Fig. 1. P&ID of COG reforming
Fig. 3. Thermodynamic composition and methane conversion of mixed fuel at 850℃, 20 bar, and SCR 3.0
Fig. 4. Effect of pressure and GHSV on the experimental methane conversion of r-COG reforming
Fig. 5. Effect of GHSV on product composition of r-COG reforming at (a) atmospheric pressure, (b) 10 bar, (c) 20 bar
Fig. 2. Thermodynamic composition and methane conversion of r-COG at 850℃, SCR 3.0 and pressure (a) atmospheric pressure, (b) 20 bar
Fig. 6. Effect of feed gas on the product composition at 20 bar, GHSV 20,000 h-1
Fig. 7. Effect of feed gas on thermodynamic and experimental methane conversion at 20 bar and GHSV 20,000 h-1
Table 1. Concentration of mixed feed gas (mol%)
Table 2. Operating condition of experiment
References
-
J. Rogelj, M. den Elzen, N. Hohne, T. Fransen, H. Fekete, H. Winkler, R. Schaeffer, F. Sha, K. Riahi, and M. Meinshausen, "Paris Agreement climate proposals need a boost to keep warming well below
$2^{\circ}C$ ", Nature, Vol. 534, 2016, pp. 631-639, doi: https://doi.org/10.1038/nature18307. -
Intergovernmental Panel on Climate Change IPCC, "Global Warming of
$1.5^{\circ}C$ - Summary for Policymakers", October 8, 2018. Retrieved from https://www.ipcc.ch/sr15/chapter/summary-for-policy-makers/. - S. Yoo, H, Kim, B. Kim, W. Jang, and H. Roh, "The Effect of La2O3 Loading on the Performance of Ni-La2O3-Ce0.8Zr0.2O2 Catalysts for Steam Reforming of Methane", Trans. of the Korean Hydrogen and New Energy Society, Vol. 29, No. 5, 2018, pp. 419-426, doi: https://doi.org/10.7316/KHNES.2018.29.5.419.
-
L. Li, K. Morishita, and T. Takarada, "Conversion of Hot Coke Oven Gas into Light Fuel Gas over Ni/
$Al_2O_3$ Catyalst", Journal of Chemical Engineering of Japan, Vol. 39, No. 4, 2006, pp. 461-468, doi: https://doi.org/10.1252/jcej.39.461. - M. Onozaki, K. Watanabe, T. Hashimoto, H. Saegusa, and Y. Katayama, "Hydrogen production by the partial oxidation and steam reforming of tar from hot coke oven gas", Fuel, Vol. 85, No. 2, 2006, pp. 143-149, doi: https://doi.org/10.1016/j.fuel.2005.02.028.
- Z. Yang, Y. Zhang, X. Wang, Y. Zhang, X. Lu, and W. Ding, "Steam Reforming of Coke Oven Gas for Hydrogen Production over a NiO/MgO Solid Solution Catalyst", Energy & Fuels, Vol. 24, No. 2, 2010, pp. 785-788, doi: https://doi.org/10.1021/ef901034n.
- H. Choi, J. Kim, W. Kim, S. Kim, and D. Koh, "Optimization of Reaction Conditions for the High Purity Hydrogen Production Process Using By-Product Gases in Steel Works", Trans. of the Korean hydrogen and new energy society, Vol. 27, No. 6, 2016, pp. 621-627, doi: https://doi.org/10.7316/khnes.2016.27.6.621.
- S. Lee, J. Bae, S. Lim, and J. Park, "Improved configuration of supported nickel catalysts in a steam reformer for effective hydrogen production from methane", Journal of Power Sources, Vol. 180, No. 1, 2008, pp. 506-515, doi: https://doi.org/10.1016/j.jpowsour.2008.01.081.
- J. Bae, S. Lee, S. Kim, J. Oh, S. Choi, M. Bae, I. Kang, and S. P. Katikaneni, "Liquid fuel processing for hydrogen production: A review", International Journal of Hydrogen Energy, Vol. 41, No. 44, 2016, pp. 19990-20022, doi: https://doi.org/10.1016/j.ijhydene.2016.08.135.
- T. Huang and M. Huang, "Effect of Ni content on hydrogen production via steam reforming of methane over Ni/GDC catalysts", Chemical Engineering Journal, Vol. 145, No. 1, 2008, pp. 149-153, doi: https://doi.org/10.1016/j.cej.2008.07.052.
- S. Tonomura, "Outline of Course 50", Energy Procedia, Vol. 37, 2013, pp. 7160-7167, doi: https://doi.org/10.1016/j.egypro.2013.06.653.
-
M. Abdul Quader, S. Ahmed, S. Z. Dawal, and Y. Nukman, "Present needs, recent progress and future trends of energy-efficient Ultra-Low Carbon Dioxide (
$CO_2$ ) Steelmaking (ULCOS) program", Renewable and Sustainable Energy Reviews, Vol. 55, 2016, pp. 537-549, doi: https://doi.org/10.1016/j.rser.2015.10.101. -
K. Meijer, M. Denys, J. Lasar, J. P. Birat, G. Still, and B. Overmaat, "ULCOS: ultra-low
$CO_2$ steelmaking", Ironmaking & Steelmaking, Vol. 36, No. 4, 2013, pp. 249-251, doi: https://doi.org/10.1179/174328109X439298. - P. Ferreira-Aparicio, M. J. Benito, and J. L. Sanz, "New Trends in Reforming Technologies: from Hydrogen Industrial Plants to Multifuel Microreformers", Catalysis Reviews, Vol. 47, No. 4, 2005, pp. 491-588, doi: https://doi.org/10.1080/01614940500364958.
- S. Kim and J. Bae, "Numerical analysis of a 20-kW e biogas steam reformer in PEMFC applications", International Journal of Hydrogen Energy, Vol. 39, No. 34, 2014, pp. 19485-19493, doi: https://doi.org/10.1016/j.ijhydene.2014.09.137.
-
J. Wei and E. Iglesia, "Isotopic and kinetic assessment of the mechanism of reactions of
$CH_4$ with$CO_2$ or$H_2O$ to form synthesis gas and carbon on nickel catalysts", Journal of Catalysis, Vol. 224, No. 2, 2004, pp. 370-383, doi: https://doi.org/10.1016/j.jcat.2004.02.032.