대한건축학회연합논문집 (Journal of the Regional Association of Architectural Institute of Korea)

대한건축학회지회연합회 (The Regional Association of Architectural Institute of Korea)
권호 표지

국내 모듈러 건축 프로젝트의 단계별 BIM 활용업무 분석

An Analysis of BIM uptake in Each Phase of Modular Construction Projects in Korea

  • 이웅균 (가톨릭관동대학교 건축학부) ;
  • 이명도 ((주)연우테크놀러지 기술연구소)
  • 투고 : 2019.09.26
  • 심사 : 2019.10.07
  • 발행 : 2019.10.25

⟨ 이전 논문 다음 논문 ⟩

초록

Building Information Modeling (BIM) and modular construction are regarded as important technologies that could contribute to overcoming the crisis faced by the construction industry. However, BIM uptake in current modular construction projects is limited. Moreover, there are no specific guidelines to support decision-making regarding the application of BIM in modular construction projects. Therefore, this study aims to analyze the possibility for BIM uptake in each phase of modular construction projects in Korea. Initially, the literature detailing on BIM uptake cases in modular construction projects was reviewed. The detailed work and activities for each phase of a modular project were analyzed via a questionnaire targeting domestic modular experts, to derive items requiring improvement due to errors or changes occurring in the actual project. Ten realistic BIM uptake items were derived, reflecting the results of literature review and expert interviews. Then, the BIM uptake items in each phase were analyzed in terms of necessity and efficiency via a second questionnaire using five-point Likert scales. Finally, the BIM utilization index (BIM UI) of the BIM uptake items was suggested as a priority measure. As a result, the BIM UI of "3D coordination" (U2), "design authoring and reviews for off-site fabrication" (U3), and "detailed 3D modeling for off-site fabrication" (U4), were assigned the highest priority. The results of this study can be used as guidelines to support decision-making regarding the application of BIM in modular construction projects.

