References
- Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations: current systems and future possibilities. J Am Dent Assoc 2006;137:1289-96. https://doi.org/10.14219/jada.archive.2006.0389
- Lambert H, Durand JC, Jacquot B, Fages M. Dental biomaterials for chairside CAD/CAM: State of the art. J Adv Prosthodont 2017;9:486-95. https://doi.org/10.4047/jap.2017.9.6.486
- Bindl A, Luthy H, Mormann WH. Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dent Mater 2006;22:29-36. https://doi.org/10.1016/j.dental.2005.02.007
- Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014;30:564-9. https://doi.org/10.1016/j.dental.2014.02.019
- Leinfelder KF. Indirect posterior composite resins. Compend Contin Educ Dent 2005;26:495-503.
- Zhi L, Bortolotto T, Krejci I. Comparative in vitro wear resistance of CAD/CAM composite resin and ceramic materials. J Prosthet Dent 2016;115:199-202. https://doi.org/10.1016/j.prosdent.2015.07.011
- Oh WS, Delong R, Anusavice KJ. Factors affecting enamel and ceramic wear: a literature review. J Prosthet Dent 2002;87:451-9. https://doi.org/10.1067/mpr.2002.123851
- Giordano R. Materials for chairside CAD/CAM-produced restorations. J Am Dent Assoc 2006;137:14S-21S. https://doi.org/10.14219/jada.archive.2006.0397
- Isgro G, Pallav P, van der Zel JM, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 2003;90:465-73. https://doi.org/10.1016/j.prosdent.2003.08.003
- Mormann WH, Bindl A. All-ceramic, chair-side computeraided design/computer-aided machining restorations. Dent Clin North Am 2002;46:405-26. https://doi.org/10.1016/S0011-8532(01)00007-6
- Sajewicz E. On evaluation of wear resistance of tooth enamel and dental materials. Wear 2006;260:1256-61. https://doi.org/10.1016/j.wear.2005.08.010
- Quintas AF, Oliveira F, Bottino MA. Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and luting agents: an in vitro evaluation. J Prosthet Dent 2004;92:250-7. https://doi.org/10.1016/j.prosdent.2004.06.023
- Syrek A, Reich G, Ranftl D, Klein C, Cerny B, Brodesser J. Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling. J Dent 2010;38:553-9. https://doi.org/10.1016/j.jdent.2010.03.015
- da Costa JB, Pelogia F, Hagedorn B, Ferracane JL. Evaluation of different methods of optical impression making on the marginal gap of onlays created with CEREC 3D. Oper Dent 2010;35:324-9. https://doi.org/10.2341/09-178-L
- Mou SH, Chai T, Wang JS, Shiau YY. Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns. J Prosthet Dent 2002;87:248-55. https://doi.org/10.1067/mpr.2002.122011
- Nakamura T, Dei N, Kojima T, Wakabayashi K. Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int J Prosthodont 2003;16:244-8.
- Bjorn AL, Bjorn H, Grkovic B. Marginal fit of restorations and its relation to periodontal bone level. II. Crowns. Odontol Revy 1970;21:337-46.
- McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J 1971;131:107-11. https://doi.org/10.1038/sj.bdj.4802708
- Daryakenari G, Alaghehmand H, Bijani A. Effect of simulated mastication on the surface roughness and wear of machinable ceramics and opposing dental enamel. Oper Dent 2019;44:88-95. https://doi.org/10.2341/17-153-L
Cited by
- A Comparative Study of the Fitness and Trueness of a Three-Unit Fixed Dental Prosthesis Fabricated Using Two Digital Workflows vol.9, pp.14, 2019, https://doi.org/10.3390/app9142778
- Ceramic Materials and Technologies Applied to Digital Works in Implant-Supported Restorative Dentistry vol.13, pp.8, 2020, https://doi.org/10.3390/ma13081964
- A State-of-the-Art Review on the Wear of the Occlusal Surfaces of Natural Teeth and Prosthetic Crowns vol.13, pp.16, 2019, https://doi.org/10.3390/ma13163525
- The One-Year In Vivo Comparison of Lithium Disilicate and Zirconium Dioxide Inlays vol.14, pp.11, 2021, https://doi.org/10.3390/ma14113102
- Wear Resistance, Color Stability and Displacement Resistance of Milled PEEK Crowns Compared to Zirconia Crowns under Stimulated Chewing and High-Performance Aging vol.13, pp.21, 2019, https://doi.org/10.3390/polym13213761