DOI QR코드

DOI QR Code

Simulation of the irradiation effect on hardness of Chinese HTGR A508-3 steels with CPFEM

  • Nie, Junfeng (Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University) ;
  • Lin, Pandong (Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University) ;
  • Liu, Yunpeng (Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University) ;
  • Zhang, Haiquan (Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University) ;
  • Wang, Xin (Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University)
  • Received : 2019.02.24
  • Accepted : 2019.06.16
  • Published : 2019.12.25

Abstract

Understanding the irradiation hardening effect of structural steels under various irradiation conditions plays an important role in developing advanced nuclear systems. Such being the case, a crystal plasticity model for body-centered cubic (BCC) crystal based on the density of dislocations and irradiation defects is summarized and numerically implemented in this paper. Based on this model, nano-indentation hardness of Chinese A508-3 steels with ion irradiation is calculated. Very good agreement is observed between simulation and experimental data of several different irradiation doses subjected to various operating temperatures, from which, it can be concluded that indentation hardness increases with increasing irradiation dose at both room temperature and high temperature. Consequently, the validity of this model has been proved properly, and furthermore, the model established in this paper could guide the study of irradiation hardening effect and temperature effect to some extent.

Keywords

References

  1. W. Guo, M. Schorer, Development of high temperature gas cooled reactor in China, ATW-Int. J. Nucl. Power 63 (2) (2018) 81.
  2. Z. Jiao, S. Taller, K. Field, G. Yeli, M.P. Moody, G.S. Was, Microstructure evolution of T91 irradiated in the BOR60 fast reactor, J. Nucl. Mater. 504 (2018) 122-134. https://doi.org/10.1016/j.jnucmat.2018.03.024
  3. Q. Sahi, Y. Kim, Primary radiation damage characterization of alpha-iron under irradiation temperature for various PKA energies, Mater. Res. Express 5 (4) (2018).
  4. T. Zhang, H. Schut, Z. Li, H. Wang, Z. Zhang, M. He, Positron annihilation and nano-indentation analysis of irradiation effects on the microstructure and hardening of A508-3 steels used in Chinese HTGR, J. Nucl. Sci. Technol. 55 (4) (2018) 418-423. https://doi.org/10.1080/00223131.2017.1403385
  5. O. El-Atwani, E. Esquivel, M. Efe, E. Aydogan, Y.Q. Wang, E. Martinez, et al., Loop and void damage during heavy ion irradiation on nanocrystalline and coarse grained tungsten: microstructure, effect of dpa rate, temperature, and grain size, Acta Mater. 149 (2018) 206-219. https://doi.org/10.1016/j.actamat.2018.02.035
  6. S. Taller, D. Woodley, E. Getto, A.M. Monterrosa, Z. Jiao, O. Toader, et al., Multiple ion beam irradiation for the study of radiation damage in materials, Nucl. Instrum. Methods B 412 (2017) 1-10. https://doi.org/10.1016/j.nimb.2017.08.035
  7. X. Liu, R. Wang, A. Ren, J. Jiang, C. Xu, P. Huang, et al., Evaluation of radiation hardening in ion-irradiated Fe based alloys by nanoindentation, J. Nucl. Mater. 444 (1-3) (2014) 1-6. https://doi.org/10.1016/j.jnucmat.2013.09.026
  8. J.S. Weaver, S. Pathak, A. Reichardt, H.T. Vo, S.A. Maloy, P. Hosemann, et al., Spherical nanoindentation of proton irradiated 304 stainless steel: a comparison of small scale mechanical test techniques for measuring irradiation hardening, J. Nucl. Mater. 493 (2017) 368-379. https://doi.org/10.1016/j.jnucmat.2017.06.031
  9. N.N. Kumar, R. Tewari, P. Mukherjee, N. Gayathri, P.V. Durgaprasad, G.S. Taki, et al., Evaluation of Argon ion irradiation hardening of ferritic/martensitic steel-T91 using nanoindentation, X-ray diffraction and TEM techniques, Radiat. Eff. Defect Solid 172 (7-8) (2017) 678-694. https://doi.org/10.1080/10420150.2017.1379520
  10. X. Xiao, Q. Chen, H. Yang, H. Duan, J. Qu, A mechanistic model for depthdependent hardness of ion irradiated metals, J. Nucl. Mater. 485 (2017) 80-89. https://doi.org/10.1016/j.jnucmat.2016.12.039
  11. A. Kochendoerfer, Theory of crystal plasticity, Z Fur Phys 108 (1938) 244-264. https://doi.org/10.1007/BF01375099
  12. F.T. Meissornnier, E.P. Busso, N.P. O'Dowd, Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains, Int. J. Plast. 17 (2001) 601-640. https://doi.org/10.1016/S0749-6419(00)00064-4