키워드

참고문헌

  1. Abanda, F.H., Tah, J.H.M., Cheung, F.K.T. (2017). BIM in off-site manufacturing for buildings. Journal of Building Engineering, 14, pp.89-102. https://doi.org/10.1016/j.jobe.2017.10.002
  2. Lu, N., Korman, T. (2010). Implementation of building information modeling (BIM) in modular construction: Benefits and challenges. In Construction Research Congress 2010: Innovation for Reshaping Construction Practice, pp.1136-1145
  3. Nawari, N.O. (2012). BIM standard in off-site construction. Journal of Architectural Engineering, 18(2), pp.107-113. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000056
  4. Lee, M.D. (2019). Analysis of BIM Utilization for On-site Construction Planning in Modular Construction Project. Journal of the Korea Institute of Building Construction, 19(3), pp.263-272. https://doi.org/10.5345/JKIBC.2019.19.3.263
  5. Shin, H.K., Ahn, Y.H. (2018). Building Information Modeling (BIM) Application for Modular Construction Projects in the Pre-construction Stage. Proceeding of Annual Conference of Korea Institute of Construction Engineering and Management, 11, pp.149-150.
  6. Eastman, C., Teicholz, P., Sacks, R., Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. John Wiley & Sons. 611p.
  7. Lee, J.S. (2017). BIM-based 4D simulation framework to improve module manufacturing productivity for modular construction projects [Ph.D. thesis]. Hanyang University, Korea.
  8. Alwisy, A., Al-Hussein, M. (2010). Automation in drafting and design for modular construction manufacturing utilizing 2D CAD and parametric modeling. In Proc., Computing in Civil and Building Engineering, Proc., Int. Conf.
  9. Ezcan, V., Isikdag, U., Goulding, J. (2013). BIM and off-site manufacturing: recent research and opportunities. In 19th CIB World Building Congress Brisbane, Australia.
  10. Han, S.H. (2014). BIM-based motion planning of mobile crane operation in modular-based heavy construction sites [Ph.D. thesis]. University of Alberta, USA.
  11. Han, S.H., Al-Hussein, M., Al-Jibouri, S., Yu, H. (2012). Automated post-simulation visualization of modular building production assembly line. Automation in construction, 21, pp.229-236. https://doi.org/10.1016/j.autcon.2011.06.007
  12. Han, S.H., Hasan, S., Bouferguene, A., Al-Hussein, M., Kosa, J. (2014). Utilization of 3D visualization of mobile crane operations for modular construction on-site assembly. Journal of Management in Engineering, 31(5), 04014080. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000317
  13. Samarasinghe, T., Mendis, P., Ngo, T., Fernando, W. J. B. S. (2015). BIM software framework for prefabricated construction: case study demonstrating BIM implementation on a modular house. In 6th International Conference On Structural Engineering And Construction Management, pp.154-162.
  14. Korman, T.M., Lu, N. (2011). Innovation and improvements of mechanical, electrical, and plumbing systems for modular construction using building information modeling. In AEI 2011: Building Integration Solutions, pp.448-455.
  15. Moghadam, M., Alwisy, A., Al-Hussein, M. (2012). Integrated BIM/Lean base production line schedule model for modular construction manufacturing. In Construction Research Congress 2012: Construction Challenges in a Flat World, pp.1271-1280.
  16. Solnosky, R.L., Memari, A.M., Ramaji, I.J. (2014). Structural BIM processes for modular multi-story buildings in design and construction. In 2nd residential building design & construction conference, pp.201-215.
  17. Min Woong Kim, In Ho Hwang, Jong Ho Ock. (2013). A Study on Modular System Efficiency usign 5D BIM Tool. Proceeding of Annual Conference of Korea Institute of Building Construction, 13(1), pp.208-209.
  18. Kim, M.W., Jo, B.S., Ock, J.H. (2013). BIM based Life Cycle Mangement Plan for the Unit Modular Method. Korea Institute of Construction Engineering and Management, 11, pp.113-114
  19. Yoon, S.H., Choi, J.W., Cho, S.Y. (2013). A Design and Development of a Temporary Housing System Based on BIM in Advance of Disasters. Journal of the Korean housing association, 24(1), pp.69-78. https://doi.org/10.6107/JKHA.2013.24.1.069
  20. Bong, G.S., Seong, J.B., Seok, H.Y. (2013). A Study on the Reduction Plan About Prefabricated Wall Construction Error Rates for BIM-based Modular Construction. Proceeding of Annual Conference of The Korea Institute of Building Construction, 13(1), pp.213-214.
  21. Jung, Y.H., Ham, N.H., Kim, J,J. (2012). BIM-based modular housing Study on the strategies and deriving techniques. Proceeding of Annual Conference of the Architectural Institute of Korea,, 32(2), pp.185-186.
  22. Cho, S.Y., Choi, J.W., Yun, S.H. (2012). A System Development of Modular Housing and Town for Disaster Based on Building Information Modeling. Proceeding of Annual Conference of Korean Housing Association, 4. pp.261-266.
  23. Seo, B.K., Yun, S.H. (2014). BIM based Optimize Method of Finish Material Placing for Modular Unit. Journal of the Architectural Institute of Korea Structure & Construction, 30(3), pp.97-104. https://doi.org/10.5659/JAIK_SC.2014.30.3.097
  24. Choi, C.S., Jung, J.H., Koh, C.K. (2016) Basic Research on the Modular-based BIM Library customized for the Elderly Housing. Journal of the Korean Institute of Culture Architecture, 55, pp.145-152.
  25. Sel, U.J., Wang, U.C., Jung, J.S., Back, J.H., Lim, S.H. (2016). A Study on Considerations for BIM planning of Modular Building. Proceeding of Annual Conference of the Architectural Institute of Korea, pp.25-26.
  26. Lee, G.K., Lim, S.H. (2011). A Study on the Development of BIM Library about Modular Urban-type Housing. Proceeding of Annual Conference of Korean Housing Association, pp.39-44.
  27. Lee, C.J., Lim, S.H. (2012). A Study on Development of BIM Library for Unit Modular Housing - Focused on Small-sized Urban-life-housing. The Korean Housing Association. 23(6), pp.11-21
  28. Anumba, C., Dubler, C., Goodman, S., Kasprzak, C., Kreider, R., Messner, J., Saluja, C., Zikic, N. (2010). The BIM project execution planning guide and templates-version 2.0. University Park, PA: CIC Research Group, Department of Architectural Engineering, The Pennsylvania State University.
  29. Public Procurement Service. Basic guidelines of the facility business BIM Application v1.31. Korea: Public Procurement Service.
  30. Field, A. (2009). Discovering statistics using SPSS. 3rd ed. London: Sage, 854p.
  31. Jun, K.H., Yun, S.H. (2011). Development construction object library for BIM based building construction planning. Journal of the Architectural Institute of Korea Structure and Construction. 27(9), pp.143-51.
  32. Lee, J.W., Cho, K.M., Kim, T.H. (2017). Identifying construction engineering tasks at the design phase for enhancing constructability in high-rise building construction-focused on temporary work. Journal of the Architectural Institute of Korea Structure and Construction. 17(5), pp.453-63.