DOI QR코드

DOI QR Code

Cumulative deformation of high-speed railway bridge pier under repeated earthquakes

  • Gou, Hongye (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Leng, Dan (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Bao, Yi (Department of Civil, Environmental and Ocean Engineering, Stevens Institute of Technology) ;
  • Pu, Qianhui (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University)
  • 투고 : 2018.06.05
  • 심사 : 2019.02.24
  • 발행 : 2019.04.25

초록

Residual deformation of high-speed railway bridge piers is cumulative under repeated earthquakes, and influences the safety and ride comfort of high-speed trains. This paper investigates the effects of the peak ground acceleration, longitudinal reinforcement ratio, and axial compression ratio on the cumulative deformation through finite element analysis. A simply-supported beam bridge pier model is established using nonlinear beam-column elements in OpenSees, and validated against a shaking table test. Repeated earthquakes were input in the model. The results show that the cumulative deformation of the bridge piers under repeated earthquakes increases with the peak ground acceleration and the axial compression ratio, and decreases with the longitudinal reinforcement ratio.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Abdelnaby, A.E. and Elnashai, A.S. (2015), "Numerical modeling and analysis of RC frames subjected to multiple earthquakes", Earthq. Struct., 9(5), 957-981. https://doi.org/10.12989/eas.2015.9.5.957
  2. Aldemir, A., Erberik, M.A., Demirel, I.O. and Sucuoglu, H. (2013), "Seismic performance assessment of unreinforced masonry buildings with a hybrid modeling approach", Earthq. Spectra, 29(1), 33-57. https://doi.org/10.1193/1.4000102
  3. Araki, Y., Shrestha, K.C., Maekawa, N., Koetaka, Y., Omori, T. and Kainuma, R. (2016), "Shaking table tests of steel frame with superelastic Cu-Al-Mn SMA tension braces", Earthq. Eng. Struct., 45(2), 297-314. https://doi.org/10.1002/eqe.2659
  4. Binder, J. and Christopoulos, C. (2018), "Seismic performance of hybrid ductile-rocking braced frame system", Earthq. Eng. Struct., 47(6), 1394-1415. https://doi.org/10.1002/eqe.3022
  5. Chen, L.K., Jiang, L.Z., Yu, Z.W. and Luo, B.F. (2011), "Seismic response characteristics of a high.-speed railway simply supported girder bridge", Earthq. Eng. Eng. Vib., 30(12), 216-222.
  6. Cheng, H., Li, H.N., Wang, D.S., Sun, Z.G., Li, G.Q. and Jin, J.N. (2016), "Research on the influencing factors for residual displacements of RC bridge columns subjected to earthquake loading", B. Earthq. Eng., 14(8), 2229-2257. https://doi.org/10.1007/s10518-016-9902-y
  7. Choi, H., Saiidi, M.S., Somerville, P. and Elazazy, S. (2010), "Experimental study of reinforced concrete bridge columns subjected to near-fault ground motions", Aci Struct. J., 107(1), 3-12.
  8. Chou, C.C. and Liu, J.H. (2012), "Frame and brace action forces on steel corner gusset plate connections in buckling-restrained braced frames", Earthq. Spectra, 28(2), 531-551. https://doi.org/10.1193/1.4000007
  9. Dong, H.H., Du, X.L., Han, Q., Hao, H., Bi, K.M. and Wang, X.Q. (2017), "Performance of an innovative self-centering buckling restrained brace for mitigating seismic responses of bridge structures with double-column piers", Eng. Struct., 148, 47-62. https://doi.org/10.1016/j.engstruct.2017.06.011
  10. Duerr, K., Tesfamariam, S., Wickramasinghe, V. and Grewal, A. (2013), "Variable stiffness smart structure systems to mitigate seismic induced building damages", Earthq. Eng. Struct., 42(2), 221-237. https://doi.org/10.1002/eqe.2204
  11. Eatherton, M.R. and Hajjar, J.F. (2011), "Residual drifts of self-centering systems including effects of ambient building resistance", Earthq. Spectra, 27(3), 719-744. https://doi.org/10.1193/1.3605318
  12. Fahmy, M.F.M., Wu, Z.S., Wu, G. and Sun, Z.Y. (2010), "Post-yield stiffnesses and residual deformations of RC bridge columns reinforced with ordinary rebars and steel fiber composite bars", Eng. Struct., 32(9), 2969-2983. https://doi.org/10.1016/j.engstruct.2010.05.016
  13. Fu, J.P., Wu, Y.T. and Yang, Y.B. (2015), "Effect of reinforcement strength on seismic behavior of concrete moment frames", Earthq. Struct., 9(4), 699-718. https://doi.org/10.12989/eas.2015.9.4.699
  14. GB 18306-2015 (2015), Seismic Ground Motion Parameters Zonation Map of China, Standardization Administration of the People's Republic of China, Beijing, China.
