한국분말재료학회지 (Journal of Powder Materials)

  • 제26권2호
  • /
  • Pages.156-165
  • /
  • 2019
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

차세대 초고온 합금인 Mo-Si-B 합금의 연구 동향

Research Trends of the Mo-Si-B Alloys as Next Generation Ultra-high-temperature Alloys

  • 최원준 (한양대학교 신소재공학과) ;
  • 박천웅 (한양대학교 신소재공학과) ;
  • 박정효 (국방과학연구소) ;
  • 김영도 (한양대학교 신소재공학과) ;
  • 변종민 (서울과학기술대학교 신소재공학과)
  • Choi, Won June (Department of Materials Science and Engineering, Hanyang University) ;
  • Park, Chun Woong (Department of Materials Science and Engineering, Hanyang University) ;
  • Park, Jung Hyo (Agency for Defense Development) ;
  • Kim, Young Do (Department of Materials Science and Engineering, Hanyang University) ;
  • Byun, Jong Min (Department of Materials Science and Engineering, Seoul National University of Science and Technology)
  • 투고 : 2019.04.23
  • 심사 : 2019.04.26
  • 발행 : 2019.04.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Over the last decade, the next generation's ultra-high-temperature materials as an alternative to Nickel-based superalloys have been highlighted. Ultra-high-temperature materials based on refractory metals are one of several potential candidates. In particular, molybdenum alloys with small amounts of silicon and boron (Mo-Si-B alloys) have superior properties at high temperature. However, research related to Mo-Si-B alloys were mainly conducted by several developed countries but garnered little interest in Korea. Therefore, in this review paper, we introduce the development history of Mo-Si-B alloys briefly and discuss the properties, particularly the mechanical and oxidation properties of Mo-Si-B alloys. We also introduce the latest research trends of Mo-Si-B alloys based on the research paper. Finally, for domestic research related to this field, we explain why Mo-Si-B alloys should be developed and suggest the potential directions for Mo-Si-B alloys research.

