DOI QR코드

DOI QR Code

Behavior of full-scale prestressed pile-deck connections for wharves under cyclic loading

  • Blandon, Carlos A. (Department of Civil Engineering, EIA University) ;
  • Krier, Christopher J. (NV5) ;
  • Restrepo, Jose I. (Department of Civil Engineering, University of California San Diego)
  • 투고 : 2018.04.20
  • 심사 : 2019.03.17
  • 발행 : 2019.04.25

초록

The behavior of pile-deck connections of pile-supported marginal wharfs subjected to earthquake loading is of key importance to ensure a good performance of this type of structures. Two precast-pretensioned pile-deck connections used in the construction of pile-supported marginal wharfs were tested under cyclic loading. The first is a connection with simple reinforcement details and light steel ratio developed for use where moderate pile-deck rotation demands are expected in the wharf. The second is specifically developed to sustain the large rotation, shear force and bending moment demands, as required for the shortest piles in a marginal wharf. Data obtained from the test program is used in the paper to calibrate an equivalent plastic hinge length that can be incorporated into nonlinear analysis models of these structures when prestressed pile-deck connections with duct embedded dowels are used.

키워드

참고문헌

  1. American Society of Civil Engineers (ASCE) (2005), Minimum Design Loads for Buildings and Other Structures, ASCE 7-05, American Society of Civil Engineers, Reston, VA.
  2. ASCE/COPRI Committee 61 (2014), Seismic Design of Piers and Wharves, ASCE/COPRI 61-14, American Society of Civil Engineers
  3. Blandon, C.A. (2007), "Seismic analysis and design of pile supported wharves", Ph.D. Dissertation, Centre for Post-Graduate Training and Research in Earthquake Engineering and Engineering Seismology (ROSE School), University of Pavia, Pavia, Italy.
  4. Blandon, C.A., Bell, J., Restrepo, J.I., Jaradat, O., Yin, P. and Weismair, M. (2011), "Assessment of the seismic performance of two pile-deck wharf connections", ASCE J. Perform. Constr. Facil., 25(2), 98-104. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000132
  5. Blandon, C.A., Restrepo, J.I., Kawamata, Y. and Ashford, S. (2013), "Seismic performance of pile-supported wharves?", Spec. Publ., 295, 1-16.
  6. Caiza-Sanchez, P. andrawes, B. and Lafave, J. (2012), "Analytical modeling and damage assessment of shallow embedment pile-deck connections", Adv. Struct. Eng., 15(10), 1673-1687. https://doi.org/10.1260/1369-4332.15.10.1673
  7. Chiaramonte, M.M., Arduino, P., Lehman, D.E. and Roeder, C.W. (2013), "Seismic analyses of conventional and improved marginal wharves", Earthq. Eng. Struct. Dyn., 42(10), 1435-1450. https://doi.org/10.1002/eqe.2280
  8. Doran, B., Shen, J. and Akbas, B. (2015), "Seismic evaluation of existing wharf structures subjected to earthquake excitation: case study", Earthq. Spectra, 31(2), 1177-1194. https://doi.org/10.1193/021713EQS035M
  9. Erdogan, H., Doran, B., Seckin, A., Akbas, B., Celikoglu, Y. and Bostan, T. (2017), "Seismic performance and retrofit evaluation of an existing pile-wharf structure", J. Perform. Constr. Facil., 31(6), 04017110. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001105
  10. Giberson, M. (1967) "The response of nonlinear multistory structures subjected to earthquake excitations", Earthquake Engineering Research Laboratory, Pasadena.
  11. Goel, R.K. (2010), "Approximate seismic displacement capacity of piles in marine oil terminals", Earthq. Struct., 1(1), 129-146. https://doi.org/10.12989/eas.2010.1.1.129
  12. Hines, E.M., Restrepo, J.I. and Seible, F. (2004), "Force-displacement characterization of well confined bridge piers", ACI Struct. J., 101(4), 537-548.
