.003.
  29. Turedi, Y. (2015), "Stress analyses in different loading and geometry conditions", M.Sc. Thesis, Mustafa Kemal University, Hatay, Turkey.
  30. Turedi, Y. and Ornek, M. (2016), "Investigation of stress distributions under circular footings", 4th International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, Nicosia, Cyprus, June.
  31. Venkataramaiah, C. (2006), Geotechnical Engineering, New Age International, India.
  32. Westergaard, H.M. (1938), A Problem of Elasticity Suggested by a Problem in Soil Mechanics, Soft Material Reinforced by Numerous Strong Horizontal Sheets, in Contributions to the Nechanics of Solids, Macmillan, U.S.A.
  33. Yodsa-nga, P., Gasaluck, W. and Punrattanasin, P. (2012), "Stress distribution in Khon Kaen loess under spread footing", Elec. J. Geotech. Eng., 17, 3753-3769.