  13. Junfeng Nie, Yunpeng Liu, Qihao Xie, et al., Study on the irradiation effect of mechanical properties of RPV steels using crystal plasticity model, J. Nucl. Sci. Technol. 51 (2) (2019) 501-509.
  14. G.I. Taylor, Plastic strain in metals, J. Inst. Met. 62 (1928) 307-324.
  15. R.J. Asaro, Micro mechanics of crystals and polycrystals, Adv. Appl. Mech. 23 (8) (1983) 11-15.
  16. R. Hill, J.R. Rice, Constitutive analysis of elastic-plastic crystals at arbitrary strain, J. Mech. Phys. Solids 20 (6) (1972) 401-413. https://doi.org/10.1016/0022-5096(72)90017-8
  17. E. Orowan, Problems of plastic gliding, Proc. Phys. Soc. 52 (1940) 8. https://doi.org/10.1088/0959-5309/52/1/303
  18. E. Schmid, W. Boas, Plasticity of Crystals. Plasticity and Textures, Springer, Netherlands, 1950.
  19. M. Kothari, L. Anand, Elasto-viscoplastic constitutive equations for polycrystalline metals: application to Tantalum, J. Mech. Phys. Solids 46 (1) (1998) 51-83. https://doi.org/10.1016/S0022-5096(97)00037-9
  20. U.F. Kocks, A.S. Argon, M.F. Ashby, Thermodynamics and kinetics of slip, in: B. Chalmers, J.W. Christian, T.B. Massalski (Eds.), Progress in Materials Science, vol. 19, Pergamon Press, Oxford, 1975 p.1.
  21. G.I. Taylor, The mechanism of plastic deformation of crystals. Part I. Theoretical, Proc. Roy. Soc. Lond. 145 (855) (1934) 362-387.
  22. G.I. Taylor, Plastic strain in metals, J. Inst. Met. 62 (1938).
  23. C. Deo, C. Tom, R. Lebensohn, S. Maloy, Modeling and simulation of irradiation hardening in structural ferritic steels for advanced nuclear reactors, J. Nucl. Mater. 377 (1) (2008) 136-140. https://doi.org/10.1016/j.jnucmat.2008.02.064
  24. J. Nie, Z. Tang, H. Zhang, H. Li, X. Wang, Crystal plasticity constitutive model for BCC based on the dislocation density, Tsinghua Univ(Sci & Technol) 57 (2017) 780-784.
  25. Anirban Patra, David L. McDowell, Crystal plasticity-based constitutive modelling of irradiated bcc structures, Philos. Mag. A 92 (7) (2011) 861-887. https://doi.org/10.1080/14786435.2011.634855
  26. Hibbitt, Karlsson, and Sorensen, ABAQUS, Inc., Providence, RI, v6.5, 2005.
  27. H.E. Xikou, B. Tian, L. Zhengdong, L. Zhaojie, Effect of heating rate and cooling mode on austenite grain size of 508-3 steel, Hot Work. Technol. 42 (20) (2013) 204-205.
  28. A. Bolshakov, G.M. Pharr, Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques, J. Mater. Res. 13 (4) (1998) 10.
  29. K.C. Tang, A. Faulkner, N. Schwarzer, et al., Comparison between an elasticperfectly plastic finite element model and a purely elastic analytical model for a spherical indenter on a layered substrate[J], Thin Solid Films 300 (1-2) (1997) 177-188. https://doi.org/10.1016/S0040-6090(96)09490-4
  30. Y. Wang, D. Raabe, C. Kluber, H. Roters, Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals, Acta Mater. 52 (8) (2004) 2229-2238. https://doi.org/10.1016/j.actamat.2004.01.016
  31. L. Zhang, Study on Mechanical Properties of Thin Film Nanomechanical Based on ABAQUS Simulation, Jiangsu university, Jiangsu, 2012.
  32. R.A. Johnson, D.J. Oh, Analytic embedded atom method model for BCC metals, J. Mater. Res. 4 (5) (1989) 1195-1201. https://doi.org/10.1557/JMR.1989.1195
  33. S.H. He, B.B. He, K.Y. Zhu, M.X. Huang, Evolution of dislocation density in bainitic steel: modeling and experiments, Acta Mater. 149 (2018) 46-56. https://doi.org/10.1016/j.actamat.2018.02.023
  34. D. Brunner, J. Diehl, Strain-rate and temperature dependence of the tensile flow stress of high-purity ${\alpha}$-Iron above 250 K (Regime I) studied by means of stress-relaxation tests, Physica Status Solidi Applied Research 124 (1) (1991) 155-170. https://doi.org/10.1002/pssa.2211240114
  35. W.A. Spitzig, A.S. Keh, The role of internal and effective stresses in the plastic flow of iron single crystals, Metall. Mater. Trans. B 1 (1970) 3325-3331.
  36. M. Kopernik, A. Milenin, R. Major, J.M. Lakner, Identification of material model of TiN using numerical simulation of nanoindentation test, Metal Science Journal 27 (3) (2011) 604-616.
  37. Jinsheng Pan, Jianmin Tong, Mibo Tian, Materials Science and Engineering, Tsinghua University Press, Beijing, 2010.

Cited by

  1. Study on displacement cascade and tensile simulation by molecular dynamics: Formation and properties of point defects vol.35, pp.10, 2019, https://doi.org/10.1142/s021797922150140x