References
- Jiang W, Fan Z, Liu D, Liao D, Dong X and Zong X, Mater. Sci. Eng. A., "Correlation of microstructure with mechanical properties and fracture behavior of A356-T6 aluminum alloy fabricated by expendable pattern shell casting with vacuum and low-pressure, gravity casting and lost foam casting", 560 (2013) 386-403.
- Kumar S, Kumar P and Shan HS, J. Mater. Process. Tech., "Optimization of tensile properties of evaporative pattern casting process through Taguchi's method", 204 (2008) 59-69. https://doi.org/10.1016/j.jmatprotec.2007.10.075
- Saghi S, Divandari M and Kharrazi YHK, Iranian J. Mater. Sci. Eng., "Flow behavior of molten metal in aluminum LFC process", 1 (2004) 39-46.
- Liu Z, Pan Q, Chen Z, Liu X and Tao J, Trans. Nonferrous Met. Soc. China, "Heat transfer characteristics of lost foam casting process of magnesium alloy", 16 (2006) 445-451. https://doi.org/10.1016/S1003-6326(06)60076-9
- Kim JM, Ha TH and Choe KH, J. Korea Foundry Society, "Mechanical properties and mold filling capability of Al-Si-Mg casting alloy fabricated by lost foam casting process", 36 (2016) 153-158. https://doi.org/10.7777/jkfs.2016.36.5.153
- Kim JM, Lee JC, Choi JY, Cho JI and Choe KH, J. Korea Foundry Society, "Mold filling and mechanical properties of thin sectioned Al-Si alloy fabricated by lost foam casting process", 37 (2017) 186-192. https://doi.org/10.7777/JKFS.2017.37.6.186
- Sonnernberg F, Lost foam casting made simple, AFS Technical Publication, USA (2008) 41-57, 173-200.
- Siavashi K, Ph.D. Thesis, Univ. of Birmingham, "The effect of casting parameters on the fluidity and porosity of aluminum alloys in the lost foam casting process", (2011)
- Trumbulovic L, Acimovic Z, Gulisija Z and Andric L, Mater. Letters, "Correlation of technological parameters and quality of castings obtained by the EPC method", 58 (2004) 1726-1731. https://doi.org/10.1016/j.matlet.2003.09.057
- Jafari H, Idris MH and Shayganpour A, Trans. Nonferrous Met. Soc. China, "Evaluation of significant manufacturing parameters in lost foam casting of thin-wall Al-Si-Cu alloy using full factorial design of experiment", 23 (2013) 2843-2851. https://doi.org/10.1016/S1003-6326(13)62805-8
- Samuel AM, Garza-Elizondo GH, Doty HW and Samuel FH, Mater. Design, "Role of modification and melt thermal treatment processes on the microstructure and tensile properties of Al-Si alloys", 60 (2015) 99-108.
- Wang L and Shivkumar S, J. Mater. Sci., "Strontium modification of aluminium alloy castings in the expendable pattern casting process", 30 (1995) 1584-1594. https://doi.org/10.1007/BF00375269
- Akhil KT, Arul S and Sellamuthu R, Procedia Mater. Sci., "The effect of section size on cooling rate, microstructure and mechanical properties of A356 aluminium alloy in casting", 5 (2014) 362-368. https://doi.org/10.1016/j.mspro.2014.07.278
- Sun S, Yuan B and Liu M, Trans. Nonferrous Met. Soc. China, "Effects of moulding sands and wall thickness on microstructure and mechanical properties of Sr-modified A356 aluminum casting alloy", 22 (2012) 1884-1890. https://doi.org/10.1016/S1003-6326(11)61402-7
- Ronald BA, Prakash CA, Karthik MS and Arun KVJ, Perspectives Sci., "Influence of steel shot size on the permeability of mould", 8 (2016) 444-446. https://doi.org/10.1016/j.pisc.2016.04.100