  15. GB 50010-2010 (2010), Code for Design of Concrete Structures, Ministry of Housing and Urban-Rural Construction of the People's Republic of China, Beijing, China.
  16. GB 50011-2010 (2010), Code for Seismic Design of Buildings, Ministry of Construction of the People's Republic of China, Beijing, China.
  17. Gou, H.Y., He, Y.N., Zhou, W., Bao, Y. and Chen, G.D. (2018a), "Experimental and numerical investigations of the dynamic responses of an asymmetrical arch railway bridge", P. I. Mech. Eng. F-J. RAI, 232(9), 2309-2323.
  18. Gou, H.Y., Long, H., Bao, Y., Chen, G.D., Pu, Q.H. and Kang, R. (2018b), "Experimental and numerical studies on stress distributions in girder-arch-pier connections of long-span continuous rigid frame arch railway bridge", J. Bridge Eng., 23(7), 04018039. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001250
  19. Gou, H.Y., Shi, X.Y., Zhou, W., Cui, K. and Pu, Q.H. (2018c), "Dynamic performance of continuous railway bridges: Numerical analyses and field tests", P. I. Mech. Eng. F-J RAI, 232(3), 936-955.
  20. Gou, H.Y., Wang, W., Shi, X.Y., Pu, Q.H. and Kang, R. (2018d), "Behavior of steel-concrete composite cable anchorage system", Steel Compos. Struct., 26(1), 115-123. https://doi.org/10.12989/SCS.2018.26.1.115
  21. Gou, H.Y., Yang, L.C., Leng, D., Bao, Y. and Pu, Q.H. (2018), "Effect of bridge lateral deformation on track geometry of high-speed railway", Steel Compos. Struct., 29(2), 219-229. https://doi.org/10.12989/scs.2018.29.2.219
  22. Gou, H.Y., Zhou, W., Bao, Y., Li, X.B. and Pu, Q.H. (2018f), "Experimental study on dynamic effects of a long-span railway continuous beam bridge", Appl. Sci., 8(5), 669. https://doi.org/10.3390/app8050669
  23. Gou, H.Y., Zhou, W., Chen, G.D, Bao, Y. and Pu, Q.H. (2018e), "In-situ test and dynamic analysis of a double-deck tied-arch bridge", Steel Compos. Struct., 27(1), 161-175.
  24. Guan, K., Zhong, Z.D., Ai, B. and Kurner, T. (2013), "Deterministic propagation modeling for the realistic high-speed railway environment", J. Mol. Biol., 14(2382), 1-5.
  25. Han, Z.F., Ye, A.J. and Fan, L.C. (2010), "Effects of riverbed scour on seismic performance of high-rise pile cap foundation", Earthq. Eng. Eng. Vib., 9(4), 533-543. https://doi.org/10.1007/s11803-010-0035-z
  26. Hatzigeorgiou, G.D., Papagiannopoulos, G.A. and Beskos, D.E. (2011), "Evaluation of maximum seismic displacements of SDOF systems from their residual deformation", Eng. Struct., 33(12), 3422-3431. https://doi.org/10.1016/j.engstruct.2011.07.006
  27. Hu, S.T., Niu, B., Ke, Z.T. and Liu, X.G. (2013), "Study on the optimization of standard span length simply supported box girder for high-speed railway", China Railw. Sci., 34(1), 15-21.
  28. Jamnani, H.H., Amiri, J.V. and Rajabnejad, H. (2018), "Energy distribution in RC shear wall-frame structures subject to repeated earthquakes", Soil Dyn. Earthq. Eng., 107, 116-128. https://doi.org/10.1016/j.soildyn.2018.01.010
  29. JRA (Japan Road Association) (1996), Design Specification of Highway Bridges Part V. Seismic Design, Japan Road Association (JRA), Tyokyo, Japan.
  30. Karavasilis, T.L. and Seo, C.Y. (2011), "Seismic structural and non-structural performance evaluation of highly damped self-centering and conventional systems", Eng. Struct., 33(8), 2248-2258. https://doi.org/10.1016/j.engstruct.2011.04.001
  31. Karsan, I.D. and Jirsa, J.O. (1969), "Behavior of concrete under compressive loading", J. Struct. Div., 95(12), 2543-2564. https://doi.org/10.1061/JSDEAG.0002424
  32. Kostinakis, K. and Morfidis, K. (2017), "The impact of successive earthquakes on the seismic damage of multistorey 3D R/C buildings", Earthq. Struct., 12(1), 1-12. https://doi.org/10.12989/eas.2017.12.1.001
  33. Loh, C.H., Mao, C.H., Huang, J.R. and Pan, T.C. (2011), "System identification of degrading hysteresis of reinforced concrete frames", Earthq. Eng. Struct., 40(6), 623-640. https://doi.org/10.1002/eqe.1051
  34. Loulelis, D., Hatzigeorgiou, G.D. and Beskos, D.E. (2012), "Moment resisting steel frames under repeated earthquakes", Earthq. Struct., 3(3-4), 231-248. https://doi.org/10.12989/eas.2012.3.3_4.231
  35. Moustafa, A. and Takewaki, I. (2012), "Characterization of earthquake ground motion of multiple sequences", Earthq. Struct., 3(5), 629-647. https://doi.org/10.12989/eas.2012.3.5.629