  13. Johnson, G., Harn, R., Lai, C. and Jaradat, O. (2013) "The new ASCE standard for seismic design of piers and wharves", Ports 2013: Success through Diversification, 1345-1354.
  14. Kawamata, Y., Blandon, C.A., Ashford, S. and Restrepo, J.I. (2007), "Seismic performance of container wharf piles for the port of Los Angeles", Test Report, Report No. TR 2007/06, Department of Structural Engineering, University of California, San Diego.
  15. Larosche, A., Cukrov, M., Sanders, D. and Ziehl, P. (2014), "Prestressed pile to bent cap connections: Seismic performance of a full-scale three-pile specimen", J. Bridge Eng., 19(3), 04013012. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000560
  16. Lehman, D.E., Roeder, C., Stringer, S.J. and Jellin, A. (2013), "Seismic performance of improved pile-to-wharf deck connections", PCI J., 53(3), 62-80.
  17. Mander, J.B., Priestley, M.J.N. and Park, R. (1984) "Seismic design of bridge piers", Research Report 84-2, Department of Civil Engineering, University of Canterbury, New Zealand.
  18. Paulay, T. and Priestley, M.J.N. (1992) Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, Inc.
  19. PIANC (2002), Seismic Design Guidelines for Port Structures, A.A. Balkema Publishers.
  20. Port of Long Beach (2012), Port of Long Beach Wharf Design Criteria, POLB WDC, Version 3.0.
  21. Port of Los Angeles (2010), The Port of Los Angeles Seismic Code, The Port of Los Angeles.
  22. Priestley, M.J.N. and Park, R. (1987), "Strength and ductility of concrete bridge columns under seismic loading", ACI Struct. J., 84(1), 61-76.
  23. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridges, John Wiley and Sons, Inc.
  24. Restrepo, J.I., Park, R. and Buchanan, A.H. (1995), "Tests on connections of earthquake resisting precast reinforced concrete perimeter frames of buildings", PCI J., 40(4), 44-61. https://doi.org/10.15554/pcij.07011995.44.61
  25. Roeder, C.W., Graff, R., Soderstrom, J.L. and Yoo, J.H. (2001), "Seismic performance of pile-wharf connections", PEER Report 2002/07, Berkeley, California, December.
  26. Shafieezadeh, A., DesRoches, R., Rix, G.J. and Werner, S.D. (2012), "Seismic performance of pile-supported wharf structures considering soil-structure interaction in liquefied soil", Earthq. Spectra, 28(2), 729-757. https://doi.org/10.1193/1.4000008
  27. Sritharan, S. and Priestley, M.J.N. (1998), "Seismic testing of a full-scale pile-deck connection utilizing headed reinforcement", Report No. TR-98/14, La Jolla, California, August.
  28. Srithartan, S. and Priestley, M.J.N. (1998), "Seismic testing of a full-scale pile-deck connection utilizing headed reinforcement", Report No. TR-98/14, La Jolla, California.
  29. Su, L., Lu, J., Elgamal, A. and Arulmoli, A.K. (2017), "Seismic performance of a pile-supported wharf: Three-dimensional finite element simulation", Soil Dyn. Earthq. Eng., 95, 167-179. https://doi.org/10.1016/j.soildyn.2017.01.009
  30. Wang, T., Yang, Z., Zhao, H. and Wang, W. (2014), "Seismic performance of prestressed high strength concrete pile to pile cap connections", Adv. Struct. Eng., 17(9), 1329-1342. https://doi.org/10.1260/1369-4332.17.9.1329
  31. Yang, Z. and Wang, W. (2016), "Experimental and numerical investigation on the behaviour of prestressed high strength concrete pile-to-pile cap connections", KSCE J. Civil Eng., 20(5), 1903-1912. https://doi.org/10.1007/s12205-015-0658-8
  32. Zhao, J. and Sritharan, S. (2007), "Modeling of strain penetration effects in fiber-based analysis of reinforced concrete structures", ACI Struct. J., 104(2), 133-141.

피인용 문헌

  1. Study on Seismic Performance of Improved High-Strength Concrete Pipe‐Pile Cap Connection vol.2020, 2020, https://doi.org/10.1155/2020/4326208