Fig. 1. The analysis section of 55 story a high-rise building with adjacent underground structure
Fig. 2. Hachinohe earthquake wave (long wave)
Fig. 3. The comparison of the horizontal displacement distribution of a high-rise building (excitation time = 12 seconds)
Fig. 4. The comparison of acceleration spectra at the top floor (55 floor)
Fig. 5. The comparison of inter-story drift ratio of a high-rise building (excitation time = 12 seconds)
Fig. 6. The tensile bending stress distribution of a high-rise building and the adjacent underground structure computed by MIDAS GTS NX
Fig. 7. The tensile bending stress distribution of a high-rise building and the adjacent underground structure computed by FLAC 2D (PGA 0.154 g, excitation time = 12 seconds)
Table 1. The comparison between two commercial programs in terms of dynamic analysis characteristics
Table 2. Ground properties
Table 3. Properties of building structural members
Table 4. The comparison of the maximum horizontal displacement of a high-rise building (PGA = 0.154 g)
Table 5. Inter-story drift ratio of a high-rise building (excitation time = 12 seconds)
Table 6. The maximum bending stresses of above, below ground part and the adjacent underground structure (excitation time = 12 seconds)
References
- Hwang, T.H. (2000), A comparative study between finite element method and finite difference method on variation of lateral earth pressure in NATM tunnel analysis, Master's Degree, Dankook University Graduate School, Dankook University, pp. 54.
- Itasca Consulting Group, Inc. (2005), Fast lagrangian analysis of continua, Ver. 5.0, Itasca Consulting Group Inc., Minnesota, USA.
- Kim, D.G. (2013), Dynamics of structures, Goomibook, Seoul, pp. 779.
- Koo, H.J., Kim, H.J. (2015), "Natural period and damping ratio of RC buildings for serviceability design", Journal of the Architectural Institute of Korea Structure and Construction, Vol. 31, No. 2, pp. 37-44. https://doi.org/10.5659/JAIK_SC.2015.31.2.37
- Lysmer, J., Kuhlemeyer, R.L. (1969), "Finite dynamic model for infinite media", Journal of the Engineering Mechanics Division, Vol. 95, No. 4, pp. 859-877. https://doi.org/10.1061/JMCEA3.0001144
- MIDAS Information Technology Co. (2012), MIDAS CIVIL user manual, MIDAS Information Technology Co., Korea, pp. 551.
- MIDAS Information Technology Co. (2016), MIDAS GTS NX user manual, MIDAS Information Technology Co., Korea, pp. 445.
- Ministry of Land, Infrastructure and Transport (2016), Concrete standard specification, pp. 358.
- National Disaster Management Research Institute (2012), Development of the public buildings emergency integrity assessment technology using seismic acceleration response signal, National Disaster Management Research Institute, Korea, pp. 253.
- Park, S.S., Moon, H.D., Park, S.H. (2015), "A study on dynamic analyses of cut and cover tunnel during earthquakes", The Korean Society of Engineering Geology, Vol. 25, No. 2, pp. 237-250.
- Son, S.H. (2012), An analysis of effect of vibration in urban tunnel blasting, Master's Degree, Inha University Graduate School, Inha University, pp. 49.
-
Western Metro (2016), Final design of private infrastructure investment project on
${\bigcirc}{\bigcirc}-{\bigcirc}{\bigcirc}$ double track railway (zone 4), Tunnel Analysis Report, pp. 906. - You, K.H., Kim, Y.J. (2018), "A preliminary numerical analysis study on the seismic stability of a building and underground structure by using SSI", Journal of Korean Tunnelling and Underground Space Association, Vol. 20, No. 1, pp. 23-38. https://doi.org/10.9711/KTAJ.2018.20.1.023
- You, K.H., Park, Y.J., Hong, K.Y., Lee, H.K., Kim, J.K. (2005), "Numerical estimation for safety factors of tunnels considering the failure of supports", Journal of Korean Tunnelling and Underground Space Association, Vol. 7, No. 1, pp. 37-49.