그림 1. Strain 게이지 센서가 내장되는 앵커 볼트 Fig. 1. Anchor bolt embedded strain gauge sensor.
그림 2. 지게차의 앵커 볼트 Fig. 2. Anchor bolt in forklift.
그림 3. Strain 게이지 센서의 회로도 Fig. 3. Circuit diagram of strain gauge sensor.
그림 4. 시험을 위한 시스템 구성 Fig. 4. System configuration for test.
그림 5. 시험 구성 Fig. 5. Setup for test.
그림 6. 시험에 사용된 소프트웨어들 Fig. 6. Softwares used for test.
그림 7. Strain 게이지 센서로부터 얻은 중량 측정치 Fig. 7. Measured weight values from each strain 게이지 sensor.
그림 8. 중량 에 따른 앵커 볼트 변위 측정치 Fig. 8. Displacement of anchor bolt as a function of weight.
그림 9. 무하중 시 시간에 따른 초기 값 변동 Fig. 9. Variation of initial values in case of free-weight.
그림 10. 다항식 보간법을 이용한 초기 값 보정 Fig. 10. Calibration of initial value using polynorminal interpolation.
그림 11. 초기 값 보정 후의 중량에 따른 ADC 측정 값 Fig. 11. Measured ADC values after calibration of initial value.
표 1. ADC의 초기 값과 보정 값 Table 1. Initial values and calibrated values of ACD.
References
- H. J. Cho and Y. K. Kim, "Technologies and industrial trends of smart factory," Weekly Technical Trends, Vol. 1849, pp. 15-25, 2018.
- A. S. Oh, "Smart factory logistics management system using house interior position tracking technology based on Bluetooth beacon," Journal of Korea Institute of Information and Communication Engineering, Vol. 19, No. 11 pp. 2677-2682, Nov. 2015. https://doi.org/10.6109/jkiice.2015.19.11.2677
- J. S. Roh and Y. J. Cho, "IoT platform and control App design for wireless data transmission," Journal of Advanced Navigation Technology, Vol. 21, No. 1, pp. 72-77, Feb. 2017. https://doi.org/10.12673/jant.2017.21.1.72
- C. Y. Yang, Principal of load cell, Control and Measurement, April 2002.