키워드

참고문헌

  1. H. Nowotny, E. Dimakopoulou and H. Kudielka: Monatshefte fur Chemie, 88 (1957) 180. https://doi.org/10.1007/BF00901624
  2. P. Jain and K. S. Kumar: Acta Mater., 58 (2010) 2124. https://doi.org/10.1016/j.actamat.2009.11.054
  3. P. Jain and K. S. Kumar: Scr. Mater., 62 (2010) 1. https://doi.org/10.1016/j.scriptamat.2009.09.008
  4. D. Sturm, M. Heilmaier, J. H. Schneibel, P. Jehanno, B. Skrotzki and H. Saage: Mater. Sci. Eng., A, 463 (2007) 107. https://doi.org/10.1016/j.msea.2006.07.153
  5. M. K. Miller, E. A. Kenik, M. S. Mousa, K. F. Russell and A. J. Bryhan: Scr. Mater., 46 (2002) 299. https://doi.org/10.1016/S1359-6462(01)01242-8
  6. M. K. Miller and A. J. Bryhan: Mater. Sci. Eng., A, 327 (2002) 80. https://doi.org/10.1016/S0921-5093(01)01880-9
  7. I. Rosales and J. H. Schneibel: Intermetallics, 8 (2000) 885. https://doi.org/10.1016/S0966-9795(00)00058-3
  8. I. Rosales: J. Cryst. Growth, 310 (2008) 3833. https://doi.org/10.1016/j.jcrysgro.2008.05.044
  9. J. G. Swadener, I. Rosales and J. H. Schneibel: Mater. Res. Soc. Symp. Proc., 646 (2001) N421.
  10. C. J. Rawn, J. H. Schneibel, C. M. Hoffman and C. R. Hubbard: Intermetallics, 9 (2001) 209. https://doi.org/10.1016/S0966-9795(00)00113-8
  11. R. Sakidja, J. H. Perepezko, S. Kim and N. Sekido: Acta Mater., 56 (2008) 5223. https://doi.org/10.1016/j.actamat.2008.07.015
  12. K. Ito, K. Ihara, K. Tanaka, M. Fujikura and M. Yamaguchi: Intermetallics, 9 (2001) 591. https://doi.org/10.1016/S0966-9795(01)00049-8
  13. M. Akinc, M. K. Meyer, M. J. Kramer, A. J. Thom, J. J. Huebsch, and B. Cook: Mater. Sci. Eng., A, 261 (1999) 16. https://doi.org/10.1016/S0921-5093(98)01045-4
  14. D.M. Berczik: US, US5595616A (1997).
  15. D.M. Berczik: EP, EP0804627B1 (1995).
  16. A. Wiltner, B. Kloden, I. Hilger, T. Weissgarber and B. Kieback: J. Am. Ceram. Soc., 98 (2015) 3569. https://doi.org/10.1111/jace.13764
  17. P. G. Biragoni and M. Heilmaier: Adv. Eng. Mater., 9 (2007) 882. https://doi.org/10.1002/adem.200700133
  18. T. G. Nieh, J. G. Wang and C. T. Liu: Intermetallics, 9 (2001) 73. https://doi.org/10.1016/S0966-9795(00)00098-4
  19. P. Jehanno, M. Heilmaier, H. Kestler, M. Boning, A. Venskutonis, B. Belway and M. Jackson: Metall. Mater. Trans. A, 36 (2005) 515. https://doi.org/10.1007/s11661-005-0165-5
  20. M. Kruger, S. Franz, H. Saage, M. Heilmaier, J. H. Schneibel, P. Jehanno, M. Boning and H. Kestler: Intermetallics, 16 (2008) 933. https://doi.org/10.1016/j.intermet.2008.04.015
  21. J. J. Kruzic, J. H. Schneibel and R. O. Ritchie: Metall. Mater. Trans. A, 36 (2005) 2393. https://doi.org/10.1007/s11661-005-0112-5
  22. T. A. Parthasarathy, M. G. Mendiratta and D. M. Dimiduk: Acta Mater., 50 (2002) 1857. https://doi.org/10.1016/S1359-6454(02)00039-3
  23. D. M. Dimiduk and J. H. Perepezko: MRS Bull., 28 (2003) 639. https://doi.org/10.1557/mrs2003.191
  24. F. A. Rioult, S. D. Imhoff, R. Sakidja and J. H. Perepezko: Acta Mater., 57 (2009) 4600. https://doi.org/10.1016/j.actamat.2009.06.036
  25. F. Wang, A. Shan, X. Dong and J. Wu: Scr. Mater., 56 (2007) 737. https://doi.org/10.1016/j.scriptamat.2007.01.025
  26. V. Supatarawanich, D. R. Johnson and C. T. Liu: Mater. Sci. Eng., A, 344 (2003) 328. https://doi.org/10.1016/S0921-5093(02)00446-X
  27. V. Supatarawanich, D. R. Johnson and C. T. Liu: Intermetallics, 12 (2004) 721. https://doi.org/10.1016/j.intermet.2004.02.011
  28. P. Jehanno, M. Heilmaier, H. Saage, M. Boning, H. Kestler, J. Freudenberger and S. Drawin: Mater. Sci. Eng., A, 463 (2007) 216. https://doi.org/10.1016/j.msea.2006.08.125
  29. P. Jehanno, M. Heilmaier, H. Saage, H. Heyse, M. Boning, H. Kestler and J. H. Schneibel: Scr. Mater., 55 (2006) 525. https://doi.org/10.1016/j.scriptamat.2006.05.033
  30. M. Kruger, D. Schliephake, P. Jain, K. S. Kumar, G. Schumacher and M. Heilmaier: JOM, 65 (2013) 301. https://doi.org/10.1007/s11837-012-0475-1
  31. C. Hochmuth, D. Schliephake, R. Volkl, M. Heilmaier and U. Glatzel: Intermetallics, 48 (2014) 3. https://doi.org/10.1016/j.intermet.2013.08.017
  32. D. Schliephake, M. Azim, K. Von Klinski-Wetzel, B. Gorr, H. J. Christ, H. Bei, E. P. George and M. Heilmaier: Metall. Mater. Trans. A, 45 (2014) 1102. https://doi.org/10.1007/s11661-013-1944-z
  33. M. Heilmaier, M. Kruger and H. Saage: Mater. Sci. Forum, 633-634 (2010) 549.
  34. P. Jehanno, M. Boning, H. Kestler, M. Heilmaier, H. Saage and M. Kruger: Powder Metall., 51 (2008) 99. https://doi.org/10.1179/174329008X313379