  36. Ning, B., Tang, T., Dong, H.R., Wen, D., Liu, D.R., Gao, S.G. and Wang, J. (2011), "An introduction to parallel control and management for high-speed railway systems", IEEE T. Intell. Tran., 12(4), 1473-1483. https://doi.org/10.1109/TITS.2011.2159789
  37. Noguez, C.A.C. and Saiidi, M.S. (2013), "Performance of advanced materials during earthquake loading tests of a bridge system", J. Struct. Eng., ASCE, 139(1), 144-154. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000611
  38. Popovics, S. (1973), "A numerical approach to the complete stress-strain curve of concrete", Cement Concrete Res., 3(5), 583-599. https://doi.org/10.1016/0008-8846(73)90096-3
  39. Psycharis, I.N., Fragiadakis, M. and Stefanou, I. (2013), "Seismic reliability assessment of classical columns subjected to near source ground motions", Earthq. Eng. Struct., 42(14), 2061-2079.
  40. Romero, A., Galvin, P. and Dominguez, J. (2012), "A time domain analysis of train induced vibrations", Earthq. Struct., 3(3), 297-313. https://doi.org/10.12989/eas.2012.3.3_4.297
  41. Ruiz-Garcia, J. and Miranda, E. (2010), "Probabilistic estimation of residual drift demands for seismic assessment of multi-story framed buildings", Eng. Struct., 32(1), 11-20. https://doi.org/10.1016/j.engstruct.2009.08.010
  42. Shafaei, J., Zareian, M.S., Hosseini, A. and Marefat, M.S. (2014), "Effects of Joint Flexibility on Lateral Response of Reinforced Concrete Frames", Eng. Struct., 81(15),412-431. https://doi.org/10.1016/j.engstruct.2014.09.046
  43. Shin, J.U., Lee, K.H., Lee, D.H. and Jeong, S.H. (2010), "Seismic behavior of a five-story RC structure retrofitted with buckling-restrained braces using time-dependent elements", J. Virol., 14(6), 830-833.
  44. Shrestha, K.C., Araki, Y., Nagae, T., Omori, T., Sutou, Y., Kainuma, R. and Ishida, K. (2011), "Applicability of cu-al-mn shape memory alloy bars to retrofitting of historical masonry constructions", Earthq. Struct., 2(3), 233-256. https://doi.org/10.12989/eas.2011.2.3.233
  45. Sun, L.M., Xie, W.P., He, X.W. and Hayashikawa, T. (2016), "Prediction and mitigation analysis of ground vibration caused by runing high-speed trains on rigid-frame viaducts", Earthq. Eng. Eng. Vib., 15(1), 31-47. https://doi.org/10.1007/s11803-016-0303-7
  46. Tang, Z.Z., Xie, X. and Wang, T. (2016), "Residual seismic performance of steel bridges under earthquake sequence", Earthq. Struct., 11(4), 649-664. https://doi.org/10.12989/eas.2016.11.4.649
  47. TB 10002.1-2005 (2005), Fundamental Code for Design on Railway Bridge and Culvert, Ministry of Railways of the People's Republic of China, Beijing, China.
  48. Tian, X.H., Su, M.Z., Lian, M., Wang, F. and Li, S. (2018), "Seismic behavior of k-shaped eccentrically braced frames with high-strength steel: shaking table testing and fem analysis", J. Constr. Steel Res., 143, 250-263. https://doi.org/10.1016/j.jcsr.2017.12.030
  49. Vu, N.S. and Li, B. (2018), "Seismic performance assessment of corroded reinforced concrete short columns", J. Struct. Eng., ASCE, 144(4), 04018018. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001994
  50. Wang, B. and Zhu, S.Y. (2018), "Seismic behavior of self-centering reinforced concrete wall enabled by superelastic shape memory alloy bars", B. Earthq. Eng., 16(1), 479-502. https://doi.org/10.1007/s10518-017-0213-8
  51. Yan, B., Dai, G.L. and Hu, N. (2015), "Recent development of design and construction of short span high-speed railway bridges in China", Eng. Struct., 100(1), 707-717. https://doi.org/10.1016/j.engstruct.2015.06.050
  52. Zhang, Q. and Alam, M.S. (2016), "Evaluating the seismic behavior of segmental unbounded posttensioned concrete bridge piers using factorial analysis", J. Bridge Eng., 21(4), 04015073. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000851
  53. Zhang, Q., Gong, J.X. and Zhou, J.K. (2017), "Seismic residual deformation analysis of single degree of freedom system based on probability", J. Build. Struct., 38(8), 74-82.
  54. Zhou, D.C., Dong, Z.C., Shao, J.H. and Wang, L. (2014), "Study on displacement ductility performance of RC highway bridge columns", Earthq. Eng. Eng. Vib., 1(3), 62-67.

피인용 문헌

  1. Response modification factor and seismic fragility assessment of skewed multi-span continuous concrete girder bridges vol.20, pp.4, 2021, https://doi.org/10.12989/eas.2021.20.4.389
  2. Optical Fiber Sensors for Monitoring Railway Infrastructures: A Review towards Smart Concept vol.13, pp.12, 2021, https://doi.org/10.3390/sym13122251