  35. D. M. Scruggs: US US3320036 (1967).
  36. J. H. Schneibel, M. P. Brady, J. J. Kruzic and R. O. Ritchie: Z. Metallkunde, 96 (2005) 632. https://doi.org/10.3139/146.101081
  37. I. M. Gunter, J. H. Schneibel and J. J. Kruzic: Mater. Sci. Eng., A, 458 (2007) 275. https://doi.org/10.1016/j.msea.2006.12.128
  38. Z. Guo-jun, D. Qian, K. Hao, W. Rui-hong, L. Gang and S. Jun: J. Alloys Compd., 577S (2013) S493.
  39. S. Paswan, R. Mitra and S. K. Roy: Mater. Sci. Eng., A, 424 (2006) 251. https://doi.org/10.1016/j.msea.2006.03.014
  40. S. Paswan, R. Mitra and S. K. Roy: Intermetallics, 15 (2007) 1217. https://doi.org/10.1016/j.intermet.2007.02.012
  41. S. Paswan, R. Mitra and S. K. Roy: Metall. Mater. Trans. A, 40 (2009) 2644. https://doi.org/10.1007/s11661-009-9946-6
  42. S. R. Woodward, R. Raban, J. F. Myers and D. M. Berzcik: US US6652674 (2003).
  43. S. Burk, B. Gorr, V. B. Trindade, H. J. Christ: Oxid. Met., 73 (2010) 163. https://doi.org/10.1007/s11085-009-9175-9
  44. Y. Yang, H. Bei, S. Chen, E. P. George, J. Tiley and Y. A. Chang: Acta Mater., 58 (2010) 541. https://doi.org/10.1016/j.actamat.2009.09.032
  45. H. Saage, M. Kruger, D. Sturm, M. Heilmaier, J. H. Schneibel, E. George, L. Heatherly, Ch. Somsen, G. Eggeler and Y. Yang: Acta Mater., 57 (2009) 3895. https://doi.org/10.1016/j.actamat.2009.04.040
  46. S. Majumdar, A. Kumar, D. Schliephake, H. J. Christ, X. Jiang and M. Heilmaier: Mater. Sci. Eng., A, 573 (2013) 257. https://doi.org/10.1016/j.msea.2013.02.053
  47. S. Majumdar, S. Burk, D. Schliephake, M. Kruger, H. J. Christ and M. Heilmaier: Oxid. Met., 80 (2013) 219. https://doi.org/10.1007/s11085-013-9374-2
  48. W. Li, G. Zhang, S. Wang, B. Li and J. Sun: J. Alloys Compd., 642 (2015) 34. https://doi.org/10.1016/j.jallcom.2015.04.047
  49. Z. Guo-jun, K. Hao, D. Qian, L. Gang and S. Jun: Int. J. Refract. Met. Hard Mater., 30 (2012) 6. https://doi.org/10.1016/j.ijrmhm.2011.06.003
  50. S. Majumdar, B. Gorr, H. J. Christ, D. Schliephake and M. Heilmaier: Corros. Sci., 88 (2014) 360. https://doi.org/10.1016/j.corsci.2014.07.058
  51. S. Majumdar, D. Schliephake, B. Gorr, H. J. Christ and M. Heilmaier: Metall. Mater. Trans. A, 44 (2013) 2243. https://doi.org/10.1007/s11661-012-1589-3
  52. S. Miyamoto, K. Yoshimi, S. H. Ha, T. Kaneko, J. Nakamura, T. Sato, K. Maruyama, R. Tu and T. Goto: Metall. Mater. Trans. A, 45 (2014) 1112. https://doi.org/10.1007/s11661-013-1779-7
  53. K. Yoshimi, J. Nakamura, D. Kanekon, S. Yamamoto, K Maruyama, H. Katsui and T. Goto: JOM, 66 (2014) 1930. https://doi.org/10.1007/s11837-014-1097-6
  54. J. Nakamura, D. Kanekon and K. Yoshimi: Mater. Lett., 180 (2016) 340. https://doi.org/10.1016/j.matlet.2016.04.133
  55. M. A. Azim, S. Burk, B. Gorr, H. J. Christ, D. Schliephake, M. Heilmaier, R. Bornemann and P. H. Bolivar: Oxid. Met., 80 (2013) 231. https://doi.org/10.1007/s11085-013-9375-1
  56. Y. H. Song, J. S. Park, J. M. Kim and S. H. Yi: Mater. Sci. Forum, 695 (2011) 365. https://doi.org/10.4028/www.scientific.net/MSF.695.365
  57. R. Mitra, A. K. Srivastava, N. E. Prasad and S. Kumari: Intermetallics, 14 (2006) 1461. https://doi.org/10.1016/j.intermet.2006.01.057
  58. R. Sakidja, F. Rioult, J. Werner and J. H. Perepezko: Scr. Mater., 55 (2006) 903. https://doi.org/10.1016/j.scriptamat.2006.07.044
  59. K. Ito, M. Kumagai, T. Hayashi and M. Yamaguchi: Scr. Mater., 49 (2003) 285. https://doi.org/10.1016/S1359-6462(03)00289-6
  60. A. P. Alur, R. Sakidja, P. Wang, P. Jain, J. H. Perepezko and K.S. Kumar: Mater. Res. Soc. Symp. Proc., 1295 (2011) 355.
  61. L. Su, O. Lu-Steffes, H. Zhang and J. H. Perepezko: Appl. Surf. Sci., 337 (2015) 38. https://doi.org/10.1016/j.apsusc.2015.02.061
  62. J. Das, R. Mitra and S. K. Roy: Intermetallics, 19 (2011) 1. https://doi.org/10.1016/j.intermet.2010.08.043
  63. J. Das, R. Mitra and S. K. Roy: Scr. Mater., 64 (2011) 486. https://doi.org/10.1016/j.scriptamat.2010.11.022
  64. J. Nakamura, T. Kaneko, T. Hara, K. Yoshimi, K. Maruyama, H. Katsui and T. Goto: Intermetallics, 53 (2014) 85. https://doi.org/10.1016/j.intermet.2014.04.009
  65. T. Sossaman, R. Sakidja, J. H. Perepezko: Scr. Mater., 67 (2012) 891. https://doi.org/10.1016/j.scriptamat.2012.08.019
  66. Z. K. Li, J. L. Yu, X. Zheng, J. J. Zhang, H. Liu, R. Bai, H. Wang, D. H. Wang and W. S. Wang: Powder Technol., 214 (2011) 54. https://doi.org/10.1016/j.powtec.2011.07.033